Automobile Maintenance Servicing & Repair — What This Subject Is About
A car that will not start, a brake that pulls to one side, an air conditioner that blows warm air — every one of these is a maintenance problem before it is a repair bill. Automobile Maintenance Servicing & Repair is the subject that teaches you to find the fault and fix it: engine overhauling, lubrication, electrical repairs and air-conditioning servicing, the way a garage actually does them.
The subject covers five units in 42 periods: engine maintenance and repairing; engine repairing processes; the lubricating system and radiator; electrical system repair and maintenance; and the vehicle air conditioning system. It is a practicum subject — 3 lecture periods and 3 practical periods a week, with 40 internal practical marks and a 60-mark external theory paper in 3 hours — and every unit carries the same 12 marks in that theory paper, so no unit can be skipped. The practical list has 11 experiments, from fault-finding on a four-wheeler to testing and charging a battery.
Subject 5.5 (Practicum) • Total 100 Marks • 4 Credits • L 3 – P 3 • 5th Semester — Mechanical Engineering (Automobile) • Session 2026–27

What You Will Study
Unit 1 — Engine Maintenance & Repairing (6 Periods, 12 Marks)
Maintenance, Maintenance schedule, Routine Maintenance schedule for petrol engine and diesel engine, lubricating chart, cleaning and adjustment, preventive maintenance, trouble shooting for faults in engines. Overhauling of engines, Adjusting the engine timing, Maintenance and adjustment of carburetor, fuel injection pump, Multi Point Fuel Injection (MPFI) System and Anti-lock braking system. Checking the valve clearance and adjustment, valve grinding and lapping, engine tuning, detection and rectification of faults using compression gauge and vacuum gauge.
Keeping an engine healthy: maintenance schedules, preventive care, overhauling, timing, and finding faults with compression and vacuum gauges.
Unit 2 — Engine Repairing Processes (6 Periods, 12 Marks)
Cylinder re-boring and re-sleeving, Removal of liners and fitting, inspection; Repair and fitting of valve and valve guides, checking the connecting rod for bending and connecting rod alignment, inspection of crank shaft for ovality and regrinding, Phasing and calibration of fuel injection pump, nozzle testing, cleaning and grinding.
The workshop repair jobs: re-boring cylinders, fitting liners and valves, straightening connecting rods, regrinding crankshafts, and phasing and calibrating the fuel injection pump.
Unit 3 — Repair and Maintenance of Lubricating System and Radiator (10 Periods, 12 Marks)
Principle of lubrication on multi cylinder engine, Types of Lubrication system: Splash, Pressure, Combined, Types of Lubrication pumps and pump drive, Maintenance of Lubricating system, Flushing the lubricating system, Change of used lubricating oils, cleaning and fitting of oil filter, lubrication of water pump, grades of oils, multi grade oil, additives for improving the quality of oil, Radiator repair and maintenance.
How oil reaches every moving part, which oil to use and when to change it, and how the radiator is kept working.
Unit 4 — Electrical System Repair and Maintenance (10 Periods, 12 Marks)
Problems related to Starter, Starter troubleshooting and suggesting remedies, removal of starter from engine, repairing the starter, bushes and bushes replacement, checking of armature for short circuit, cleaning of commutators, checking, repairing of starter drive, reassembly and testing of starter, dynamo, lubricating the dynamo, changing the bushes, checking and tuning the electrical horn.
Finding and fixing starter faults, checking the armature and commutator, servicing the dynamo, and tuning the horn.
Unit 5 — Repair and Maintenance of Vehicle Air Conditioning System (10 Periods, 12 Marks)
Testing and Charging of Air Conditioner, care and maintenance of electrical components, noise level system, fresh air allowance, primary and secondary circuit, heat exchanger, cooling and dehumidifying coil. Care and servicing: Air control unit, temperature control unit, magnet clutch, condenser, fan assembly, Evaporator, relays, expansion valve, filters and three way solenoid valve. Checking of harness of air conditioning.
Testing and charging the air conditioner, and servicing every part of it: clutch, condenser, fan, evaporator, valves, filters and wiring.
Complete Syllabus
The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.
Examination Scheme
| Code | Paper | Type | L – P | Credits | Internal | External | Total |
|---|---|---|---|---|---|---|---|
| 5.5 | Automobile Maintenance Servicing & Repair | Practicum | 3 – 3 | 4 | Practical 40 | Theory 60 (3 hrs) | 100 |
| Automobile Maintenance Servicing & Repair Total | 4 | 40 | 60 | 100 | |||
Units at a Glance
| Unit | Topic | Periods | Marks |
|---|---|---|---|
| 1 | Engine Maintenance & Repairing | 6 | 12 |
| 2 | Engine Repairing Processes | 6 | 12 |
| 3 | Repair and Maintenance of Lubricating System and Radiator | 10 | 12 |
| 4 | Electrical System Repair and Maintenance | 10 | 12 |
| 5 | Repair and Maintenance of Vehicle Air Conditioning System | 10 | 12 |
| Total | 42 | 60 | |
Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.
Reference Books
As listed in the syllabus:
- A Textbook of Automobile Engineering by R. K. Rajput; Laxmi Publications Pvt Ltd.
- Vehicle Maintenance and Garage Practice by J. A. Doshi, D. U. Panchal and J. P. Maniar; PHI Learning.
- E-books/e-tools/relevant software to be used as recommended by AICTE.
How to Prepare for Automobile Maintenance Servicing & Repair
Learn every unit as fault → cause → remedy. This paper is a troubleshooting paper: a symptom is given, and you must name the likely cause and the remedy. For every system — engine, lubrication, starter, air conditioner — keep a small table of faults, causes and remedies, and the questions answer themselves.
Know the maintenance schedules by heart. Unit 1 asks what is checked daily, weekly and at each service interval for petrol and diesel engines. Learn the routine maintenance schedule as a list, and the “what do you check at 5,000 km” questions become free marks.
Master the measuring instruments. Compression gauge, vacuum gauge, hydrometer, feeler gauge — the paper asks what each one measures and what its reading means. A low compression reading, a fluctuating vacuum reading, a low specific gravity: learn what each one tells you about the engine.
Draw the circuits and systems. The lubrication system (splash, pressure, combined), the starter circuit, the air-conditioning cycle — Units 3, 4 and 5 are diagram units. A labelled diagram with a two-line explanation of each part is the fastest full-mark answer in this paper.
Finish with timed practice. Work through model papers in one sitting of 3 hours, without notes — exactly like the real examination. Then compare your answers with the model answer outline and note the points you missed. Questions that repeat across sets are the subject's most important questions.
Exam Tips
- Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered — pick the two parts you know best in every question, and do not leave any question blank.
- Answer troubleshooting questions in three steps. Symptom, probable cause, remedy — in that order. An answer that jumps straight to the remedy without naming the cause loses marks.
- Name the tool or instrument first. In a question about “how do you check engine condition”, write “compression gauge” or “vacuum gauge” in the first line — examiners give marks for the correct instrument even if the procedure is short.
- Draw neat, labelled diagrams wherever they are asked. Label every part of a lubrication system, a starter motor and an air-conditioning circuit; an unlabelled sketch earns little.
- Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.
- Write in your own words, in the same order as the questions. Short, clear points with the key terms score better than long copied paragraphs.
Frequently Asked Questions
How many marks is Automobile Maintenance Servicing & Repair worth in the 5th semester?
100 marks in total and 4 credits: internal assessment 40 marks (practical) and external theory paper 60 marks in 3 hours.
Which units carry the most marks in Automobile Maintenance Servicing & Repair?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Units 3, 4 and 5 get more teaching time (10 periods each) than Units 1 and 2 (6 periods each). The complete unit-wise table is in the Complete Syllabus section above.
Is Automobile Maintenance Servicing & Repair a theory subject or a practical subject?
It is a practicum subject (L–P 3 – 3, 11 practicals listed in the syllabus). Its internal marks are practical marks (40); its external paper is a 60-mark theory paper in 3 hours.
What are the most scoring topics in Automobile Maintenance Servicing & Repair?
The troubleshooting tables (fault–cause–remedy) from Units 1 and 4 and the maintenance schedules are the most scoring, because a well-organised table earns full marks step by step. The labelled diagrams (lubrication system, air-conditioning cycle) are the next best scorers. But since every unit carries 12 marks, no unit should be left out.
Which books should I refer to for Automobile Maintenance Servicing & Repair?
The syllabus lists 2 books — A Textbook of Automobile Engineering by R. K. Rajput and Vehicle Maintenance and Garage Practice by J. A. Doshi, D. U. Panchal and J. P. Maniar — plus e-books and e-tools as recommended by AICTE. The full list is in the Complete Syllabus section above.
Which sub-branch takes this subject?
Mechanical Engineering (Automobile) takes Automobile Maintenance Servicing & Repair as its 5.5 subject. The Production sub-branch takes Advanced Manufacturing Processes as its 5.5 subject instead.
How can I download the Automobile Maintenance Servicing & Repair syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.
Related Syllabus Posts
- Theory of Machines & Mechanisms — BTEUP Mechanical 5th Semester Syllabus 2026-27
- Design of Machine Elements — BTEUP Mechanical 5th Semester Syllabus 2026-27
- Advanced Manufacturing Processes — BTEUP Mechanical (Production) 5th Semester Syllabus 2026-27
- Thermal Engineering-I — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- Fluid Mechanics & Hydraulic Machinery — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- Fluid Mechanics & Hydraulic Machinery Lab — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- Measurements & Metrology — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- All BTEUP Syllabus Posts — kamaldnp.com Blog
- KAMALDNP Books — Short Notes, Question Banks & Practice Sets
Notes, Question Bank & Practice Sets — Automobile Maintenance Servicing & Repair
The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.
Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.
Buy / Download — My DownloadsOne original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.
Buy / Download — My Downloads10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)
Buy / Download — My DownloadsAlready purchased? You will find the Download button on the same My Downloads page — you will not be charged again.
Download the Automobile Maintenance Servicing & Repair Syllabus PDF
Download the complete Automobile Maintenance Servicing & Repair syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.
Download the Automobile Maintenance Servicing & Repair Syllabus PDF
Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Automobile), effective session 2026-27, approved by the Board of Technical Education, U.P. Lucknow in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!