SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
SCTE&VT Odisha Diploma

Odisha Diploma (SCTE&VT) Guide 2026-27: Courses, Annual Exam Pattern, Branches & Dates

KAMALDNP Raj Kamal
November 19, 2026
10 Min Read
Odisha Diploma (SCTE&VT) Guide 2026-27: Courses, Annual Exam Pattern, Branches & Dates

Odisha Diploma (SCTE&VT) — The Complete Guide for 2026-27

Odisha's diploma system runs through the State Council for Technical Education & Vocational Training (SCTE&VT), Bhubaneswar, working under the state's Skill Development & Technical Education (SDTE) Department. The course is the three-year Diploma in Engineering — usually just called Polytechnic — and if you joined in 2026-27, you are studying under a brand-new first-year syllabus and a brand-new exam pattern. This guide explains how the whole system works: the board, the big 2026-27 change, the branches, the first-year subjects, the exam pattern, the exam-date situation, and how admission works.

What is new in 2026-27 — read this first: from this session, the first year of the diploma is examined once a year (annual pattern) instead of in two semester-end examinations. The state government approved amendments to the SCTE&VT Examination Rules (SDTE Department letter No. SDTE-5987, dated 31 October 2026; Amended Examination Rules 2026, effective immediately from the Winter 2026 examination). First-year students now take one annual examination at the end of the academic year, in April–May. The change applies to first-year students only — the semester pattern continues for the second and third years. The council said the decision, taken in June 2026, aims to reduce the dropout rate, and a revised first-year syllabus was introduced from 2026-27 along with it. If you joined in 2026-27, do not plan around semester exams in your first year — there is one annual exam.

Sources: the facts in this guide come from the SCTE&VT first-year common syllabus 2026-27 (the council's own document, read from a mirror copy because the council's website was unreachable from our workspace on the check date — the document's title, scheme table and 1,200-mark / 29-credit totals match the official document as indexed), the official Amended Examination Rules 2026, the official Winter 2026 examination notice, and the DTET spot-admission notice. Admission figures and institute details come from education portals and are labelled as indicative where they matter. Where a date is not yet announced, this guide says so plainly instead of guessing. Facts checked 19 November 2026.

The board: SCTE&VT

The State Council for Technical Education & Vocational Training (SCTE&VT), Odisha is the state body that designs the diploma curricula, conducts the examinations and awards the diploma. It works under the Skill Development & Technical Education (SDTE) Department of the Government of Odisha.

  • Office: Unit-8, Near Raj Bhawan, Bhubaneswar, Odisha 751012.
  • Phone: (0674) 2392913.
  • Official website: sctevt.odisha.gov.in — syllabus pages, exam notices and notifications. (The site was unreachable from our workspace on 19 November 2026, though it is live and freshly indexed; if a page does not open for you, try again later or from another network.)
  • Admissions are handled separately by the Directorate of Technical Education & Training (DTET), Odisha (Cuttack), through the SAMS Odisha portal — see the Odisha diploma admission guide for the full process.

How the system works

The Diploma in Engineering is a 3-year course. Under the same council, SCTE&VT also runs D.Voc programmes, PDIS and the Diploma in Pharmacy. The first year is now annual; the second and third years continue on the semester pattern.

The examination calendar under the amended rules runs as follows:

  • First-year annual examination — at the end of the academic year, preferably April–May. For the 2026-27 batch, that means April–May 2027; no date has been announced yet (see below).
  • Winter Semester examinations — preferably November–December, for the odd semesters (3rd and 5th — regular and ex-regular students).
  • Summer Semester examinations — preferably April–May, for the even semesters (4th and 6th). Fifth-semester back papers are conducted along with the 6th semester.
  • The pre-amendment rules still apply to students registered before 2026-27 — if you joined earlier, your pattern has not changed.

Each year mixes theory papers with practicals, workshop practice, engineering graphics and sessional work. Theory papers carry an end examination plus progressive (internal) assessment, and the scheme for each subject states its maximum marks.

First-year subjects — the new 2026-27 syllabus

The new first-year common syllabus (for all engineering branches, from academic year 2026-27) has 7 theory papers and 9 practicals, 1,200 total marks and 29 credits. Every theory paper carries 70 marks for the end examination and 30 marks for progressive assessment, with a 3-hour end exam.

CodeTheory paperHours/weekEnd examProgressiveCredits
TH-1Communication Skills in English270302
TH-2Applied Physics470304
TH-3Applied Chemistry & Environmental Science470304
TH-4Mathematics470304
TH-5Fundamentals of Computing & Artificial Intelligence270302
TH-6Fundamentals of Electrical & Electronics Engineering270302
TH-7Engineering Mechanics270302

The nine practicals are: Communication Skills in English Lab, Applied Physics Lab, Applied Chemistry Lab, Computing & AI Lab, Engineering Workshop Practice, Engineering Graphics, Fundamentals of Electrical & Electronics Engineering Lab, Engineering Mechanics Lab, and Sports & Yoga. Workshop Practice and Engineering Graphics carry 100 marks each; the other labs carry 25–50 marks each.

How internal assessment works: three internal tests are conducted during the year, and the average of the best two counts as the internal-assessment marks. Assignments and quizzes (10 marks) form part of the internal assessment, and a monthly test is conducted for each subject. Sessional marks are the total of your performance across the different jobs and experiments in a subject through the year. Take the internals seriously — with the annual pattern, they are your only formal checkpoints before the year-end exam.

One detail worth knowing: in several subjects, the syllabus lists only part of the units for the end examination — the remaining units are covered by the internal assessments. For example, the Mathematics end exam covers determinants and matrices, vector algebra, differentiation and integral calculus with differential equations, while trigonometry, coordinate geometry, complex numbers and partial fractions are assessed internally. Check your own subject's "Portion for End Examination" line in the syllabus before you plan revision — and do not skip the internal-assessment units, because they still count through your internal marks.

Exam pattern

The pattern below is taken from the official first-year syllabus scheme (2026-27).

  • End examination: 70 marks per theory paper. The council publishes no fixed section-wise mark split for the paper, so do not trust any fixed split you see quoted elsewhere unless it comes from the council.
  • Duration: 3 hours per theory paper.
  • Progressive assessment: 30 marks per theory paper (best two of three internals, plus assignments/quizzes).
  • Practicals: end examination plus progressive assessment, with marks per practical as given in the scheme (25–100).
  • Pass marks: the amended rules contain a pass clause, but the pass-mark percentages were not available in the material checked for this guide — we do not state them here. Confirm the pass rules from your institute or the council's published rules rather than from forwarded messages.
Study tip: with one annual exam instead of two semester exams, the syllabus you must hold in your head at exam time is a full year long. Revise in three passes — once after each internal assessment, using that internal's portion — so that nothing is being read for the first time in April. Unit-wise question practice (one-line facts, short answers and full descriptive answers) matches how the paper is built.

Branches on offer

The council's branch list is large — more than 40 diploma disciplines, including Civil, Mechanical, Electrical, Electronics & Telecommunication, Chemical, Aeronautical, Agriculture, Automation & Robotics, Digital Manufacturing, Architectural Assistantship, Textile Technology and Modern Office Management. The standard government-polytechnic offering is Civil, Mechanical, Electrical and Chemical / Electronics & Telecommunication, typically at 60 seats per branch — for example, Government Polytechnic Jagatsinghpur admits about 270 students across 4 branches, Government Polytechnic Gajapati about 210, and Government Polytechnic Mayurbhanj offers Civil, Metallurgical, Mechanical and Electrical. Branch-level demand evidence (closing ranks, applications per branch) was not available in the sources checked for this guide, so no branch ranking is given here.

Exam dates 2026-27 — Winter exam in progress; first-year annual exam in April–May 2027

The Winter 2026 examination is under way at the time of writing. Per the SCTE&VT notice dated 12 October 2026 (memos 2190–2192, Controller of Examinations):

  • Practical exams: 20–26 November 2026.
  • Theory exams: 27 November – 10 December 2026.
  • It covers Diploma 1st Semester (ex-regular), 3rd and 5th semesters, 6th-semester back papers, D.Voc, PDIS 1st Semester, and Pharmacy 1st Year & 2nd Year supplementary students. Note that regular first-year (2026-27 batch) students are not in this Winter exam — their annual exam comes in April–May 2027.

First-year annual examination (2026-27 batch): expected April–May 2027 under the new rules. No date has been announced in the material seen — any specific April–May 2027 date quoted before the council publishes it is a rumour, not an official date. For a sense of the cycle: the Summer 2026 theory exams ran 29 April – 30 May 2026 in 8:00–11:00 AM sittings, with practicals in May–June.

Admission in brief — merit-based, no written entrance exam for most courses

Admission to the Diploma in Engineering is through the DET (Diploma Entrance Test) Odisha process run by SCTE&VT/DTET — but despite the name, there is no written entrance exam for most diploma courses. Admission is on merit of Class 10 (HSC) marks, with a minimum of 35% aggregate in Mathematics, Science and English. The process runs on the SAMS Odisha portal: online registration (Common Application Form) → document verification → merit list → choice filling → provisional allotment → seat confirmation. Lateral entry to the second year is through an OJEE rank. The 2026-27 cycle is concluded (Phase III spot admission ran 1–14 September 2026). The full process, eligibility, documents and the 2026-27 timeline are in the companion post: Odisha Diploma Admission 2026-27 — DET Merit, SAMS Counselling & Key Dates.

After the diploma — BTech lateral entry via OJEE

Diploma holders can enter the second year of BTech through OJEE (Odisha Joint Entrance Examination), conducted by the OJEE Board (portal: ojee.nic.in). OJEE covers BTech lateral entry — its most sought-after programme — along with BPharm lateral entry and direct admission to MBA and MCA. The 2026 cycle is concluded (registration closed 29 March 2026, exam 4–9 May 2026, result 6 June 2026). BTech lateral-entry seats are estimated at roughly 4,500–5,000 across 89+ colleges (an estimate based on the OJEE 2025 matrix; lateral-entry seats are typically 10% of sanctioned intake per branch, supernumerary). The leading government colleges for lateral entry include VSSUT Burla (Sambalpur), CET Bhubaneswar, IGIT Sarang (Dhenkanal), PMEC Berhampur and the Government Colleges of Engineering at Kalahandi, Keonjhar and Bhawanipatna. First-year BTech admission (the JEE Main route) was not verified in the sources checked for this guide, so it is not described here.

What we could not verify

  • Pass-mark percentages — the amended rules contain a pass clause, but the percentages were not extracted in the material checked. Not stated here.
  • State-level totals — no reliable total of polytechnics or seats in Odisha was found in the sources checked. Not stated here.
  • Branch-level demand — closing ranks and applications per branch were not found. No branch ranking is given.
  • Branch syllabuses (3rd–6th semester) — the council's syllabus index lists 500+ branch/semester documents, but the branch PDF links could not be extracted or downloaded from our workspace. Branch syllabus links are not published here until they are verified in a normal browser.

Key links

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →