SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Electrical Testing and Commissioning — BTEUP Electrical 5th Semester Syllabus 2026-27

KAMALDNP Admin
October 26, 2026
7 Min Read
Electrical Testing and Commissioning — BTEUP Electrical 5th Semester Syllabus 2026-27

Electrical Testing and Commissioning — यह विषय किस बारे में है

कोई भी electrical machine या installation असली उपयोग के लिए चालू करने से पहले उसकी जाँच होनी चाहिए — और किसी को यह ज़िम्मेदारी लेनी होती है कि उसे चलाना सुरक्षित है। यही commissioning है। यह विषय आपको electrical equipment की testing और commissioning में standard safety procedures अपनाना सिखाता है। यह Program Elective-4, Option 1 है: आप यह विषय या Illumination Practices, इनमें से एक चुनते हैं।

पाँचों units उसी क्रम में हैं जिस क्रम में असली काम होता है: पहले electrical safety और insulation, फिर installation और erection (machinery की foundation सहित), फिर testing और commissioning, फिर troubleshooting plans, और अंत में maintenance। Maintenance का weightage सबसे ज़्यादा है — 25%। Practicum विषय (L 1 – P 4) होने के कारण इसमें 12 practicals हैं, इसलिए आप procedures को करके सीखते हैं।

Subject 5.4.1 (Program Elective-4, Practicum) • Total 100 Marks • 3 Credits • L 1 – P 4 • Choose this OR Illumination Practices • 5thवाँ सेमेस्टर — Electrical Engineering • सत्र 2026–27

Flow diagram of the sequence of tests done before commissioning an electrical installation
नई इंस्टॉलेशन को चालू करने से पहले वह तय क्रम की जाँचों से गुजरती है — इंसुलेशन, अर्थिंग और कंटीन्यूटी एक-एक करके देखे जाते हैं।

आप क्या पढ़ेंगे

Unit – I: Electrical Safety and Insulation (03 Periods, 20%)

Do's and don'ts regarding safety in domestic electrical appliances as well for substation/ power station operators; Electrical safety in industry/power stations/ substations at the time of operation/ control/ maintenance; Fire detection alarm, fire-fighting equipment's, measuring insulation resistance by different methods such as i) Polarization, ii) Dielectric absorption, iii) Megger and to predict the condition of insulation; Reconditioning of insulation, insulating oil - properties of insulating oil, causes of deterioration of oil.

Unit – II: Installation & Erection Concept of foundation for installation of machinery (02 Periods, 15%)

Requirements of foundation for static and rotating electrical machinery; Concept of leveling and aligning; Procedure for leveling and aligning alignment of direct coupled drive, effects of mis-alignment; Installation of transformer and procedure of installation of transformer, Requirements of installation of pole mounted transformer; Devices and tools required for loading, unloading, lifting, and carrying heavy equipment and precautions to be taken while handling them.

Unit – III: Testing and Commissioning (03 Periods, 20%)

Concept of testing and Objective of testing; Roles of I.S.S. in testing of electrical equipment, Types of tests and concepts: Routine tests, supplementary test, special tests, Methods of testing - Direct/Indirect/Regenerative testing; Tolerances for the various items for equipment – transformer, induction motor, dc motor, synchronous machines; Commissioning, Tests before Commissioning for transformer, induction motor, alternator; Testing of three-phase Induction motor as per I.S.325; Testing of single-phase induction motor; Testing of synchronous machines and D.C. machines.

Unit – IV: Troubleshooting Plans (03 Periods, 20%)

Internal and external causes for failure / abnormal operation of equipment; List of mechanical faults, electrical faults and magnetic faults in the electrical equipment remedies, applications; Use of tools like bearing puller filler gauges, dial indicator; Common troubles in electrical equipments and machines; Preparation of trouble shooting charts for D.C. Machines, AC Machines and transformers.

Unit – V: Maintenance (03 Periods, 25%)

Concept of maintenance, types of maintenance, Routine, preventive and breakdown maintenance; Causes of failure of electrical machines; Preventive maintenance - procedure or developing maintenance schedules for electrical machines; Factors affecting preventive maintenance schedule: (a) Distribution transformer, (b) Single phase and three phase Induction motors, (c) Batteries.

प्रैक्टिकल कार्य

  • Unit I — Determine breakdown strength of transformer oil.
  • Unit I — Perform insulation resistance test on any one motor/transformer using Megger.
  • Unit II — Evaluating the parts of an Alternator and testing an assembled alternator same on a test bench for proper operation.
  • Unit II — Evaluating the parts of a Transformer assembled Transformer same on a test bench for proper operation.
  • Unit III — Find regulation and efficiency of single-phase transformer by direct loading and back-to-back connection method and compare the results.
  • Unit III — Determine efficiency of D.C. machine by Swinburne's test.

और भी हैं — 12 प्रैक्टिकल्स की पूरी सूची PDF के अंदर है।

पूरा सिलेबस

आधिकारिक सिलेबस से पूरी परीक्षा योजना, प्रैक्टिकल्स की पूरी सूची और संदर्भ पुस्तकें। यूनिट-वार विषय ऊपर "आप क्या पढ़ेंगे" वाले भाग में हैं।

परीक्षा योजना

कोड पेपर प्रकार L – P क्रेडिट आंतरिक बाह्य कुल
5.4 Program Elective-4: Electrical Testing and Commissioning Practicum 1 – 4 3 60 40 (3 hrs) 100
Electrical Testing and Commissioning Total 3 60 40 100

यूनिट्स एक नज़र में

यूनिट विषय पीरियड अंकों का हिस्सा
I Electrical Safety and Insulation 03 20%
II Installation & Erection Concept of foundation for installation of machinery 02 15%
III Testing and Commissioning 03 20%
IV Troubleshooting Plans 03 20%
V Maintenance 03 25%

प्रैक्टिकल्स की पूरी सूची

यह आधिकारिक सिलेबस से प्रैक्टिकल्स की पूरी सूची है।

  • Unit I — Determine breakdown strength of transformer oil.
  • Unit I — Perform insulation resistance test on any one motor/transformer using Megger.
  • Unit II — Evaluating the parts of an Alternator and testing an assembled alternator same on a test bench for proper operation.
  • Unit II — Evaluating the parts of a Transformer assembled Transformer same on a test bench for proper operation.
  • Unit III — Find regulation and efficiency of single-phase transformer by direct loading and back-to-back connection method and compare the results.
  • Unit III — Determine efficiency of D.C. machine by Swinburne's test.
  • Unit III — Determine efficiency of D.C. machine by Hopkinson's test.
  • Unit IV — Prepare trouble shooting charts for electrical machines such as Transformer, D.C. machines, Induction motor, and Synchronous machines.
  • Unit IV — Use of tools like bearing puller, filler gauges, dial indicator.
  • Unit V — Prepare the preventive maintenance schedule of Distribution transformer.
  • Unit V — Prepare the preventive maintenance schedule of induction motor.
  • Unit V — Prepare the preventive maintenance schedule of batteries.

संदर्भ पुस्तकें

सिलेबस में दी गई सूची के अनुसार:

  • Deshpande, M. V. PHI Learning Pvt. Ltd., 2010, Design and Testing of Electrical Machines ISBN No 8120336453, 9788120336452
  • Rao, B V S Asia Club House, First Reprint, 2011, Operation and Maintenance of Electrical Equipment Vol-I, ISBN No 8185099022
  • Rosenberg. Mc GRAW-HILL, 1st Edition, May 2003, Maintenance and Repairs, ISBN No 9780071396035
  • Sharotri, S.K. Glencoe/ Mcgraw-Hill; 2nd Edition, June 1969; Preventive Maintenance of Electrical Apparatus, ISBN No 10: 007030839X 13: 978-0070308398

अक्सर पूछे जाने वाले प्रश्न

5thवें सेमेस्टर में Electrical Testing and Commissioning कितने अंकों का है?
कुल 100 अंक, 3 क्रेडिट। Practicum विषय (L 1 – 4): आंतरिक 60, बाह्य 40 (3 hrs)।

Electrical Testing and Commissioning में सबसे ज़्यादा भार वाली unit कौन सी है?
Maintenance, 25% (03 पीरियड)।

Electrical Testing and Commissioning में कितने practicals हैं?
12 practicals — पूरी सूची ऊपर पूरा सिलेबस वाले भाग में है, और PDF में भी है।

Electrical Testing and Commissioning के लिए कौन सी किताबें पढ़नी चाहिए?
आधिकारिक सिलेबस में 4 संदर्भ पुस्तकें सूचीबद्ध हैं — पूरी सूची ऊपर पूरा सिलेबस वाले भाग में है।

Electrical Testing and Commissioning सिलेबस PDF कैसे डाउनलोड करूँ?
PDF मुफ़्त डाउनलोड के लिए है — नीचे Download वाले भाग में दिए गए लिंक का उपयोग करें। यह KAMALDNP द्वारा आधिकारिक BTEUP सिलेबस से तैयार किया गया है।

मुझे Electrical Testing and Commissioning चुनना चाहिए या Illumination Practices?
दोनों Program Elective-4 (5.4) के दो विकल्प हैं — आप इनमें से एक चुनते हैं। यह विषय electrical equipment की safety, insulation, installation और erection, testing और commissioning, troubleshooting और maintenance के बारे में है। अपने polytechnic से पूछें कि वहाँ कौन सा विकल्प पढ़ाया जाता है।

संबंधित सिलेबस पोस्ट

Electrical Testing and Commissioning सिलेबस PDF डाउनलोड करें

नीचे Electrical Testing and Commissioning का पूरा सिलेबस PDF डाउनलोड करें — KAMALDNP द्वारा तैयार, जिसमें विषयों की पूरी सूची, प्रैक्टिकल्स और संदर्भ पुस्तकें हैं।

 

Electrical Testing and Commissioning सिलेबस PDF डाउनलोड करें

स्रोत: BTEUP 3rd Year Electrical Engineering curriculum (folder2627), C.D.C. की 16.07.2026 को हुई बैठक में स्वीकृत। विषय-सूचियाँ आधिकारिक सिलेबस के अनुसार हैं; छोटे स्पष्टीकरण लेखक के अपने सरल हिंदी सारांश हैं, सिलेबस का मूल पाठ नहीं। अपने पॉलिटेक्निक में किसी भी स्थानीय बदलाव की पुष्टि अवश्य करें।

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →