Electronic System Design and Embedded System — यह विषय किस बारे में है
Electronic System Design and Embedded System में PCB design से embedded system तक, पूरा electronic product बनाने की प्रक्रिया सीखेंगे।
To understand the fundamentals of electronic system design and apply them to develop complete electronic systems — selecting sensors and actuators for interfacing with the real world — and to learn modern embedded systems (operating system concepts, real-time design) starting with the 8051 microcontroller and the Arduino platform for real-time embedded applications.
Subject 5.3 (Practicum) • Total 100 Marks • 3 Credits • L 2 – P 2 • पाँचवाँ सेमेस्टर — Electronics Engineering • सत्र 2026–27
आप क्या पढ़ेंगे
यूनिट 1 — Basics of Electronic Systems Design (5 पीरियड, 17%)
Definition, Purpose and Scope; System Architecture for Electronic Product Designs; Breakdown of an Electronic System Design; Requirements; Electromagnetic Interference in Electronic Systems and Its Impact; Concept of Grounding and Its Significance, PCB designing principals, Etching process, Types of etching.
How a complete electronic product is designed: system architecture, requirements, electromagnetic interference, grounding, and PCB design and etching.
यूनिट 2 — Sensors and Actuators (6 पीरियड, 22%)
Sensor: Definition: Sensor Characteristics - Sensitivity, Linearity, Range, Resolution, Accuracy, Repeatability, and Hysteresis. Types of Sensors: Temperature Sensor, Ultrasonic Sensor, Gas Sensor, Level Sensor, Ph Sensor, Flow Sensor, Humidity Sensor, Proximity Sensor, Pressure Sensor, etc. Actuator: Definition: Actuator Principles and Classification, Energy Source-Based Actuators (i.e., Pneumatic Actuator, Hydraulic Actuator, Electric Actuator, Thermal Actuator, Magnetic Actuator, and Piezoelectric Actuator). Classification of Actuators by Motion: Linear, Rotary, and Semi-Rotary.
Sensors that measure the world and actuators that act on it: their types, characteristics and classifications.
यूनिट 3 — Embedded System (6 पीरियड, 22%)
Embedded system architecture Types of Architecture of Embedded Processors: Von Neumann, Harvard, Super Harvard, RISC, CISC, DSP, Multi core processor, factors affecting embedded systems, Types of embedded O.S: Non real time O.S, Real time O.S, Mobile O.S
Embedded systems: processor architectures (Von Neumann, Harvard, RISC, CISC, DSP, multicore) and the operating systems that run on them — real-time and otherwise.
यूनिट 4 — 8051 Microcontroller (6 पीरियड, 22%)
Introduction to 8051 Pin Diagram and Description, Memory Organization, Special Function Registers, Addressing Modes, Interrupts, Timers, Serial Communication. Difference between the C language and Embedded C language,
The 8051 microcontroller: its pins, memory, special-function registers, addressing modes, interrupts, timers and serial communication.
यूनिट 5 — Communication with Arduino Uno (5 पीरियड, 17%)
Arduino Uno specifications including power ratings, digital and analog peripherals. Arduino Uno Ports, Pins, Digital and Analog Peripherals, Familiarizing with the Arduino IDE, Arduino I/O functions, Arduino Interrupts, Serial Peripheral Interface and Communication and their programming.
The Arduino Uno: its specifications, pins and peripherals, the Arduino IDE, and programming its I/O, interrupts and serial communication.
प्रैक्टिकल कार्य
- Familiarization with different types of PCB’S Materials and their key specifications.(Bakellite,FR4 etc).
- Schematic creation and PCB Layout for simple circuits using open source software.
- Creating a PCB that is fully prepared for component installation with PCB grounding techniques.
- Identifying various types of sensors and analyzing their specifications through datasheets.
- Identifying various types of actuators and analyzing their specifications through datasheets.
- Familiarization with different types of microcontrollers and their specifications and IC packages (ESP8266/32, Arduino Classic, MKR, Nano and Mega family, Raspberry pi).
और भी बहुत कुछ — 14 practicals की पूरी सूची PDF के अंदर है।
पूरा सिलेबस
आधिकारिक सिलेबस से पूरी परीक्षा योजना, practicals की पूरी सूची और संदर्भ पुस्तकें। यूनिट के अनुसार topics ऊपर "आप क्या पढ़ेंगे" वाले हिस्से में दिए गए हैं।
परीक्षा योजना
| Code | Paper | Type | L – P | Credits | Internal | External | Total |
|---|---|---|---|---|---|---|---|
| 5.3 | Electronic System Design and Embedded System | Practicum | 2 – 2 | 3 | Theory 40 | Theory 60 (3 hrs) | 100 |
| Electronic System Design and Embedded System Total | 3 | 40 | 60 | 100 | |||
एक नज़र में यूनिट्स
| यूनिट | विषय | पीरियड | अंकों का हिस्सा |
|---|---|---|---|
| 1 | Basics of Electronic Systems Design | 5 | 17% |
| 2 | Sensors and Actuators | 6 | 22% |
| 3 | Embedded System | 6 | 22% |
| 4 | 8051 Microcontroller | 6 | 22% |
| 5 | Communication with Arduino Uno | 5 | 17% |
प्रैक्टिकल्स की पूरी सूची
यह आधिकारिक सिलेबस से practicals की पूरी सूची है।
- Familiarization with different types of PCB’S Materials and their key specifications.(Bakellite,FR4 etc).
- Schematic creation and PCB Layout for simple circuits using open source software.
- Creating a PCB that is fully prepared for component installation with PCB grounding techniques.
- Identifying various types of sensors and analyzing their specifications through datasheets.
- Identifying various types of actuators and analyzing their specifications through datasheets.
- Familiarization with different types of microcontrollers and their specifications and IC packages (ESP8266/32, Arduino Classic, MKR, Nano and Mega family, Raspberry pi).
- Template for embedded C program for 8051 (using reg.51).
- Write a program to load a number into Accumulator.
- Write a program to load three numbers into Accumulator and send them to port 1.
- Write a program to explain different logical operations.
- Write a program for LED blinking with 1s delay.
- Write a program for handling two LEDs blinking alternatively with a delay of 2s.
- Write a program to read digital states of a push button and print in IDE serial monitor.
- Write a program to send a message using serial communication.
संदर्भ पुस्तकें
सिलेबस में दिए अनुसार:
- John F. Wakerly,Digital Design: Principles and Practices, 5th edition, Pearson Publications, 2018
- Charles Kitchin and Lew Counts, A Designer’s Guide to Instrumentation Amplifiers,3rd edition, Analog Devices, 2006
- Eamon Nash, Errors and Error Budget Analysis in Instrumentation Amplifier Applications, 3rd edition, Analog Devices, 2006
- Lyla B. Das, Embedded systems: An Integrated Approach, 1st edition, Pearson Education, 2013
- Steve Furbe, ARM System on chip Architecture, 2nd Edition,Pearson Education, 2015
अक्सर पूछे जाने वाले प्रश्न
पाँचवाँ सेमेस्टर में Electronic System Design and Embedded System कितने अंकों का है?
Electronic System Design and Embedded System (5.3) 100 अंक। कुल: 100 अंक, 3 क्रेडिट। पूरी योजना ऊपर "पूरा सिलेबस" वाले हिस्से में है।
Electronic System Design and Embedded System में किन यूनिट्स का weightage सबसे ज़्यादा है?
Sensors and Actuators और Embedded System और 8051 Microcontroller, 22% प्रत्येक। यूनिट के अनुसार weightage की पूरी तालिका ऊपर "पूरा सिलेबस" वाले हिस्से में है।
Electronic System Design and Embedded System में क्या प्रैक्टिकल कार्य है?
14 practicals/experiments, जिनमें शामिल हैं: Familiarization with different types of PCB’S Materials and their key specifications.(Bakellite,FR4 etc).; Schematic creation and PCB Layout for simple circuits using open source software.; Creating a PCB that is fully prepared for component installation with PCB grounding techniques.। पूरी सूची ऊपर "पूरा सिलेबस" वाले हिस्से में है।
Electronic System Design and Embedded System के लिए किन किताबों को देखें?
सिलेबस में John F. Wakerly,Digital Design: Principles and Practices, 5th edition, Pearson Publications, 2018 और Charles Kitchin and Lew Counts, A Designer’s Guide to Instrumentation Amplifiers,3rd edition, Analog Devices, 2006, सहित अन्य किताबें दी गई हैं। पूरी सूची ऊपर "पूरा सिलेबस" वाले हिस्से में है।
क्या Electronic System Design and Embedded System theory विषय है या practical विषय?
इसका मूल्यांकन Practicum के रूप में होता है — परीक्षा योजना ऊपर "पूरा सिलेबस" वाले हिस्से में देखें।
Electronic System Design and Embedded System सिलेबस PDF कैसे डाउनलोड करें?
PDF मुफ़्त में डाउनलोड के लिए उपलब्ध है — नीचे Download वाले हिस्से में दिए गए download link का उपयोग करें। यह KAMALDNP Academy द्वारा आधिकारिक BTEUP सिलेबस से तैयार किया गया है।
संबंधित सिलेबस पोस्ट
- BTEUP Electronics पाँचवाँ सेमेस्टर सिलेबस 2026-27
- BTEUP Electronics पूरा सिलेबस 2026-27 — तीसरा, चौथा, पाँचवाँ और छठा सेमेस्टर (सभी विषय)
- Optical Fiber Communication — BTEUP Electronics पाँचवाँ सेमेस्टर सिलेबस 2026-27
- Control System & PLC — BTEUP Electronics पाँचवाँ सेमेस्टर सिलेबस 2026-27
- Microwave and Radar — BTEUP Electronics पाँचवाँ सेमेस्टर सिलेबस 2026-27
Electronic System Design and Embedded System सिलेबस PDF डाउनलोड करें
नीचे पूरा Electronic System Design and Embedded System सिलेबस PDF डाउनलोड करें — KAMALDNP Academy द्वारा तैयार, जिसमें topics की पूरी सूची, practicals और संदर्भ पुस्तकें हैं।
Electronic System Design and Embedded System सिलेबस PDF डाउनलोड करें
स्रोत: BTEUP 3rd Year curriculum (folder2627), approved in C.D.C. meeting held on 16.07.2026। Topic सूचियाँ आधिकारिक सिलेबस के अनुसार हैं; छोटे सारांश लेखक के अपने सरल शब्दों में लिखे गए हैं, सिलेबस का मूल पाठ नहीं हैं। कृपया अपने पॉलिटेक्निक से किसी भी स्थानीय बदलाव की पुष्टि कर लें।
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!