SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Theory of Machines & Mechanisms — BTEUP Mechanical 5th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 19, 2026
11 Min Read
Theory of Machines & Mechanisms — BTEUP Mechanical 5th Semester Syllabus 2026-27

Theory of Machines & Mechanisms — What This Subject Is About

Every machine you have ever used — a bicycle, a lathe, a car engine, a lift — is a chain of moving parts that must move in exactly the right way at exactly the right time. Theory of Machines & Mechanisms is the subject that explains how that motion is designed: how a cam lifts a valve, how a belt carries power from a motor to a shaft, how a governor holds an engine's speed steady, and why a spinning wheel must be balanced before it can run safely.

The subject covers five units in 56 periods: mechanisms and cams; power transmission through belts, chains, gears and ropes; flywheels and governors; brakes, dynamometers, clutches and bearings; and balancing and vibrations. The paper is a pure theory paper — 60 marks external in 3 hours, with 40 internal marks — and every unit carries the same 12 marks, so no unit can be skipped. It is also one of the most numerical papers of the semester: belt drives, flywheels and governors all come with calculations that reward a student who practises them.

Subject 5.2 (Theory) • Total 100 Marks • 4 Credits • L 4 – P 0 • 5th Semester — Mechanical Engineering • Session 2026–27

Note: The 5th-semester subjects 5.2 and 5.3 are the same for Mechanical Engineering (Production) and Mechanical Engineering (Automobile) — so this syllabus applies to both sub-branches.
Theory of Machines & Mechanisms syllabus — cams, belt drives, gears and governors, BTEUP Mechanical 5th semester 2026-27
Motion, designed — cams, belts, gears, governors and flywheels are the moving parts every machine is built from.

What You Will Study

Unit 1 — Introduction to Mechanisms and Machines; Cams and Followers (10 Periods, 12 Marks)

Introduction of Mechanism and Machine, Basic elements: Link, Pairs, Chains, Inversions, different types of mechanisms, Displacement, velocity and acceleration of plane mechanisms. Cams and Followers: Definition and application of Cams and Followers; Classification of Cams and Followers; Different follower motions and their displacement diagrams like uniform velocity, SHM, uniform acceleration and Retardation; Drawing of profile of radial cam with knife-edge and roller follower.

What mechanisms and machines are, how links, pairs and chains work, and how cams give a follower its chosen motion, with the displacement diagrams and cam profiles drawn from them.

Unit 2 — Power Transmission (12 Periods, 12 Marks)

Basics of Power Transmission. Belt Drives: Flat belt, V-belt and its applications; Material for flat and V-belt; Angle of lap, Belt length, Slip and Creep; Determination of Velocity Ratio, Ratio of tight side and slack side tension; Centrifugal tension and Initial tension; Condition for maximum power transmission (Simple numerical). Chain Drives: Advantages and Disadvantages; Selection of Chain and Sprocket wheels; Methods of lubrication. Gear Drives: Gear terminology; Types of gears and gear trains, their selection for different applications; Train value and Velocity ratio for simple and compound gear train, law of gearing; Rope Drives: Types, applications, advantages and limitations of Steel ropes.

How power moves from one shaft to another: belts (length, slip, creep, tension ratio, maximum power), chains, gears and gear trains, and steel rope drives.

Unit 3 — Flywheel and Governors (10 Periods, 12 Marks)

Concept, function and application of flywheel with the help of turning moment diagram for single cylinder 4-Stroke I.C. Engine; Coefficient of fluctuation of energy, Coefficient of fluctuation of speed and its significance. Governor Types and explanation with neat sketches (Centrifugal: Watt and Porter); Concept, function and applications and Terminology of Governors; Comparison between Flywheel and Governor.

The flywheel smooths speed within one cycle; the governor holds the mean speed steady when the load changes. The turning moment diagram shows where the flywheel stores and releases energy.

Unit 4 — Brakes, Dynamometers, Clutches & Bearings (12 Periods, 12 Marks)

Function of brakes and dynamometers; Types of brakes and Dynamometers; Comparison between brakes and dynamometers; Construction and working of (i) shoe brake, (ii) Band Brake, (iii) Internal expanding shoe brake, (iv) Disc Brake; Concept of Self Locking and Self energizing brakes. Clutches: Uniform pressure and Uniform Wear theories; Function of Clutch and its application; Construction and working of Single plate, Multiplate, Centrifugal and Cone clutch. Bearings: (i) Simple Pivot, (ii) Collar Bearing, (iii) Conical pivot.

How machines stop (brakes), how their power is measured (dynamometers), how the engine is connected and disconnected (clutches), and how thrust loads are carried (pivot and collar bearings).

Unit 5 — Balancing & Vibrations (12 Periods, 12 Marks)

Concept of balancing; Balancing of single rotating mass; Graphical method for balancing of several masses revolving in same plane. Concept and terminology used in vibrations, Causes of vibrations in machines; their harmful effects and remedies.

Why rotating parts must be balanced, how to balance one mass and several masses in a plane, and what causes vibration in machines, what harm it does and how it is cured.

Complete Syllabus

The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
5.2Theory of Machines & MechanismsTheory4 – 04Theory 40Theory 60 (3 hrs)100
Theory of Machines & Mechanisms Total44060100

Units at a Glance

UnitTopicPeriodsMarks
1Introduction to Mechanisms and Machines; Cams and Followers1012
2Power Transmission1212
3Flywheel and Governors1012
4Brakes, Dynamometers, Clutches & Bearings1212
5Balancing & Vibrations1212
Total5660

Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.

Reference Books

As listed in the syllabus:

  • Theory of machines – S. S. Rattan, Tata McGraw-Hill publications.
  • Theory of machines – R. K. Bansal, Laxmi publications.
  • Theory of machines – R. S. Khurmi and J. K. Gupta, S. Chand publications.
  • Dynamics of Machines – J. B. K. Das, Sapna Publications.

How to Prepare for Theory of Machines & Mechanisms

Learn the belt formulas until they are automatic. Unit 2 is the numerical heart of the paper: belt length for open and crossed drives, velocity ratio with slip, the tension ratio T1/T2 = e^(μθ), power transmitted, and centrifugal tension. Write each formula with its units, and practise one numerical of each type before moving on.

Draw the mechanisms, don't just read about them. Four-bar chains, slider-crank, cam profiles, gear trains — every one of them is asked with a sketch. A clean, labelled diagram of a cam with its follower, or of a gear train with the teeth marked, is worth more than a page of description.

Master the flywheel and governor pair. Unit 3 gives two of the paper's most reliable numericals: the flywheel's energy fluctuation (I = ΔE / (ω²·Cs)) and the governor's height (h = 895/N² metres for a Watt governor). Both are short calculations — learn the method once and they stay scoring.

Learn the differences as pairs. Open vs crossed belt, flat vs V-belt, Watt vs Porter vs Hartnell governor, plate vs cone clutch, static vs dynamic balancing, free vs forced vs damped vibration — this paper loves “differentiate” and “compare” questions, and a two-column comparison is the fastest way to answer them.

Finish with timed practice. Work through model papers in one sitting of 3 hours, without notes — exactly like the real examination. Then compare your answers with the model answer outline and note the points you missed. Questions that repeat across sets are the subject's most important questions.

Exam Tips

  • Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered — pick the two parts you know best in every question, and do not leave any question blank.
  • Convert units before substituting. The commonest numerical mistake in this paper is mixing rpm with rad/s, or millimetres with metres, in belt and flywheel calculations. Convert first, then calculate.
  • Show every step of a numerical. In a belt or flywheel numerical, write the formula, the substitution with units, and then the answer — examiners give marks for the correct method even if the last step slips.
  • Draw neat, labelled diagrams wherever they are asked. Label the driver and driven pulleys, the tight and slack sides, every part of a governor and every force in a balancing diagram; an unlabelled sketch earns little.
  • Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.
  • Write in your own words, in the same order as the questions. Short, clear points with the key terms score better than long copied paragraphs.

Frequently Asked Questions

How many marks is Theory of Machines & Mechanisms worth in the 5th semester?
100 marks in total and 4 credits: internal assessment 40 marks (theory) and external theory paper 60 marks in 3 hours.

Which units carry the most marks in Theory of Machines & Mechanisms?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Units 2, 4 and 5 get slightly more teaching time (12 periods each) than Units 1 and 3 (10 periods each). The complete unit-wise table is in the Complete Syllabus section above.

Is Theory of Machines & Mechanisms a theory subject or a practical subject?
It is a pure theory subject (L–P 4 – 0, no practical hours).

What are the most scoring topics in Theory of Machines & Mechanisms?
The numericals — belt-drive problems from Unit 2 and flywheel and governor problems from Unit 3 — are the most scoring, because a correct method earns full marks step by step. The labelled sketches (cam profiles, gear trains, governor diagrams) are the next best scorers. But since every unit carries 12 marks, no unit should be left out.

Which books should I refer to for Theory of Machines & Mechanisms?
The syllabus lists 4 books, including Theory of Machines by R. S. Khurmi and J. K. Gupta and Theory of Machines by S. S. Rattan, among others. The full list is in the Complete Syllabus section above.

Does this subject apply to both Mechanical sub-branches?
Yes. Subjects 5.2 and 5.3 are the same for Mechanical Engineering (Production) and Mechanical Engineering (Automobile). Only subject 5.5 differs: Production takes Advanced Manufacturing Processes, Automobile takes Automobile Maintenance Servicing & Repair.

How can I download the Theory of Machines & Mechanisms syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Theory of Machines & Mechanisms

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Theory of Machines & Mechanisms Syllabus PDF

Download the complete Theory of Machines & Mechanisms syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Theory of Machines & Mechanisms Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Production), effective session 2026-27, approved by the Board of Technical Education, U.P. Lucknow in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →