Fundamentals of Electronics Engineering (AEC101A) — What This Subject Is
Fundamentals of Electronics Engineering (AEC101A) is the electronics paper of the AKTU B.Tech First Year CSE stream under the new Course Structure V16 (w.e.f. 2026-27). It is a 3-credit theory subject (2-1-0, 45 hours) that covers semiconductors, diodes and rectifiers, transistors, op-amps, digital logic and the analogue-to-digital interface — the hardware layer every computer-science student should understand. It is the most hands-on of the first-year theory papers: its tutorials include building a mobile charger from a rectifier, biasing a transistor, building a non-inverting op-amp amplifier, implementing logic with an Arduino, and interfacing an LDR sensor — real circuits, not only theory.
In the V16 scheme, Electronics Engineering and Electrical Engineering (AEE101A) form an either/or pair: each institute assigns one of the two to a student group. The scheme does not fix which group takes which subject in which semester, so this guide labels the paper B.Tech 1st Year throughout and gives no semester label. The paper carries 70 end-semester marks in 3 hours, plus 30 internal-assessment marks, and all five units carry 20% weightage each — so no unit can be skipped.
Dr. A.P.J. Abdul Kalam Technical University (AKTU), Lucknow • B.Tech First Year, CSE Stream • Course Structure V16 (2026-27) • Session 2026–27

AEC101A at a Glance
| Item | Detail |
|---|---|
| Course code | AEC101A (also listed as AEC201A in the scheme) |
| Subject | Fundamentals of Electronics Engineering |
| Stream | B.Tech First Year, CSE Stream |
| Credits | 3 (L-T-P: 2-1-0) |
| Hours | 45 |
| End-semester theory | 70 marks, 3 hours |
| Internal assessment | 30 marks (class tests + teacher's assessment: assignment / quiz / attendance) |
| Total | 100 marks |
| Units | 5 units, 20% weightage each |
| Either/or pair | Electronics Engineering (AEC101A) / Electrical Engineering (AEE101A) — institute assigns one |
| Scheme | Course Structure V16, w.e.f. 2026-27 (AICTE Model Curriculum & NEP 2020) |
Unit-wise Syllabus
The unit list below is taken from the official AKTU B.Tech First Year CSE Stream Syllabus 2026-27. Every unit carries 20% weightage.
| Unit | Title | Key topics | Weightage |
|---|---|---|---|
| 1 | Semiconductors, Diodes & Rectifiers | Semiconductors — intrinsic, extrinsic, p-type and n-type; PN junction diode — forward bias, reverse bias, V-I characteristics, barrier potential, knee voltage, breakdown; Zener diode and voltage regulation; LED; rectifier — half-wave, full-wave (centre-tapped and bridge); working of a mobile charger; introduction to solar cell (PV cell) | 20% |
| 2 | Transistors & Amplifiers | Bipolar junction transistor (BJT) — construction, types (NPN and PNP), operation, input and output characteristics; transistor as a switch and as an amplifier; amplifier and its classification; operating point and biasing (concept); common-emitter (CE) configuration; voltage gain and current gain (simple numericals); applications — BJT in mobile switching, audio amplifier in a speaker system; FET — construction, operation, V-I characteristics, basic concepts of MOSFET and its types | 20% |
| 3 | Operational Amplifier & Applications | Ideal op-amp — characteristics; concept of virtual ground; inverting and non-inverting amplifier (derivation of gain); summing amplifier; differential amplifier; comparator; op-amp as integrator and differentiator; basic idea of 555 timer and its applications — astable multivibrator, monostable multivibrator (concept) | 20% |
| 4 | Digital Electronics | Number systems — decimal, binary, octal, hexadecimal; conversions (simple numericals); binary addition and subtraction; 1's and 2's complement; Boolean algebra — basic laws, De Morgan's theorems; logic gates — AND, OR, NOT, NAND, NOR, XOR, XNOR; universal gates; implementation of Boolean expressions using gates; Karnaugh map — 2-variable and 3-variable simplification (simple numericals); combinational circuits — half adder, full adder, multiplexer (2:1, 4:1); sequential circuits — basic idea of flip-flops (SR, JK, D, T), registers, counters | 20% |
| 5 | Electronic Measurement, Sensors & Interfacing | Electronic measuring instruments — digital multimeter (DMM), cathode ray oscilloscope (CRO); introduction to ADC and DAC; resolution, quantization error; types — flash ADC, successive approximation ADC; basic working of a DAC (R-2R ladder and weighted resistor); basic idea of PWM (pulse width modulation) and its application in motor speed control and LED brightness control; introduction to sensors — temperature (thermistor), light (LDR), ultrasonic sensors; introduction to microcontrollers — role of Arduino in sensing and automation; block diagram of an embedded system | 20% |
Textbooks suggested by the syllabus: Boylestad & Nashelsky, Electronic Devices and Circuit Theory (Pearson, 2019); Chattopadhyay & Rakshit, Electronics: Fundamentals and Applications (New Age International, 2021); M. Morris Mano, Digital Design (Pearson, 2018); Ramakant A. Gayakwad, Op-Amps and Linear Integrated Circuits (Pearson, 2019). Online resources named in the syllabus: NPTEL Basic Electronics (IIT Kharagpur / IIT Bombay), the Falstad circuit simulator, and Tinkercad circuits.
Exam Pattern
The theory paper carries 70 marks in 3 hours, plus 30 internal-assessment marks (class tests and teacher's assessment — assignment, quiz and attendance). One honest gap: the V16 scheme publishes the marks, the hours and the unit-wise weightage, but no section-wise question pattern — it does not say how many short questions or long questions a paper holds, or how the 70 marks split between them. Any website claiming a fixed AKTU section pattern for this new paper is guessing.
For practice, KAMALDNP uses a clearly labelled practice design inside the verified 70-mark / 3-hour frame: Part A — 10 short questions × 2 marks = 20; Part B — 5 long questions × 10 marks = 50, each with an (a) OR (b) choice. That split is a KAMALDNP practice design, not the university's published pattern. The practical lesson is the same for every subject: prepare every unit, because each unit is worth a fifth of the paper.
No verified previous AKTU paper exists for this subject. The V16 scheme (A-series codes) starts in session 2026-27, so no previous paper under the AEC101A code exists. Old K-series papers belong to a different syllabus and are not used. All questions in the KAMALDNP study material for this subject are original practice questions — the material contains practice/guess sets only.
Exam Dates 2026-27
The AKTU academic calendar (Ref. AKTU/RO/2026/12402, 3 July 2026) places the theory examinations in the window 24 November – 27 December 2026. The subject-wise date sheet has NOT been released as of 18 November 2026, and the admit card has not been released either — so this guide gives no exam date for AEC101A, and no site should. Practical examinations are scheduled 7–24 December 2026, and the result is scheduled around 15 January 2027. When the university posts the date sheet, it will appear on the official AKTU site — check there, not on third-party date lists.
How to Prepare
- Give every unit equal time. All five units carry 20% each — Unit 4 (digital electronics) and Unit 3 (op-amps) are as valuable as Unit 1, and their numericals are among the most scoring questions in the paper.
- Memorise the two rectifier pairs. Half-wave: Vdc = Vm/π, ripple factor 1.21. Full-wave: Vdc = 2Vm/π, ripple factor 0.48. With those four numbers, every Unit 1 numerical is a two-minute question.
- Learn the op-amp gain pair once, properly. Inverting: A = −Rf/R1. Non-inverting: A = 1 + Rf/R1. The minus sign and the "1 +" are the two things students most often forget under exam pressure.
- Practise K-maps by hand. 2-variable and 3-variable simplification, grouping 1s in powers of 2 — do five maps without notes and the method is permanent. Combine it with De Morgan's theorems and NAND/NOR universality for the logic questions.
- Learn the ADC/DAC pair. Resolution = VFS/(2n − 1), quantisation error = ± resolution/2, flash ADC needs 2n − 1 comparators. Three formulas, one guaranteed question in Unit 5.
- Attempt a full 70-mark paper in one 3-hour sitting. The KAMALDNP question bank and practice set for this subject are built in the verified 70-mark frame — attempt them without notes, under time, then check yourself against the answer outlines.
- Do not ignore the internal 30. Class tests, assignments, quizzes and attendance together are nearly a third of the subject's marks.
FAQs
What is the syllabus of AEC101A Fundamentals of Electronics Engineering?
Five units at 20% each: (1) Semiconductors, Diodes & Rectifiers, (2) Transistors & Amplifiers, (3) Operational Amplifier & Applications, (4) Digital Electronics, (5) Electronic Measurement, Sensors & Interfacing (ADC/DAC, PWM, sensors, Arduino). The full unit-wise topic list is in the table above, taken from the official AKTU B.Tech First Year CSE Stream Syllabus 2026-27 (Course Structure V16).
How many marks is the AEC101A paper?
70 marks for the end-semester theory paper (3 hours) plus 30 marks of internal assessment, for 100 marks in total. The subject carries 3 credits (2-1-0, 45 hours).
Is there a fixed question pattern for the AKTU paper?
No. The V16 scheme publishes the marks, hours and unit weightage but no section-wise question pattern. The Part A (10 × 2) / Part B (5 × 10, with (a) OR (b)) split used in KAMALDNP practice material is a labelled practice design inside the verified 70-mark frame, not the university's published pattern.
When is the AEC101A exam in 2026-27?
No subject-wise date exists. The AKTU theory exam window is 24 November – 27 December 2026, and the subject-wise date sheet had not been released as of 18 November 2026. Check the official AKTU site for the date sheet when it appears.
Are previous year papers available for AEC101A?
No. The V16 scheme (A-series codes) starts in session 2026-27, so no previous AKTU paper under the AEC101A code exists. Old K-series papers belong to a different syllabus. The KAMALDNP study material for this subject contains original practice questions only.
Is this subject paired with Electrical Engineering?
Yes. In the V16 scheme, Fundamentals of Electronics Engineering (AEC101A) and Fundamentals of Electrical Engineering (AEE101A) form an either/or pair — each institute assigns one of the two to a student group. The scheme does not fix which group takes which subject in which semester, so this guide gives no semester label.
Related Posts
- Quantum Physics and Applications (AAS101E) — AKTU B.Tech 1st Year Syllabus 2026-27
- Applied Chemistry for Smart Systems (AAS102D) — AKTU B.Tech 1st Year Syllabus 2026-27
- Calculus and Linear Algebra (AAS103D) — AKTU B.Tech 1st Year Syllabus 2026-27
- Numerical Methods (AAS203D) — AKTU B.Tech 1st Year Syllabus 2026-27
- Fundamentals of Electrical Engineering (AEE101A) — AKTU B.Tech 1st Year Syllabus 2026-27
- Programming Languages (ACS101) — AKTU B.Tech 1st Year Syllabus 2026-27
- Essentials of Data Structures (ACS201) — AKTU B.Tech 1st Year Syllabus 2026-27
- Introduction to Indian Knowledge System (AAS104) — AKTU B.Tech 1st Year Syllabus 2026-27
- Professional Communication & Technical Writing (AAS105) — AKTU B.Tech 1st Year Syllabus 2026-27
- Introduction to AI & Prompt Engineering (AAI101) — AKTU B.Tech 1st Year Syllabus 2026-27
- Fundamentals of Mechanical Engineering (AME101A) — AKTU B.Tech 1st Year Syllabus 2026-27
- Environment & Sustainability (AAC201) — AKTU B.Tech 1st Year Syllabus 2026-27
Notes, Question Bank & Practice Sets — Fundamentals of Electronics Engineering
The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.
Unit-wise short revision notes prepared from the official AKTU B.Tech 1st Year CSE Stream Syllabus 2026-27 (Course Structure V16) of this subject.
Buy / Download — My Downloads60 original practice questions (40-question bank + 2 full model papers) with model-answer outlines. This is a KAMALDNP practice paper — NOT an AKTU examination paper, and no question in it is promised to appear in your exam.
Buy / Download — My Downloads1 full practice paper (70 marks, 3 hours) with model answer outlines — practice/guess set only (no verified previous-year AKTU papers exist for this subject under the new V16 scheme)
Buy / Download — My DownloadsAlready purchased? You will find the Download button on the same My Downloads page — you will not be charged again.
Sources and Honesty Note
Official syllabus PDF: Download the AKTU B.Tech 1st Year CSE stream syllabus (V16, 2026-27) — aktu-btech-1st-year-cse-stream.pdf (hosted on kamaldnp.com).
The code, credits, hours, marks, unit lists and weightages in this guide come from the official AKTU B.Tech First Year CSE Stream Syllabus 2026-27 (Course Structure V16, w.e.f. 2026-27), read in full. The exam window (24 November – 27 December 2026) comes from the AKTU academic calendar (Ref. AKTU/RO/2026/12402, 3 July 2026); the date-sheet and admit-card status were checked as of 18 November 2026. What this guide deliberately does not claim: no subject-wise exam date (date sheet not released), no fixed section-wise question pattern (the scheme publishes none), and no previous AKTU paper for AEC101A (none exists under the new V16 code). The KAMALDNP study material for this subject contains practice/guess sets only — original practice questions, not questions from any AKTU examination. Nothing in this guide is copied from the syllabus PDF beyond short factual labels (unit names, codes, marks).
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!