Uttarakhand Diploma — What It Is
The Diploma in Engineering & Technology — called Polytechnic across Uttarakhand — is a three-year technical course run by the Uttarakhand Board of Technical Education (UBTER), Roorkee. Admission is through a single state-wide entrance exam, JEEP (Joint Entrance Examination Polytechnic), held once a year. The course runs for 3 years, 6 semesters, after Class 10, and the first year is largely common across the engineering branches. Alongside engineering, UBTER also runs the two-year Diploma in Pharmacy (D.Pharm) and diploma programmes in fashion and textile design.
This guide explains the board, how the course works, the exam pattern with exact marks (taken from the official IRDT CSE syllabus booklet), the branches, the CSE syllabus semester by semester, and the 2026-27 examination dates — including an honest answer on the Winter 2026 date sheet, which has not been released yet.
Uttarakhand Board of Technical Education (UBTER), Roorkee • Syllabus: IRDT Dehradun • Session 2026–27 • 3-Year Diploma in Engineering & Technology • Admission through JEEP

UBTER Uttarakhand at a Glance
| Item | Detail |
|---|---|
| Board | Uttarakhand Board of Technical Education (UBTER), Roorkee — conducts JEEP, frames the curriculum and runs the semester examinations |
| Syllabus body | Institute of Research Development & Training (IRDT), Dehradun — curates the diploma syllabi and publishes the official "E-Syllabus" booklets |
| Course | Diploma in Engineering & Technology — 3 years, 6 semesters, after Class 10; also D.Pharm (2 years) and fashion/textile design diplomas |
| First year | Largely common across engineering branches; branch subjects from the 2nd year (Semester III) |
| Admission | JEEP (Joint Entrance Examination Polytechnic) — 100 objective questions, 3 hours; Group E for Engineering & Technology |
| Lateral entry | Direct 2nd-year admission through JEEP Group A for eligible candidates |
| Session | 16 weeks per semester, effective teaching at least 12.5 weeks; classes for 2026-27 began 17 August 2026 |
| Examinations | Twice a year — Summer (even semesters, May) and Winter (odd semesters, December) |
| Official board site | ubter.in |
| Winter 2026 date sheet | Not released as of 19 November 2026 — see the dates section below |
Two cautions about the official sites: ubter.in is an Angular single-page app — the homepage carries no content links, and notices and date sheets live under /assets/pdf/ and /assets/Scheme/. The IRDT site (irdtuttarakhand.org.in) could not be reached over HTTPS from our workspace on 19 November 2026, but its syllabus PDFs download fine over plain HTTP — the CSE booklet used for this guide was downloaded that way. Always confirm notices on ubter.in itself before acting on them.
How the Course Works
The diploma is a 3-year, 6-semester course after Class 10. The first year (Semesters I–II) is largely common across the engineering branches, and branch subjects begin in the 2nd year (Semester III). Each semester is 16 weeks, with effective teaching of at least 12.5 weeks. Examinations run twice a year: the Summer examination (even semesters) in May and the Winter examination (odd semesters) in December.
Admission to the engineering diploma is through JEEP Group E; other JEEP groups cover Pharmacy (Group P), lateral entry to the 2nd year (Group A) and textile/fashion design (Group T). The full admission process — dates, pattern, eligibility and counselling — is in our separate guide: Uttarakhand Diploma Admission 2026-27 — JEEP Exam, Dates, Pattern, Eligibility & Counselling.
Exam Pattern — Exact Marks from the Official Booklet
The marks below come from the official IRDT CSE booklet 2026-27 (166 pages), the document the syllabus body itself publishes. Every theory subject follows the same frame:
| Component | Marks / time |
|---|---|
| Board theory exam (external) | 50 marks, 2 hours 30 minutes |
| Internal theory | 50 marks (Semesters III–IV); 50–60 marks (Semesters V–VI, per subject) |
| Practical exam (external, where applicable) | 40 marks, 3 hours |
| Practical internal | 60 marks (where applicable) |
So a theory-plus-practical subject in Semester III or IV is typically worth 200 marks in total (50 internal theory + 50 board theory + 60 internal practical + 40 board practical), while a theory-only subject is worth 100. In Semesters V–VI the internal theory rises to 60 marks for most subjects, making a theory-plus-practical subject worth 210.
One honest gap: the official booklet publishes the marks and the hours, but no section-wise question pattern — it does not say how many short questions or long questions a paper holds, or how the 50 marks split between them. Any website claiming a fixed UBTER section pattern is guessing. The practical lesson is the same for every subject: prepare every unit, because no unit is officially skippable.
CSE Syllabus — Semester by Semester
The CSE branch (Branch Code 05) syllabus below is from the official IRDT booklet — Semesters III–IV effective 2026-27, Semesters V–VI effective 2027-28. The 2026-27 booklet adds modern subjects — Python, Introduction to AI & ML, Internet of Things and Web Development Using Python — a clear sign of where the branch is heading.
| Semester | Code | Theory subject |
|---|---|---|
| III | 25053001 | Concepts of C Programming |
| 25053002 | Computer Organization | |
| 25053003 | Operating System | |
| 25053004 | Fundamentals of Internet & Web Design | |
| 25053005 | Open Source Software | |
| IV | 25054001 | Data Structure Using C |
| 25054002 | Object Oriented Concepts Using JAVA | |
| 25054003 | Software Engineering | |
| 25054004 | Computer Networks | |
| 25054005 | Computer System Maintenance | |
| V | 25015055 | Employability Skills |
| 25055001 | Python Programming Fundamentals | |
| 25055002 | Database Management System | |
| 25055003 | Cyber Laws and Security | |
| 25055004 | Introduction to AI & ML | |
| VI | 25056001 | Web Development Using Python |
| 25056002 | Internet of Things | |
| 25056003 | Mobile and Smart Device Technology | |
| 25056004 | Emerging Trends in Computer Science & Engg. | |
| 25016001 | Entrepreneurship and Start-Ups |
Alongside these theory subjects, each semester carries practical work and projects — Minor Projects in Semesters III–IV, a Major Project in Semesters V–VI, and industrial training — which are assessed internally and through practical examinations rather than theory papers.
Branches — What Is on Offer
No official branch-wise applicant data is published for Uttarakhand, so no branch ranking here pretends to be a demand statistic. Ordered by how widely each branch is available across the state's government polytechnics, and by the seat-intake evidence in published sources, the main branches are:
- Civil Engineering — the most widely offered branch across government polytechnics (typically 60 seats per institute). UBTER's civil specialisation runs deep: separate 2026-27 booklets exist for Civil Engineering (Public Health Engineering), Civil Engineering (Environmental & Pollution Control) and Civil and Environmental Engineering.
- Mechanical Engineering — the largest intakes at private polytechnics (up to 120 seats); variants include Mechanical (Production) and Mechanical (Automobile).
- Computer Science & Engineering (Branch Code 05) — the branch whose 2026-27 booklet adds Python, AI & ML, IoT and web development.
- Electrical Engineering and Electronics Engineering — standard offerings at most government polytechnics (60 seats each where offered).
Third-party sites put expected general-category closing ranks at Government Polytechnic Barkot at roughly 1200–2000 for Civil and 1400–2300 for Mechanical — these are expectations from third-party sites, not official cutoffs, and no official cutoff list was found. Branch choice happens at JEEP counselling: the merit list decides who gets which branch and college.
Semester Exam Dates 2026-27
The Winter 2026-27 date sheet has not been released as of 19 November 2026. No winter 2026 scheme appears in UBTER's indexed PDFs or in search results. This guide will not invent paper-wise dates, and neither should any site you read. What is known, for pattern only:
| Event | Date |
|---|---|
| Classes began (2026-27) | 17 August 2026 |
| Summer 2026 semester exams | 12–30 May 2026 (theory papers 1:30–4:00 PM; morning papers 10:00 AM–12:30 PM) |
| Special Back Paper + Pharmacy Supplementary Exam 2026 | From 14 September 2026 |
| Winter 2025-26 exams (last year, for pattern only) | 11–22 December 2025 |
| Winter 2026-27 exams | Date sheet not released as of 19 Nov 2026 |
By last year's pattern, the Winter 2026 exams are expected in mid-December 2026, with the scheme normally published in late November or early December — but that is an expectation, not a date. Re-check ubter.in (under /assets/pdf/ and /assets/Scheme/) in late November and early December 2026, and confirm the scheme there before making plans around it.
After the Diploma — BTech via UTU Merit Counselling
Uttarakhand's BTech admission runs through Veer Madho Singh Bhandari Uttarakhand Technical University (UTU), Dehradun (uktech.ac.in). There is no state engineering entrance exam any more: UKSEE (the Uttarakhand State Entrance Examination) was discontinued from 2024. For 2026-27, UTU admitted BTech students through merit-based online counselling with no entrance test — BTech seats go to JEE Main rank holders first, then Class 12 marks (JEE Main is not compulsory; candidates without it select "No" at registration). Many third-party pages still describe a UKSEE 2026 exam with tentative May/June dates — those pages are outdated and should not be trusted for dates.
Lateral entry into BTech 2nd year is open to diploma holders: a 3-year engineering diploma with 45% (40% for reserved categories), or B.Sc with 45% (40%) and Mathematics in 10+2. A Uttarakhand domicile certificate is required for state-quota seats at counselling. UPES Dehradun admits through its own entrance test, UPESEAT.
How to Prepare in a Semester
- Every theory paper is 50 marks in 2 hours 30 minutes. That is a short paper — there is little room for a weak unit. The booklet publishes no section pattern, so prepare every unit.
- Internal marks are half the theory total. Internal theory is 50 marks (60 in most Sem V–VI subjects) against the board's 50 — class tests, assignments and attendance decide half your theory score before the board paper begins.
- Practicals carry real marks. A theory-plus-practical subject carries 100 practical marks (60 internal + 40 board) — as much as the whole theory side. Lab work is not a side activity.
- Use the gap between classes and exams. The Winter 2026 scheme is expected in late November or early December; finish the syllabus before it appears, and use the gap for full-paper practice under timed conditions.
- Check ubter.in directly. Date sheets and notices appear under /assets/pdf/ and /assets/Scheme/ — check there rather than trusting forwarded screenshots or third-party date lists.
Frequently Asked Questions
What is UBTER?
The Uttarakhand Board of Technical Education, Roorkee. It conducts the JEEP entrance exam, frames the diploma curriculum (through IRDT Dehradun), and runs the semester examinations for the state's polytechnics. Its official site is ubter.in.
How long is the Uttarakhand diploma?
Three years, six semesters, after Class 10. The first year is largely common across engineering branches; branch subjects begin in the second year (Semester III). Lateral entry to the 2nd year is available through JEEP Group A.
How many marks is the theory paper?
Each theory subject has a board paper of 50 marks in 2 hours 30 minutes, plus internal theory of 50 marks (60 in most Semester V–VI subjects). Practical subjects add 60 internal practical marks and a 40-mark board practical (3 hours).
Is there a fixed question pattern for UBTER papers?
No published one. The official booklet gives the marks and the hours but no section-wise pattern — no official split between short and long questions. Any site claiming a fixed UBTER section pattern is guessing.
When are the Winter 2026 exams?
The Winter 2026-27 date sheet has not been released as of 19 November 2026. Last year's winter exams ran 11–22 December 2025; by that pattern the Winter 2026 exams are expected in mid-December 2026, with the scheme normally published in late November or early December. That is an expectation, not a date — confirm on ubter.in.
How do I get admission to a Uttarakhand polytechnic?
Through JEEP (Joint Entrance Examination Polytechnic) — 100 objective questions in 3 hours. Group E is for Engineering & Technology. The 2026 cycle is complete; the full process is in our separate guide: Uttarakhand Diploma Admission 2026-27 — JEEP Exam, Dates, Pattern, Eligibility & Counselling.
Which is the most in-demand diploma branch in Uttarakhand?
No official branch-wise applicant data is published, so there is no verified demand ranking. Civil Engineering is the most widely offered branch across government polytechnics; Mechanical has the largest private intakes; CSE's 2026-27 booklet adds Python, AI & ML and IoT.
Is there an entrance exam for BTech in Uttarakhand?
No state entrance exam: UKSEE was discontinued from 2024. UTU admits BTech students through merit-based online counselling — JEE Main rank holders first, then Class 12 marks; JEE Main is not compulsory. Diploma holders can enter BTech 2nd year directly (lateral entry) with 45% (40% for reserved categories).
Where can I check official UBTER notices?
On the board's website, ubter.in — notices and date sheets live under /assets/pdf/ and /assets/Scheme/. Always confirm dates and notices there before acting on them.
Sources and Honesty Note
The scheme table, marks and CSE subject lists in this guide come from the official IRDT CSE booklet 2026-27 (166 pages), downloaded from irdtuttarakhand.org.in and read in full. The examination dates come from official UBTER documents: the Summer 2026 date sheet (final, 28 April 2026), the Special Back Paper 2026 scheme (10 September 2026) and the Winter 2025-26 scheme (used as a clearly-labelled pattern reference only). The JEEP and counselling facts come from official UBTER notices and the JEEP 2026 counselling schedule; the BTech facts come from Aglasem and SarvGyan coverage. What this guide deliberately does not claim: no Winter 2026-27 paper-wise dates (not released), no fixed UBTER section-wise question pattern (not published), no official cutoffs or closing ranks (not published), no branch-wise seat or demand figures (not found), no total count of programmes or institutes (the commonly repeated figures could not be re-verified), and no JEEP applicant total (not found). Nothing in this guide is copied from the syllabus booklet beyond short factual labels (unit names, codes, marks).
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!