SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Computer Aided Design & Manufacturing — BTEUP Mechanical 5th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
9 Min Read
Computer Aided Design & Manufacturing — BTEUP Mechanical 5th Semester Syllabus 2026-27

Computer Aided Design & Manufacturing — What This Subject Is About

Manufacturing today belongs to computerized equipment and machine tools that make a variety of components with high quality, high precision and low cost at a faster rate. Computer Aided Design & Manufacturing is the subject that teaches you how that works: how a part is drawn on a computer (CAD), how the computer tells the machine to cut it (CAM), how the two join up with flexible manufacturing systems into computer integrated manufacturing (CIM), and how a prototype can be printed in hours instead of machined in days.

The subject has only three units: an introduction to CAD, CAM, CIM and CNC with rapid prototyping; surface and solid modelling using CAD/CAM; and flexible manufacturing systems. It is a qualifying Open Elective-III subject: you must pass it, but its 50 internal marks are not counted in your percentage or division, and there is no external paper. The syllabus prints no unit-wise periods or marks distribution, so no weightage is claimed anywhere on this page.

Students in my class always mix up CAD and CAM: CAD draws the part, CAM tells the machine how to cut it. One makes the drawing, the other makes the part — and this subject is about both, plus the systems that tie them together.

Subject 5.6.1 (Open Elective-III, Qualifying) • 50 Marks Internal Only • 2 Credits • L 2 – P 0 • 5th Semester — Mechanical Engineering (Production) • Session 2026–27

Note: This is one Open Elective-III option in the 5th semester. You choose ONE option: Computer Aided Design & Manufacturing, Reverse Engineering, Artificial Intelligence, Automobile Engineering, or any minimum-2-credit course (NPTEL/SWAYAM/AICTE-ELIS/C-DAC/IIT-NIT/ISRO/Tata Tech). The four taught options are linked in the Related Posts section below.
Computer Aided Design & Manufacturing syllabus — CAD/CAM, CNC and flexible manufacturing, BTEUP Mechanical 5th semester 2026-27
From drawing to machine: CAD designs the part, CAM tells the machine how to cut it, and FMS runs the whole shop.

What You Will Study

Unit I — Introduction

Introduction to CAD, CAM & CIM; advantages of CAD & CAM; product cycle; reasons for implementation of CAD & CAM; steps involved in CAM operation; introduction to CNC; CNC programming (G-codes, M-codes, APT programming). Rapid prototyping: 3D printing, fused deposition modeling, laminated object manufacturing, selective laser sintering, stereo lithography, ballistic particle manufacturing.

What CAD, CAM and CIM mean and why industry uses them, how a CNC machine is programmed (G-codes and M-codes), and the six rapid prototyping methods that print a part instead of cutting it.

Unit II — Surface / Solid Modelling Using CAD/CAM

Introduction to parametric and non-parametric surfaces; creation of simple surfaces using revolved surface, ruled surface and 3D surfaces commands; designing software used in creation of solid models; concept of solid models; solid primitives — box, cylinder, cone, sphere, wedge and torus; construction of solid using Region, Extrude and Revolved feature; creation of composite solid using Boolean function e.g. union, subtraction and intersection; sectioning of solids and modification of solid edges and faces using solid editing commands; Shell, Separate commands; performing 3D operations like 3D array, mirror and rotate; creation of fillets and chamfers; dimensioning of solids; 2D and 3D transformation: translation, scaling, rotation, mirror, zooming, panning and clipping.

The longest unit: how surfaces and solids are built in CAD — primitives, Boolean operations, editing commands and the transformations that move, scale and rotate a model.

Unit III — Flexible Manufacturing System

Introduction to FMS; principles of flexibility; changes in manufacturing system — external changes and internal changes; job flexibility, machine flexibility; features of FMS — production equipment, support system, material handling system, computer control system; advantages & limitations of FMS.

What makes a manufacturing system flexible, the four features every FMS has, and where flexible manufacturing wins — and where it does not.

Complete Syllabus

The full examination scheme and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above. The syllabus prints no unit-wise periods and no marks-distribution table for this subject.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
5.6.1Computer Aided Design & ManufacturingQualifying2 – 0250—50†

Units at a Glance

UnitTopic
IIntroduction — CAD, CAM, CIM, CNC, rapid prototyping
IISurface / Solid Modelling Using CAD/CAM
IIIFlexible Manufacturing System

Reference Books

As listed in the syllabus:

  • CAD/CAM by Mikell Groover and Zimmers; Prentice Hall of India Pvt. Ltd., Delhi.
  • Computer Aided Manufacturing by Rao, Kundra and Tiwari; Tata McGraw Hill, New Delhi.
  • Introduction to Robotics by John J. Craig; Pearson Education Asia, Singapore.
  • Industrial Robot by Groover; Prentice Hall of India Pvt. Ltd., Delhi.
  • Robotics by Yoram Koren; McGraw Hill International Book Co., New Delhi.
  • CAD/CAM – Theory and Practice by Zeid; Tata McGraw Hill Publishers, New Delhi.
  • CAD/CAM/CIM by S. Radha Krishnan.
  • CNC Machines by Dr. B.S. Pabla – New Age Publications.
  • e-books/e-tools/relevant software to be used as recommended by AICTE/BTE/NITTTR, Chandigarh.
  • http://swayam.gov.in

How to Prepare for Computer Aided Design & Manufacturing

Start with Unit I, in order. The definitions (CAD, CAM, CIM, product cycle) and the CNC programming basics (G-codes, M-codes, APT) are the vocabulary the rest of the subject uses. Students who jump straight to solid modelling without the Unit I vocabulary always struggle.

Give Unit II the most time. It is the longest unit and the most practical: practise the solid modelling ideas (primitives, Boolean operations, editing commands, transformations) until you can describe them without notes. Learn the six solid primitives and the three Boolean operations by name.

Learn the six rapid prototyping methods as a list. 3D printing, fused deposition modeling, laminated object manufacturing, selective laser sintering, stereolithography, ballistic particle manufacturing — a list question on these is the easiest five marks in the subject.

Finish Unit III with a structured FMS answer. Four features (production equipment, support system, material handling system, computer control system), the two kinds of flexibility (job and machine), then advantages and limitations in two short columns.

Finish with timed practice. Work through the practice sets in one sitting of 2.30 hours, without notes — the suggested practice time. Then compare your answers with the model answer outline and note the points you missed.

Exam Tips

  • Remember it is qualifying. There is no external paper — your 50 marks come from internal assessment. Take the internal tests and assignments seriously; a fail here still means a fail, even though the marks do not count towards your division.
  • Attempt all five questions in the practice paper. The pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered — pick the two parts you know best in every question, and do not leave any question blank.
  • Learn the lists by name. Six rapid prototyping methods, six solid primitives, three Boolean operations, four FMS features — this subject rewards students who can write a complete, correctly named list.
  • Draw where it helps. A labelled sketch of a CNC machine layout or an FMS layout earns marks that a paragraph alone does not.
  • Do not invent weightage. The syllabus prints no unit-wise marks distribution — prepare all three units, and give Unit II the most time because it is the longest, not because any marks split says so.

Frequently Asked Questions

Is Computer Aided Design & Manufacturing a qualifying subject?
Yes. It is an Open Elective-III subject, assessed internally for 50 marks only, with no external examination. You must pass it, but its marks are not added to your awarded division or total marks.

Which Open Elective-III options can I choose instead?
You choose ONE option: Computer Aided Design & Manufacturing, Reverse Engineering, Artificial Intelligence, Automobile Engineering, or any minimum-2-credit course (NPTEL/SWAYAM/AICTE-ELIS/C-DAC/IIT-NIT/ISRO/Tata Tech). The four taught options are linked in the Related Posts section below.

How many units are there in this subject?
Three units in the official syllabus: Introduction (CAD/CAM/CIM, CNC, rapid prototyping), Surface/Solid Modelling, and Flexible Manufacturing System. The notes split them into five study units so the practice paper follows the board's five-question pattern — nothing is added and nothing is dropped.

Does the syllabus give a unit-wise marks distribution?
No. The official syllabus prints no unit-wise periods and no marks-distribution table for this subject, so no weightage is claimed on this page or in the notes.

Which books should I refer to?
The syllabus lists 10 references, including CAD/CAM by Groover and Zimmers and CNC Machines by Dr. B.S. Pabla. The full list is in the Complete Syllabus section above.

How can I download the syllabus PDF?
The PDF is free to download — use the download links in the Download section below (English and Hindi versions). It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Computer Aided Design & Manufacturing

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Computer Aided Design & Manufacturing Syllabus PDF

Download the complete Computer Aided Design & Manufacturing syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Computer Aided Design & Manufacturing Syllabus PDF (English)

Source: BTEUP IRDT Kanpur NEP-2020 curriculum for Diploma in Mechanical Engineering (Production), effective session 2026-27, approved by the Board of Technical Education U.P. Lucknow in the C.D.C. meeting held on 16.07.2026 (urise.up.gov.in). Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →