SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Industrial Automation and Control — BTEUP Electrical 4th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
October 27, 2026
7 Min Read
Industrial Automation and Control — BTEUP Electrical 4th Semester Syllabus 2026-27
कृपया ध्यान दें — कवर वर्ष बनाम स्वीकृति: इस पाठ्यक्रम के लिए BTEUP की अपनी फ़ाइल के कवर पर "YEAR 2025-2026" छपा है, जबकि उसके हर पृष्ठ पर स्वीकृति पंक्ति "UPDATED AND APPROVED BY BOARD OF TECHNICAL EDUCATION U.P. LUCKNOW IN C.D.C MEETING HELD ON 16.07.2026" है। यह BTEUP के 2026-27 फ़ोल्डर (folder2627) में रखी है, इसलिए उस स्वीकृति के आधार पर इसे यहाँ 2026-27 सिलेबस माना गया है। इसमें दी गई योजना 2025-26 की योजना से विषय-दर-विषय और अंक-दर-अंक समान है।

Industrial Automation and Control — यह विषय किस बारे में है

आधुनिक कारखाने PLCs और SCADA पर चलते हैं — ladder logic का पालन करने वाली machines और पूरे संयंत्र पर नज़र रखने वाली screens। Industrial Automation and Control आपको industrial automation systems को maintain करना सिखाता है, shop floor के PLC से लेकर control room की SCADA screen तक। यह Program Elective-1, Option 1 है: आप यह विषय या Industrial Instrumentation and Condition Monitoring चुनते हैं।

पाँचों units हैं: industrial automation का परिचय, PLC fundamentals, PLC programming और applications, electric drives और special machines, और SCADA systems। PLC programming सबसे भारी unit है — 28% (05 पीरियड) — ladder logic, timers, counters, comparison और data-handling instructions, और traffic-light control, elevator control और tank-level control जैसे applications। यह practicum विषय है (L 1 – P 4) जिसमें 13 practicals हैं और 7 संदर्भ पुस्तकें हैं।

Subject 4.4.1 (Program Elective-1, Practicum) • Total 100 Marks • 3 Credits • L 1 – P 4 • Choose this OR Industrial Instrumentation and Condition Monitoring • 4th सेमेस्टर — Electrical Engineering • सत्र 2026–27

Block diagram of a PLC control loop with a sensor, PLC, actuator and machine
ऑटोमेटेड सिस्टम में सेंसर बताता है, PLC फैसला करता है और एक्चुएटर काम करता है — यह चक्र अपने आप मिनट में सैकड़ों बार चलता है।

आप क्या पढ़ेंगे

Unit – I: Introduction to Industrial Automation (02 Periods, 17%)

Need and benefits; Types of automation system: Fixed, Programmable, Flexible; Different systems used for Industrial automation: PLC, HMI, SCADA, DCS, Drives.

Unit – II: PLC Fundamentals Building blocks of PLC (02 Periods, 17%)

Components of PLC - CPU, Memory organization, Input-output modules (discrete and analog), I/O Modules, Power supply, Fixed and Modular PLC, Redundancy in PLC module, I/O module selection criteria, Interfacing different I/O devices with appropriate I/O modules.

Unit – III: PLC Programming and Applications (05 Periods, 28%)

PLC I/O addressing; PLC programming Instructions: Relay type instructions, Timer instructions: On delay, off delay, retentive, Counter instructions: Up, Down, High speed, Logical instructions, Comparison Instructions, Data handling Instructions, Arithmetic instructions; PLC programming language: Functional Block Diagram (FBD), Instruction List, Structured text, Sequential Function Chart (SFC), Ladder Programming; Simple Programming examples using ladder logic: Language based on relay, timer counter, logical, comparison, arithmetic and data handling instructions; PLC Based Applications: Motor sequence control, Traffic light control, Elevator control, Tank Level control, Conveyor system, Stepper motor control.

Unit – IV: Electric Drives and special machines (02 Periods, 19%)

Electric drives: Types, functions, characteristics, four quadrant operation; DC and AC drive controls: V/F control, Parameters, direct torque control; Drives: Specifications, Applications - Speed control of AC motor / DC Motor.

Unit – V: Supervisory Control and Data Acquisition (SCADA) System (03 Periods, 19%)

Introduction to SCADA: Typical SCADA architecture/block diagram, Benefits of SCADA; Various editors of SCADA; Interfacing SCADA system with PLC: Typical connection diagram, Object Linking & embedding for Process Control (OPC) architecture, Steps in Creating SCADA Screen for simple object, Steps for Linking SCADA object (defining Tags and Items) with PLC ladder program using OPC; Applications of SCADA: Traffic light control, water distribution, pipeline control.

प्रैक्टिकल कार्य

  • Unit I — Identify various automation systems available in different appliances/ devices/ machines in day-to-day use.
  • Unit II — Identify various parts of the given PLC and front panel status indicators.
  • Unit III — Use PLC to test the START STOP logic using two inputs and one output.
  • Unit III — Develop/Execute a ladder program for the given application using following: timer, counter, comparison, logical, arithmetic instructions.
  • Unit III — Use PLC to control the following devices like lamp, motor, push button switches, proximity sensor.
  • Unit III — Measure the temperature of the given liquid using RTD or Thermocouple and PLC.

और भी हैं — 13 प्रैक्टिकल्स की पूरी सूची PDF के अंदर है।

पूरा सिलेबस

आधिकारिक सिलेबस से पूरी परीक्षा योजना, प्रैक्टिकल्स की पूरी सूची और संदर्भ पुस्तकें। यूनिट-वार विषय ऊपर "आप क्या पढ़ेंगे" वाले भाग में हैं।

परीक्षा योजना

कोडपेपरप्रकारL – Pक्रेडिटआंतरिकबाह्यकुल
4.4Program Elective -1: Industrial Automation and ControlPracticum1 – 436040 (3 hrs)100
Industrial Automation and Control Total36040100

यूनिट्स एक नज़र में

यूनिटविषयपीरियडअंकों का हिस्सा
IIntroduction to Industrial Automation0217%
IIPLC Fundamentals Building blocks of PLC0217%
IIIPLC Programming and Applications0528%
IVElectric Drives and special machines0219%
VSupervisory Control and Data Acquisition (SCADA) System0319%

प्रैक्टिकल्स की पूरी सूची

यह आधिकारिक सिलेबस से प्रैक्टिकल्स की पूरी सूची है।

  • Unit I — Identify various automation systems available in different appliances/ devices/ machines in day-to-day use.
  • Unit II — Identify various parts of the given PLC and front panel status indicators.
  • Unit III — Use PLC to test the START STOP logic using two inputs and one output.
  • Unit III — Develop/Execute a ladder program for the given application using following: timer, counter, comparison, logical, arithmetic instructions.
  • Unit III — Use PLC to control the following devices like lamp, motor, push button switches, proximity sensor.
  • Unit III — Measure the temperature of the given liquid using RTD or Thermocouple and PLC.
  • Unit III — Develop and test ladder program to blink the LED/lamp.
  • Unit III — Develop ladder program for Traffic light control system.
  • Unit III — Develop and test ladder program for pulse counting using limit switch / Proximity sensor.
  • Unit III — Develop and test ladder program for rotating stepper motor in forward and reverse direction at constant speed.
  • Unit IV — Identify various front panel controls of VFD (smart drive).
  • Unit V — Use various functions of SCADA simulation editors to develop simple project.
  • Unit V — Develop a SCADA mimic diagram for Tank level control.

संदर्भ पुस्तकें

सिलेबस में दी गई सूची के अनुसार:

  • Dunning, G., Introduction to Programmable Logic Controllers, Thomson / Delmar learning, New Delhi, 2005, ISBN 13: 9781401884260
  • Jadhav, V. R., Programmable Logic Controller, Khanna publishers, New Delhi, 2017, ISBN: 9788174092281
  • Petruzella, F.D., Programmable Logic Controllers, McGraw Hill India, New Delhi, 2010, ISBN: 9780071067386
  • Hackworth, John; Hackworth, Federic, Programmable Logic Controllers, PHI Learning, New Delhi, 2003, ISBN: 9780130607188
  • Stenerson Jon, Industrial automation and Process control, PHI Learning, New Delhi, 2003, ISBN: 9780130618900
  • Mitra, Madhuchandra; Sengupta, Samarjit, Programmable Logic Controllers and Industrial Automation - An introduction, Penram International Publication, 2015, ISBN: 9788187972174
  • Boyar, S. A., Supervisory Control and Data Acquisition, ISA Publication, USA, ISBN: 978-1936007097

अक्सर पूछे जाने वाले प्रश्न

चौथा सेमेस्टर में Industrial Automation and Control कितने अंकों का है?
कुल 100 अंक, 3 क्रेडिट। Practicum विषय (L 1 – 4): आंतरिक 60, बाह्य 40 (3 hrs)।

Industrial Automation and Control में सबसे ज़्यादा भार वाली unit कौन सी है?
PLC Programming and Applications, 28% (05 पीरियड)।

Industrial Automation and Control में कितने practicals हैं?
13 practicals — पूरी सूची ऊपर पूरा सिलेबस वाले भाग में है, और PDF में भी है।

Industrial Automation and Control के लिए कौन सी किताबें पढ़नी चाहिए?
आधिकारिक सिलेबस में 7 संदर्भ पुस्तकें सूचीबद्ध हैं — पूरी सूची ऊपर पूरा सिलेबस वाले भाग में है।

Industrial Automation and Control सिलेबस PDF कैसे डाउनलोड करूँ?
PDF मुफ़्त डाउनलोड के लिए है — नीचे Download वाले भाग में दिए गए लिंक का उपयोग करें। यह KAMALDNP द्वारा आधिकारिक BTEUP सिलेबस से तैयार किया गया है।

मुझे Industrial Automation चुनना चाहिए या Industrial Instrumentation?
दोनों Program Elective-1 (4.4) के दो विकल्प हैं — आप इनमें से एक चुनते हैं। Industrial Automation PLCs, ladder programming, drives और SCADA के बारे में है; Instrumentation transducers, measurement और condition monitoring के बारे में है। देखें कि आपका polytechnic कौन सा विकल्प पढ़ाता है।

संबंधित सिलेबस पोस्ट

Industrial Automation and Control सिलेबस PDF डाउनलोड करें

नीचे Industrial Automation and Control का पूरा सिलेबस PDF डाउनलोड करें — KAMALDNP द्वारा तैयार, जिसमें topics की पूरी सूची, practicals और संदर्भ पुस्तकें हैं।

Industrial Automation and Control सिलेबस PDF डाउनलोड करें

स्रोत: BTEUP द्वितीय वर्ष Electrical Engineering curriculum (folder2627)। फ़ाइल के कवर पर "YEAR 2025-2026" छपा है, लेकिन स्वीकृति पंक्ति "UPDATED AND APPROVED BY BOARD OF TECHNICAL EDUCATION U.P. LUCKNOW IN C.D.C MEETING HELD ON 16.07.2026" हर पृष्ठ पर (95 बार) है, और उस स्वीकृति के आधार पर इसे यहाँ 2026-27 सिलेबस माना गया है। विषय-सूचियाँ आधिकारिक सिलेबस के अनुसार हैं; छोटे स्पष्टीकरण लेखक के अपने सरल हिंदी सारांश हैं, सिलेबस का मूल पाठ नहीं। अपने पॉलिटेक्निक में किसी भी स्थानीय बदलाव की पुष्टि अवश्य करें।

Download Attached Resources

The author has provided premium resources (PDF, Source Code, Notes) for you to access.

Click Here to Download File

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →