Rajasthan Diploma — What It Is
The Diploma in Engineering — called Polytechnic across Rajasthan — is a three-year technical course run by the Board of Technical Education Rajasthan (BTER), Jodhpur. There is no entrance exam: admission is on Class 10 merit through a single centralised process called DAP (Diploma Admission Process). About 137 polytechnics take part — 68 government, 1 central, 68 private and 4 public-private partnership (PPP) institutes. The course runs for 3 years, 6 semesters, after Class 10, and the first year is common across all branches.
This guide explains the board, how the course works, the first-year subjects with their exact marks (taken from the official BTER first-year syllabus), the exam pattern, the branches, and the 2026-27 examination dates — everything a first-year student (or a parent) needs in one place.
Board of Technical Education Rajasthan (BTER), Jodhpur • Semester Scheme 2020-21 (CBCS) • Session 2026–27 • 3-Year Diploma in Engineering • Admission on Class 10 Merit

BTER Rajasthan at a Glance
| Item | Detail |
|---|---|
| Board | Board of Technical Education Rajasthan (BTER), Jodhpur |
| Course | Diploma in Engineering (Polytechnic) — 3 years, 6 semesters, after Class 10 |
| Current framework | Semester Scheme 2020-21, Choice Based Credit System (CBCS); results on a CGPA scale |
| First year | Common across all branches; branch subjects from the 2nd year |
| Admission | DAP (Diploma Admission Process) — Class 10 merit, no entrance exam |
| Lateral entry | Direct 2nd-year admission for eligible Class 12 / ITI candidates, with bridge courses |
| Polytechnics | About 137 — 68 government, 1 central, 68 private, 4 PPP (DAP-2026 booklet) |
| Official board site | bteronline.com |
| Admission portal | daprajasthan.co.in |
| Semester exams 2026-27 | Begin 28 December 2026 (start date only — paper-wise timetable not found as of 19 Nov 2026) |
Two cautions about the official sites: the syllabus index page on bteronline.com returns a 404, but the syllabus files themselves open fine through their direct links — the first-year, CS 3rd-year and Mechanical 3rd-year syllabuses were all downloaded directly from bteronline.com for this guide. The Department of Technical Education site (techedu.rajasthan.gov.in) could not be reached from our workspace on 19 November 2026; that was a connection failure on our side, not proof the site is down. Always confirm notices on bteronline.com itself before acting on them.
How the Course Works
The diploma is a 3-year, 6-semester course after Class 10. The first year is common for every branch — English and communication skills, applied mathematics, applied physics, applied chemistry, computer and IT fundamentals, applied mechanics, engineering drawing and workshop practice — and branch subjects begin in the 2nd year. Students who have passed Class 12 or ITI can enter directly into the 2nd year (lateral entry); the board runs bridge courses for students coming from different academic backgrounds.
Examinations run on the Semester Scheme 2020-21 under CBCS, with theory and practical components plus internal class tests — two class tests per semester. Results are issued on a CGPA scale, and BTER converts CGPA to percentage as CGPA × 10 − 5 (per the DAP-2026 information booklet).
First-Year Subjects — the Common Year
The table below is the official teaching and examination scheme from the BTER first-year common syllabus (Annual Scheme 2018-19 & onwards) — the document the board itself publishes for the first year. Six subjects carry a 70-mark, 3-hour board theory paper; three are practical-only.
| Code | Subject | Hours / week | Board exam | Sessionals | Total |
|---|---|---|---|---|---|
| 101 | English & Communication Skills | 1L + 2P | Theory 70 (3 hrs) | CT 30, PR(S) 50 | 150 |
| 102 | Applied Physics | 3L + 2P | Theory 70 (3 hrs) | CT 30, PR(S) 50 | 150 |
| 103 | Applied Chemistry | 2L + 2P | Theory 70 (3 hrs) | CT 30, PR(S) 50 | 150 |
| 104 | Applied Mathematics | 3L + 1T | Theory 70 (3 hrs) | CT 30, TU 50 | 150 |
| 105 | Computer & Information Technology Fundamentals | 2L + 2P | Theory 70 (3 hrs) | CT 30, PR(S) 50 | 150 |
| 106 | Applied Mechanics | 2L + 1T + 1P | Theory 70 (3 hrs) | CT 30, TU 25, PR(S) 25 | 150 |
| 107 | Engineering Drawing | 4P | Practical 50 (3 hrs) | CT 30, PR(S) 70 | 150 |
| 108 | Workshop Practice | 3P | Practical 50 (3 hrs) | PR(S) 100 | 150 |
| 109 | Electrical & Electronics Workshop | 3P | Practical 50 (3 hrs) | PR(S) 100 | 150 |
| First-Year Grand Total (plus Student Centred Activities — 2 hrs/week, graded on attendance, no marks) | 1,350 | ||||
L = lecture, T = tutorial, P = practical. CT = class-test marks, TU = tutorial marks, PR(S) = practical and viva sessional marks. The scheme prints tutorial hours as 2/2 — two hours per fortnight, i.e. one hour a week.
What each theory subject covers (unit lists from the same official syllabus): English & Communication Skills (7 units) — Narration and Voice; Transformation, Determiners and Prepositions; Tenses and Jumbled Sentences; Modals and "The Three Questions" (Tolstoy); Composition — Unseen Passage; Job Application with CV, General Application, E-mail and Dialogue; Essay Writing. Applied Physics (12 units) — Units and Dimensions; Elasticity; Properties of Liquids; Gravitation and Satellites; SHM and Sound Waves; Transfer of Heat; Electrostatics; D.C. Circuits; A.C. Circuits; Basic Electronics; Modern Physics; Pollution and its Control. Applied Chemistry (14 units) — Atomic Structure; Periodic Table; Electro Chemistry; Kinetic Theory of Gases; Carbon Chemistry; Metals and Alloys; Pollution; Water; Fuels; Corrosion; Polymers; Cement and Glass; Lubricants; Miscellaneous Materials. Applied Mathematics (10 units) — Expansion and Complex Numbers; Trigonometry; Matrices and Determinants; 2D Coordinate Geometry; Conic; Function; Differential Calculus; Integral Calculus; Differential Equations; Vector Algebra. Computer & IT Fundamentals (7 units) — Introduction; Data Representation; Operating System; Introduction to Windows OS; Information Concepts and Processing; Computer and Communication; MS Word, Excel and PowerPoint. Applied Mechanics (12 units) — Fundamentals of Mechanics; Coplanar Forces; Moment; Application of Principles of Forces and Moments; Centre of Gravity; Friction; Simple Machines; Rectilinear Motion; Motion Under Gravity; Projectiles; Newton's Laws of Motion; Work, Power and Energy.
Exam Pattern
Every theory subject in the first year has a board theory paper of 70 marks in 3 hours, plus 30 marks of class-test sessionals. Mathematics adds 50 tutorial marks; the science and computer subjects add 50 practical-and-viva sessional marks; Mechanics splits its sessionals between tutorials (25) and practicals (25). The three workshop subjects are examined by a 50-mark board practical (3 hours) plus sessionals. Each semester has two class tests.
One honest gap: the official syllabus publishes the marks and the hours, but no section-wise question pattern — it does not say how many short questions or long questions a paper holds, or how the 70 marks split between them. Any website claiming a fixed BTER section pattern is guessing. The English syllabus does add three paper rules of its own: the essay question is compulsory, there is at least one question from each unit, and no theory question comes from the practical syllabus. The practical lesson is the same for every subject: prepare every unit, because no unit is officially skippable.
Branches — What Is on Offer
No branch-wise admission or applicant numbers were found in published sources for Rajasthan, so no branch ranking here pretends to be a demand statistic. Ordered by how widely each branch is available across the state's 137 polytechnics, and by its parallel demand in REAP (BTech) counselling — where Computer Science is the most competitive branch — the five main branches are:
- Computer Science & Engineering
- Mechanical Engineering
- Civil Engineering
- Electrical Engineering
- Electronics Engineering
Branch choice happens at DAP counselling (see the admission guide below): the merit list decides who gets which branch and college. The first year is the same whatever branch you choose, so the choice only starts to matter from the second year.
Admission — DAP in Brief
Admission to the diploma is through DAP (Diploma Admission Process), run centrally on Class 10 merit — there is no entrance exam. The 2026-27 cycle is complete: applications ran 17 May – 10 June 2026, allotments were made on 1 July and 18 July 2026, direct admission ran 6–14 August 2026, and institute-level Phase 2 ended 14 September 2026. DAP-2027 has not been announced as of 19 November 2026. The full process — who can apply, the timeline, how allotment works, and lateral entry — is in our separate guide: Rajasthan Diploma Admission 2026-27 — DAP Process.
Semester Exam Dates 2026-27
The academic calendar below comes from the BTER calendar as published by Government Polytechnic Jhunjhunu (3 October 2026). Only the examination start date is known: semester examinations begin on 28 December 2026. The detailed paper-wise timetable was not found as of 19 November 2026 — this guide will not invent paper-wise dates, and neither should any site you read. Re-confirm the start date on bteronline.com before making plans around it.
| Event | Date |
|---|---|
| Classes began | 10 August 2026 |
| Examination form filling | 28 September – 27 October 2026 |
| 1st class test | 28 October 2026 |
| 2nd class test | 25 November 2026 |
| Classes end | 28 November 2026 |
| Winter vacation | 30 November – 27 December 2026 |
| Semester examinations begin | 28 December 2026 |
| 2nd / 4th / 6th semester classes begin | 25 January 2027 |
With the 2nd class test on 25 November and classes ending on 28 November, the winter vacation (30 November – 27 December) is the last revision window before the exams begin.
After the Diploma — BTech via REAP
Rajasthan's BTech admission runs through REAP (Rajasthan Engineering Admission Process), conducted for Rajasthan Technical University (RTU), Kota, on JEE Main rank and/or Class 12 marks — there is no separate state engineering entrance exam. The portals are reap2026.in and reapraj.com. The leading government institutes are RTU Kota, MBM University Jodhpur, Government Engineering College Ajmer, Government Engineering College Bikaner and the College of Technology and Engineering (CTAE), Udaipur; IIT Jodhpur, MNIT Jaipur and IIIT Kota admit through JoSAA. Published reports conflict on the REAP 2026 application dates, so no REAP dates are listed in this guide.
How to Prepare in the First Year
- Six theory papers, 70 marks each. Mathematics, Physics, Chemistry and Mechanics are largely numerical — learn one worked example per formula, then solve fresh problems with the notes closed.
- English is a scoring subject — and the essay is compulsory. The syllabus guarantees at least one question from every unit, so do not skip units; practise the essay, the job application with CV, and the unseen passage every week.
- Do not ignore the class tests. They are worth 30 marks in every theory subject, and the two tests per semester are the only rehearsal of exam conditions before the board paper.
- Practicals carry real marks. Each workshop subject is 150 marks in total — a 50-mark board practical plus sessionals — and the science subjects add 50 practical-and-viva sessional marks each. Lab work is not a side activity.
- Use the winter vacation. Classes end 28 November and the exams begin 28 December — the vacation is the revision window. Finish the syllabus before it starts, and use it for full-paper practice.
Frequently Asked Questions
What is BTER?
The Board of Technical Education Rajasthan, Jodhpur. It runs the diploma curriculum, examinations and results for the state's polytechnics. Its official site is bteronline.com.
How long is the Rajasthan diploma?
Three years, six semesters, after Class 10. The first year is common across all branches; branch subjects begin in the second year. Class 12 / ITI holders can enter directly into the second year (lateral entry), with bridge courses.
Is there an entrance exam for the Rajasthan diploma?
No. Admission is on Class 10 merit through the centralised DAP (Diploma Admission Process). There is no entrance test to prepare for.
How many marks is the theory paper?
Each first-year theory subject has a board paper of 70 marks in 3 hours, plus 30 marks of class-test sessionals (and tutorial or practical sessionals depending on the subject), for 150 marks per subject.
When do the semester exams start?
Semester examinations begin on 28 December 2026, per the BTER academic calendar. Only the start date is known — the paper-wise timetable had not been found as of 19 November 2026.
How is CGPA converted to percentage?
As CGPA × 10 − 5, per the DAP-2026 information booklet.
Which is the most in-demand diploma branch in Rajasthan?
No branch-wise admission or applicant numbers are published, so there is no verified demand ranking. The five most widely available branches are Computer Science & Engineering, Mechanical, Civil, Electrical and Electronics; Computer Science is the most competitive branch in REAP (BTech) counselling.
Where can I check official BTER notices?
On the board's website, bteronline.com; the admission portal is daprajasthan.co.in. Always confirm dates and notices there before acting on them.
Sources and Honesty Note
The scheme table, marks and unit lists in this guide come from the official BTER first-year common syllabus (24 pages, Annual Scheme 2018-19 & onwards), downloaded directly from bteronline.com and read in full; the CS and Mechanical 3rd-year syllabuses were downloaded from the same board site. The scale of the system (~137 polytechnics), the CGPA formula and the lateral-entry and bridge-course facts come from the DAP-2026 information booklet as cited by admission portals. The academic calendar comes from the BTER calendar as published by Government Polytechnic Jhunjhunu on 3 October 2026. The REAP facts come from Shiksha and Collegedunia coverage. What this guide deliberately does not claim: no paper-wise exam timetable (not found), no cutoffs or closing ranks for diploma admission (not published), no branch-wise seat or demand figures (not found), and no DAP-2027 dates (not announced). Nothing in this guide is copied from the syllabus PDFs beyond short factual labels (unit names, codes, marks).
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!