Computer Aided Machine Drawing Practice — What This Subject Is About
Every machine part starts life as a drawing — and this subject teaches you to make drawings a workshop can actually build from. Computer Aided Machine Drawing Practice is a practicum: one lecture and six practical periods a week. You learn sectional views and GD&T, draw machine components by hand with dimensions and a bill of materials, and then rebuild the same assemblies on a computer — 2D drafting first, then solid modelling — finishing with a printout.
The subject carries 100 marks and 4 credits: 60 marks internal and 40 marks external (3 hours). It is subject 3.6 in the official IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering, effective session 2025-26. The syllabus totals 98 periods. One rule matters more than any other here: all exercise drawing sheets must be submitted for the model and end-semester examination as a record of work done — your sheets are your evidence.
Subject 3.6 (Practicum) • Total 100 Marks • 4 Credits • L 1 – P 6 • 3rd Semester — Mechanical Engineering • Session 2026–27

What the Subject Aims To Do
To teach the language of machine drawing — how a real machine component is shown on paper so that it can be made in a workshop. You learn to read and draw sectional views, to specify sizes and tolerances the way industry does (GD&T), to draw assembled views of machine components by hand with dimensions and a bill of materials, and then to do the same work on a computer: 2D drafting and solid modelling with CAD software, finishing with a printout of the assembled model.
Syllabus Contents — 98 Periods
| Section | Periods |
|---|---|
| Sectional Views | 24 |
| Geometric Dimensioning and Tolerances (GD&T) | —* |
| Manual Drawing Practice | 24 |
| Computer Aided Drafting (CAD) Practices — Part A: 2D Drafting | 24 |
| Computer Aided Drafting (CAD) Practices — Part B: Solid Modelling | 26 |
| Total | 98 |
*The GD&T section carries no separate period figure in the official syllabus; the printed section figures add to the stated total of 98 periods. Reproduced as printed.
Sectional Views (24 Periods)
Sectioning; sectional views; representation of the sectional plane; hatching — inclination, spacing, hatching large areas, hatching adjacent parts; full section / half section — types of half sections; conventional representation of materials in section. In simple words: how to "cut" a part on paper so its hidden inside can be seen and dimensioned — the section lines, the hatching patterns, and the difference between a full and a half section.
Geometric Dimensioning and Tolerances (GD&T)
Importance of GD&T; tolerance specification and interpretation; tolerance symbols; features; datum plane and axis; shaft basis and hole basis system; material condition modifiers; Maximum Material Condition (MMC); Least Material Condition (LMC); feature control frames. In simple words: the standard symbols that tell a machinist exactly how much variation is allowed on every size and shape — without them, two workshops would make two different parts from the same drawing.
Manual Drawing Practice (24 Periods)
Detailed drawings of machine components are given to students, who draw the assembled views: only the assembled front view (without section / full section / half section) and the top view or side view (without section / full section / half section), with dimensions and a bill of materials on the drawing sheet. Note: all the exercise drawing sheets should be submitted for the model and end-semester examination as a record of work done.
Computer Aided Drafting (CAD) Practices
Part A — Drafting Practices (2D), 24 periods: 2D drafting practice — draw the front view of the assembled drawing of the components, with dimensions.
Part B — Solid Modelling Practices, 26 periods: detailed drawings of the machine components are given to students, who create the solid modelling and assemble them using any CAD software on the computer and take the printout. Note: the syllabus prescribes no single CAD software — "any CAD software" is the official wording. Use whichever CAD package your polytechnic teaches.
Machine Components for the Practical Exercises
- Sleeve and Cotter Joint
- Plummer Block
- Flange Coupling
- Bushed Bearing
Detailed drawings of these four components are given for both the manual drawing practice and the CAD practices.
Complete Syllabus
The full examination scheme and the reference books from the official syllabus.
Examination Scheme
| Code | Paper | Type | L – P | Credits | Internal | External | Total |
|---|---|---|---|---|---|---|---|
| 3.6 | Computer Aided Machine Drawing Practice | Practicum | 1 – 6 | 4 | 60 | 40 (3 hrs) | 100 |
| Machine Drawing Practice Total | 4 | 60 | 40 | 100 | |||
Text and Reference Books (as listed in the syllabus)
- A Beginner's Guide to 3D Modeling — Cameron Coward.
- SolidWorks 2022 Step by Step Guide — Amit Bhatt and Mark Wiley.
- Web-based / online resources listed in the syllabus: AutoCAD tutorials (autodesk.in), mycadsite.com tutorials, NPTEL lectures.
How to Prepare
Drawing is a hand skill — it improves only by drawing. Practise sectional views until hatching and section selection feel automatic, learn the GD&T symbols and the shaft/hole basis systems well enough to read them on any drawing, and complete every exercise sheet on time: the sheets themselves are your record of work for the model and end-semester examination. In the CAD lab, build each of the four components as a solid model and assemble it — the printout is part of the work, not an afterthought. Keep the 60 internal marks in mind: they reward steady practical work through the semester, not a last-week rush. The official syllabus gives no marks-distribution table for the sections of this subject, so no section-wise marks split is claimed here.
Frequently Asked Questions
Is Computer Aided Machine Drawing Practice a theory subject or a practical subject?
It is a practicum (subject 3.6, L 1 – P 6): one lecture and six practical periods a week. Assessment is 60 marks internal and a 40-mark external examination of 3 hours.
How many marks and credits is it worth?
100 marks in total and 4 credits: internal 60, external 40.
Which machine components do students draw?
Four: Sleeve and Cotter Joint, Plummer Block, Flange Coupling and Bushed Bearing — drawn by hand as assembled views, then in CAD as 2D drafting and solid modelling.
Which CAD software should I learn?
The syllabus says "any CAD software" — no single package is prescribed. Learn whichever CAD package your polytechnic teaches (the syllabus's own book list mentions SolidWorks, and its online resources point to AutoCAD tutorials).
Do I have to submit my drawing sheets?
Yes. The syllabus states that all the exercise drawing sheets should be submitted for the model and end-semester examination as a record of work done. Keep every sheet safe and complete.
Are there notes, a question bank or a practice set for this subject?
No — this is a practical subject, so theory exam-prep material does not apply to it. The syllabus PDF below (English and Hindi) is the complete reference.
How can I download the Computer Aided Machine Drawing Practice syllabus PDF?
The syllabus PDF is free to download — use the download links in the Download section below (English and Hindi versions). It is prepared by KAMALDNP from the official BTEUP syllabus.
Related Syllabus Posts
- Workshop Practice — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- Advance Skill Development / Open Elective-I — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- Summer Internship-I — BTEUP Mechanical 3rd Semester Syllabus 2026-27
Download the Computer Aided Machine Drawing Practice Syllabus PDF
Download the complete Computer Aided Machine Drawing Practice syllabus PDF below — prepared by KAMALDNP, with the full section-wise topic list, the four machine components and reference books.
Download the Computer Aided Machine Drawing Practice Syllabus PDF (English)
Download the Computer Aided Machine Drawing Practice Syllabus PDF (Hindi)
Source: BTEUP IRDT Kanpur NEP-2020 curriculum for Diploma in Mechanical Engineering (Automobile), effective session 2025-26 (urise.up.gov.in). Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!