SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Electric Machine-2 — BTEUP Electrical 4th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
October 27, 2026
6 Min Read
Electric Machine-2 — BTEUP Electrical 4th Semester Syllabus 2026-27
कृपया ध्यान दें — कवर वर्ष बनाम स्वीकृति: इस पाठ्यक्रम के लिए BTEUP की अपनी फ़ाइल के कवर पर "YEAR 2025-2026" छपा है, जबकि उसके हर पृष्ठ पर स्वीकृति पंक्ति "UPDATED AND APPROVED BY BOARD OF TECHNICAL EDUCATION U.P. LUCKNOW IN C.D.C MEETING HELD ON 16.07.2026" है। यह BTEUP के 2026-27 फ़ोल्डर (folder2627) में रखी है, इसलिए उस स्वीकृति के आधार पर इसे यहाँ 2026-27 सिलेबस माना गया है। इसमें दी गई योजना 2025-26 की योजना से विषय-दर-विषय और अंक-दर-अंक समान है।

Electric Machine-2 — यह विषय किस बारे में है

अगर Machine-1 DC machines और transformers के बारे में था, तो Machine-2 उन AC machines के बारे में है जो आधुनिक दुनिया चलाती हैं: three-phase और single-phase induction motors, alternators, synchronous motors और special electric machines। यह आपको विभिन्न applications में इस्तेमाल होने वाली induction, synchronous और special electric machines को maintain करना सिखाता है। यह theory paper 4.2 है; इसका practical कार्य अलग lab विषय 4.6 (Electric Machine- II (Lab)) है।

पाँचों units हैं: three-phase induction motors, single-phase induction motors, three-phase alternators, synchronous motors और special electric machines। Induction motors और alternators का weightage सबसे ज़्यादा है — प्रत्येक 25% (10 पीरियड प्रत्येक)। यह theory विषय है (L 3 – P 0), कुल 100 अंक और 3 क्रेडिट, और 10 संदर्भ पुस्तकें हैं।

Subject 4.2 (Theory) • Total 100 Marks • 3 Credits • L 3 – P 0 • 4th सेमेस्टर — Electrical Engineering • सत्र 2026–27

About this document: This is the theory paper 4.2. Its practical work is the separate lab subject 4.6 (Electric Machine- II (Practical)).
Cross-section diagram of a three-phase induction motor showing the stator, rotor and rotating magnetic field
इंडक्शन मोटर में स्टेटर का घूमता चुंबकीय क्षेत्र रोटर को अपने साथ घुमाता है — रोटर को सीधा बिजली कनेक्शन नहीं चाहिए।

आप क्या पढ़ेंगे

Unit – I: Three Phase Induction Motor (10 Periods, 25%)

Working principle: production of rotating magnetic field, Synchronous speed, rotor speed and slip; Locking of rotor and stator fields; Constructional details of 3 phase induction motors: Squirrel cage induction motor and Slip ring induction motor; Rotor quantities: frequency, induced emf, power factor at starting and running condition; Characteristics of torque versus slip (speed), Torques: starting, full load and maximum with relations among them; Relationship between rotor copper losses, slip and rotor input power (Power flow diagram); Starters: need and types; stator resistance, auto transformer, star delta, rotor resistance and soft starters; Speed control methods: stator voltage, pole changing, rotor resistance and VVVF; Motor selection for different applications as per the load torque-speed requirements; Cogging and Crawling.

Unit – II: Single phase induction motors (08 Periods, 18%)

Double field revolving theory, principle of making these motors self-start; Construction, working and Torque-speed characteristics: Resistance start induction run, capacitor start induction run, capacitor start capacitor run, shaded pole, repulsion type, series motor, universal motor, hysteresis motor; Motor selection for different applications as per the load torque-speed requirements.

Unit – III: Three phase Alternators (10 Periods, 25%)

Principle of working, moving and stationary armatures; Constructional details: parts and their functions, Windings: Single and Double layer; Equivalent circuit diagram, E.M.F. equation of an Alternator with numerical by considering short pitch factor and distribution factor; Necessary conditions of parallel operation of alternators; Armature reaction at various power factors and synchronous impedance; Voltage regulation: direct loading and synchronous impedance methods; Operation of synchronous machine as a motor.

Unit – IV: Synchronous Motors (08 Periods, 18%)

Principle of working, Torques: starting torque, running torque, pull in torque, pull out torque; Synchronous motor on load with constant excitation (numerical), effect of excitation at constant load (numerical); Concept of synchronous condenser; V-Curves and Inverted V-Curves; Hunting and Phase swinging; Methods of Starting of Synchronous Motor; Losses in synchronous motors and efficiency (no numerical); Applications areas.

Unit – V: Special Electric Machines (06 Periods, 14%)

Construction, working and applications: Linear Induction Motor, Synchronous Reluctance Motor, Switched Reluctance Motor, Permanent Magnet Synchronous Motors, stepper motors, AC and DC servomotors, Submersible motor.

पूरा सिलेबस

आधिकारिक सिलेबस से पूरी परीक्षा योजना, प्रैक्टिकल्स की पूरी सूची और संदर्भ पुस्तकें। यूनिट-वार विषय ऊपर "आप क्या पढ़ेंगे" वाले भाग में हैं।

परीक्षा योजना

कोडपेपरप्रकारL – Pक्रेडिटआंतरिकबाह्यकुल
4.2Electric Machine- IITheory3 – 034060 (3 hrs)100
Electric Machine- II (Theory) Total34060100

यूनिट्स एक नज़र में

यूनिटविषयपीरियडअंकों का हिस्सा
IThree Phase Induction Motor1025%
IISingle phase induction motors0818%
IIIThree phase Alternators1025%
IVSynchronous Motors0818%
VSpecial Electric Machines0614%

संदर्भ पुस्तकें

सिलेबस में दी गई सूची के अनुसार:

  • P.S. Bimbhra, Electric Machines, Khanna Book Publishing Co., New Delhi (ISBN: 978-93-86173-294)
  • Mittle, V.N. and Mittle, Arvind., Basic Electrical Engineering, McGraw Hill Education New Delhi, ISBN: 9780070593572
  • Kothari, D. P. and Nagrath, I. J., Electrical Machines, McGraw Hill Education. New Delhi, ISBN: 9780070699670
  • Bhattacharya, S. K., Electrical Machines, McGraw Hill Education, New Delhi, ISBN: 9789332902855
  • Dr. T.D. Bisht, Pooja Yadav, Electrical Machine-II, Asian Publishers, Muzaffarnagar ISBN: 978-93-91541-98-9
  • Theraja, B.L., Electrical Technology Vol-II (AC and DC machines), S.Chand and Co. Ltd., New Delhi, ISBN: 9788121924375
  • Sen, S. K., Special Purpose Electrical Machines, Khanna Publishers, New Delhi, ISBN: 9788174091529
  • Janardanan E. G, Special Electrical Machines, Prentice Hall India, New Delhi ISBN: 9788120348806
  • Hughes E., Electrical Technology, ELBS
  • Cotton H., Electrical Technology, ELBS

अक्सर पूछे जाने वाले प्रश्न

चौथा सेमेस्टर में Electric Machine-2 कितने अंकों का है?
कुल 100 अंक, 3 क्रेडिट। Theory विषय (L 3 – 0): आंतरिक 40, बाह्य 60 (3 hrs)।

Electric Machine-2 में सबसे ज़्यादा भार वाली unit कौन सी है?
Three Phase Induction Motor, 25% (10 पीरियड)।

क्या Electric Machine-2 में practical कार्य है?
नहीं — आधिकारिक सिलेबस में इस विषय के लिए कोई practicals नहीं दिए गए हैं।

Electric Machine-2 के लिए कौन सी किताबें पढ़नी चाहिए?
आधिकारिक सिलेबस में 10 संदर्भ पुस्तकें सूचीबद्ध हैं — पूरी सूची ऊपर पूरा सिलेबस वाले भाग में है।

Electric Machine-2 सिलेबस PDF कैसे डाउनलोड करूँ?
PDF मुफ़्त डाउनलोड के लिए है — नीचे Download वाले भाग में दिए गए लिंक का उपयोग करें। यह KAMALDNP द्वारा आधिकारिक BTEUP सिलेबस से तैयार किया गया है।

क्या इस विषय की अलग lab है?
हाँ — practical कार्य अलग lab विषय 4.6, Electric Machine- II (Lab) है: 15 practicals, जिनमें से कोई 10 करने होते हैं। यह पोस्ट केवल theory paper 4.2 की है।

संबंधित सिलेबस पोस्ट

Electric Machine-2 सिलेबस PDF डाउनलोड करें

नीचे Electric Machine-2 का पूरा सिलेबस PDF डाउनलोड करें — KAMALDNP द्वारा तैयार, जिसमें topics की पूरी सूची और संदर्भ पुस्तकें हैं।

Electric Machine-2 सिलेबस PDF डाउनलोड करें

स्रोत: BTEUP द्वितीय वर्ष Electrical Engineering curriculum (folder2627)। फ़ाइल के कवर पर "YEAR 2025-2026" छपा है, लेकिन स्वीकृति पंक्ति "UPDATED AND APPROVED BY BOARD OF TECHNICAL EDUCATION U.P. LUCKNOW IN C.D.C MEETING HELD ON 16.07.2026" हर पृष्ठ पर (95 बार) है, और उस स्वीकृति के आधार पर इसे यहाँ 2026-27 सिलेबस माना गया है। विषय-सूचियाँ आधिकारिक सिलेबस के अनुसार हैं; छोटे स्पष्टीकरण लेखक के अपने सरल हिंदी सारांश हैं, सिलेबस का मूल पाठ नहीं। अपने पॉलिटेक्निक में किसी भी स्थानीय बदलाव की पुष्टि अवश्य करें।

Download Attached Resources

The author has provided premium resources (PDF, Source Code, Notes) for you to access.

Click Here to Download File

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →