SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
GTU Gujarat Diploma

Gujarat Diploma (GTU) Guide 2026-27: Courses, Exam Pattern, Branches & Dates

KAMALDNP Raj Kamal
November 19, 2026
8 Min Read
Gujarat Diploma (GTU) Guide 2026-27: Courses, Exam Pattern, Branches & Dates

Gujarat Diploma (GTU) — The Complete Guide for 2026-27

Gujarat's diploma system works differently from most states: there is no separate diploma board. Diplomas are awarded by Gujarat Technological University (GTU), Ahmedabad, and admissions are run by the Admission Committee for Professional Diploma Courses (ACPDC) under the Directorate of Technical Education, Gujarat. The course is the three-year Diploma in Engineering — six semesters, usually just called Polytechnic — taught under GTU's current curriculum, COGC-2021. This guide explains how the whole system works: the university, the branches, the first-year subjects, the exam pattern, the Winter 2026 exam-date situation, and how admission works.

Sources: the exam scheme and unit-wise marks in this guide come from GTU's own COGC-2021 course curriculum PDFs (Design of Structures 4360601, Ground Water Engineering 4360607, Computer Maintenance & Troubleshooting 4360701) as mirrored on institute websites — the official GTU syllabus portal was too unstable to fetch from during this check. Admission dates, seat figures and cutoffs come from education portals and press reports, and are labelled as such where they matter. Where a date is not yet announced, this guide says so plainly instead of guessing. Facts checked 19 November 2026.

The university: GTU

Gujarat Technological University (GTU), Ahmedabad, designs the diploma curricula, conducts the semester examinations and awards the diploma. There is no separate state diploma board in Gujarat — GTU is the awarding body for engineering diplomas.

  • Official website: gtu.ac.in — reachable and working when checked on 19 November 2026 (the homepage is a JavaScript app; content pages live on the older GTU host).
  • Student portal: student.gtu.ac.in — exam forms are filled here.
  • Results: gturesults.in.
  • Syllabus portal: syllabus.gtu.ac.in — an ASP.NET form (course → branch → semester → academic year). It returned a page once during this check and then timed out on retries, so if it does not load for you, try again later or check your institute's website, which often mirrors the same course PDFs.
  • Admissions are handled separately by ACPDC — see the Gujarat diploma admission guide for the full process.

How the system works

The Diploma in Engineering is a 3-year course in 6 semesters. The current curriculum is COGC-2021 (Competency-focused Outcome-based Green Curriculum 2021), developed with NITTTR Bhopal. Unlike some states, GTU publishes the syllabus course-wise — one PDF per subject — not as a single per-branch book. Each course PDF states its own teaching scheme, exam scheme, unit outcomes, topics and a specification table distributing the theory marks unit-wise.

The first year is largely common across branches. Semester 1 Mathematics (course code 4300001) is prescribed for all branches, and Semester 1 also includes Applied Physics, Basic Engineering Drawing & Graphics, and Communication Skills in English — with branch variations (Computer Engineering, for example, adds Basic Computer Programming).

Each semester mixes theory subjects with practicals and a micro-project. The theory continuous assessment (30 marks) includes 10 marks for a micro-project and 20 marks from the average of two tests taken during the semester.

Branches on offer

The standard high-intake branches — Civil, Mechanical, Computer, Electrical and IT — are offered at nearly every polytechnic in Gujarat. Education portals list 36 diploma branches across the state's institutes, covering the core engineering branches plus specialist ones. Branch-level demand figures (closing ranks per branch) could not be verified for this guide, so no branch ranking is given here.

What is clear is where demand concentrates: in Round 1 of ACPDC 2026 admissions, government and grant-in-aid institutes recorded 87.3% seat allotment, against 28.8% in self-financed institutes — government seats are the ones students compete hardest for. The largest government polytechnic, Government Polytechnic Ahmedabad (established 1957), has 1,465 diploma seats across 13 courses; a typical government polytechnic takes 60 students per branch.

Exam pattern

The pattern below is taken from the GTU COGC-2021 course PDFs themselves.

  • Theory: Continuous Assessment 30 + End Semester Exam 70 = 100 marks per subject. Of the 30 CA marks, 10 are for the micro-project and 20 are the average of two tests.
  • Practical: CA 25 + ESE 25 = 50 marks. Total per subject: 150 marks.
  • Unit-wise weightage is published: every course PDF carries a specification table distributing the 70 theory marks across its units (at Remember / Understand / Apply levels). For example, in Design of Structures (4360601), Units II and IV carry 12 marks each; in Ground Water Engineering (4360607), Unit IV carries 18 marks. The table is a guideline — the actual paper may vary slightly.
  • Section-wise split is not published: GTU does not fix how the 70-mark paper is divided into sections, so do not trust any fixed section-wise split quoted elsewhere unless it comes from GTU.
  • Exams run twice a year: Winter (odd semesters, November/December) and Summer (even semesters, April/May). Results are published on gturesults.in.
  • Pass percentage: one education portal reports 35% for GTU diploma candidates. The GTU exam rules document itself could not be fetched for this guide, so treat the 35% figure as reported, not verified from the primary source.
A note on one source PDF: the Ground Water Engineering (4360607) course PDF prints its theory scheme as CA 70 / ESE 30, which contradicts its own specification table (which totals 70 marks) and the other two course PDFs (CA 30 / ESE 70). This guide follows the 70-mark end-semester paper, which is consistent across the documents.

Winter 2026 exam dates — what is known

The Winter 2026 theory date sheet has NOT been released as of 19 November 2026. Do not trust any date sheet circulating on social media or unofficial sites until GTU publishes it.

What is confirmed is the exam-form cycle. GTU circulars dated 29 October, 4 November and 7 November 2026 (Refs GTU/Exam Form/DE/W2026/8472 and /8660) opened or extended Winter 2026 exam-form filling for Diploma in Engineering students — Regular, Remedial, Term Extension, Working Professional and UFM Released — with filing windows running 31 October–18 November, 31 October–23 November, 4–8 December, 4–27 December and 4 November–31 December 2026 depending on semester and group, all with nil penalty. Forms are filled online at student.gtu.ac.in.

The odd term for 2026-27 concluded on 30 October 2026, and regular odd-semester theory exams are tentatively set for late November or December per the GTU academic calendar. Summer 2026 results were released in September 2026.

Admission in brief

There is no entrance exam for diploma admission in Gujarat. Admission is by ACPDC centralised merit on Class 10 (SSC) marks, through three channels (SSC, TEB and ITI). Minimum eligibility is a Class 10 pass with 35% aggregate including Mathematics, Science and English. The 2026-27 cycle is concluded — registration ran 8 May to 19 June 2026, and the first-year session began on 24 July 2026. Full dates, rounds and seat figures are in the Gujarat diploma admission guide.

The BTech route after diploma

Diploma holders enter the second year of BE/BTech through DDCET (Diploma to Degree Common Entrance Test), conducted by ACPC Gujarat — the DDCET 2026 exam was held on 26 April 2026. ACPC lateral-entry counselling for BE is otherwise based on diploma percentage merit (minimum 45% in the diploma for LDCE). Students coming from Class 12 take the GUJCET route instead; GUJCET is not required for diploma admission. Details of both routes are in the admission guide.

Where to check the official syllabus

GTU publishes syllabi course-wise at syllabus.gtu.ac.in — select Diploma in Engineering, then your branch, semester and academic year. The portal was unstable during this check (one successful fetch, then timeouts), and one institute mirror site (gpvalsad.ac.in) is under security maintenance, so if a link fails, try your own institute's website or the GTU portal again later. Government polytechnic sites commonly mirror the same official COGC-2021 course PDFs.

Frequently asked questions

Is there a separate diploma board in Gujarat?
No. Diplomas are awarded by Gujarat Technological University (GTU), Ahmedabad. Admissions are run by ACPDC.

How many marks is the GTU diploma theory paper?
The end-semester theory paper is 70 marks, with 30 marks of continuous assessment (10 for a micro-project, 20 from two tests). Practicals add 50 marks (25 + 25), for 150 marks per subject.

Is there an entrance exam for Gujarat diploma admission?
No. Admission is by ACPDC merit on Class 10 marks. GUJCET is for BE/BTech admission after Class 12, not for diplomas.

Has the Winter 2026 date sheet been released?
No — not as of 19 November 2026. Only the exam-form cycle is confirmed so far. Check gtu.ac.in and student.gtu.ac.in for the official date sheet when it appears.

What is COGC-2021?
The Competency-focused Outcome-based Green Curriculum 2021 — GTU's current diploma curriculum, developed with NITTTR Bhopal and published course-wise, one PDF per subject.

Where do GTU diploma results come out?
On gturesults.in.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →