SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Fluid Mechanics & Hydraulic Machinery Lab — BTEUP Mechanical 3rd Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
8 Min Read
Fluid Mechanics & Hydraulic Machinery Lab — BTEUP Mechanical 3rd Semester Syllabus 2026-27

Fluid Mechanics & Hydraulic Machinery Lab — What This Practical Is About

In the theory paper you read that pressure falls where velocity rises, that a venturi meter measures discharge, and that a Pelton wheel turns water into work. In this lab you prove all of it with your own hands. You will measure pressure heads with a piezometer and manometers, find the coefficient of discharge of a venturi meter, an orifice meter and a V-notch, verify Bernoulli's theorem, measure pipe friction, trace the hydraulic circuits of a car brake and a hydraulic ram, and study a Pelton wheel, a Francis turbine and a single-stage centrifugal pump.

It is the third subject of the Mechanical 3rd semester and the practical partner of the Fluid Mechanics & Hydraulic Machinery theory paper (subject 3.2). The lab runs 4 periods a week and carries 100 marks: 60 internal (your regular lab work, records and viva through the semester) and 40 external in a 3-hour practical examination. The 12 experiments follow the theory units in order — pressure measurement first, then flow measurement and Bernoulli's theorem, then hydraulic machines — so each experiment confirms a result you have already studied on paper.

Subject 3.3 (Practical) • Total 100 Marks • 2 Credits • L 0 – P 4 • 3rd Semester — Mechanical Engineering • Session 2026–27

Fluid mechanics laboratory — venturi meter, manometers and a centrifugal pump test rig
Measure it yourself: pressure heads, discharge, friction loss, turbines and pumps.

The 12 Experiments

The complete list of practicals from the official syllabus, in the official order:

  1. Measurement of pressure head by employing (i) Piezometer tube, (ii) Single and double column manometer. Matches theory Unit 2 — pressure measurement.
  2. To verify Archimedes' Principle. Weigh a body in air and in water; the loss of weight equals the weight of the water displaced.
  3. To find out the value of coefficient of discharge for a venturi meter. Measurement of flow by using venturi meter. Matches theory Unit 3 — Cd is about 0.98 for a venturi meter.
  4. To find out the value of coefficient of discharge for an orifice meter. Measurement of flow by using orifice meter. Compare it with the venturi meter — the orifice meter's Cd is much lower, about 0.61.
  5. To find out the value of coefficient of discharge for V-notch. A V-notch (triangular weir) measures small discharges in an open channel.
  6. Verification of Bernoulli's theorem. Measure pressure head and velocity head at several sections of a converging-diverging duct and show the total head stays constant.
  7. To find coefficient of friction for a pipe (Darcy's friction). Matches theory Unit 3 — head loss grows with the square of the velocity.
  8. To study hydraulic circuit of an automobile brake. Matches theory Unit 5 — Pascal's law in a real car brake.
  9. To study hydraulic circuit of a hydraulic ram. Matches theory Unit 5 — a pump that lifts water with no external power.
  10. To study the working of a Pelton wheel Turbine. Matches theory Unit 4 — the impulse turbine for high heads.
  11. To study the working of a Francis turbine. Matches theory Unit 4 — the reaction turbine for medium heads.
  12. To study a single stage centrifugal pump for constructional details and its operation to find out its normal head and discharge. Matches theory Unit 4 — impeller, casing, priming and performance.

How to Prepare for the Practical Exam

Keep your lab record complete and up to date. The internal 60 marks cover your regular lab work, and a neat, complete record with aim, apparatus, theory, observations, calculations, result and precautions for every experiment is the simplest way to secure them. Write each experiment the same week you perform it — a record written from memory at the end of the semester shows.

Know the formula and the expected value for each experiment. Before the external exam, revise one line per experiment: what is measured, which formula is used, and what value to expect. Venturi Cd ≈ 0.98, orifice Cd ≈ 0.61, Bernoulli's total head constant, Darcy's hf = fLV²/(2gd). The examiner's first viva question is usually "what did you find, and is it the value you expected?"

Practise the two study-type experiments as viva answers. Experiments 8–12 are study experiments — there is no reading to take, only a working to explain. Prepare a five-line explanation with a labelled sketch for each: the brake circuit, the ram circuit, the Pelton wheel, the Francis turbine and the centrifugal pump. These are also theory questions, so the same preparation serves both papers.

Revise the matching theory unit with each experiment. The lab and the theory paper share their topics: manometers with Unit 2, venturi and orifice meters with Unit 3, turbines and pumps with Unit 4, brake and ram circuits with Unit 5. Revising them together fixes both — and the viva often crosses from the experiment into the theory behind it.

Exam Tips

  • The external exam is 3 hours for 40 marks — you will usually perform one experiment and face a viva on the whole list. Budget your time: set up, take readings, calculate, and leave time to write the result neatly.
  • Take at least three sets of readings wherever the experiment allows it, and average them. A single reading with no repeat is the most common reason for a wrong result.
  • Check units before you calculate. Manometer readings in mm of mercury, pipe diameters in mm, time in seconds — convert everything to metres and seconds first, exactly as in the theory numericals.
  • State the result with its unit and a one-line conclusion. "Cd of the venturi meter = 0.97" is a result; "Cd = 0.97, which agrees with the expected value of about 0.98" is a finished answer.
  • For the viva, prepare the "why" of each experiment, not just the "how". Why is the venturi meter more accurate than the orifice meter? Why does a centrifugal pump need priming? Why is the Pelton wheel not fitted with a draft tube? These are the questions examiners ask.
  • Keep safety in mind: check that couplings and belts are guarded before starting a pump or turbine rig, mop up spilled water at once, and never put a hand near a running runner or impeller.

Complete Syllabus

The full examination scheme from the official syllabus.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
3.3Fluid Mechanics & Hydraulic Machinery LabPractical0 – 42Practical 60Practical 40 (3 hrs)100
Fluid Mechanics & Hydraulic Machinery Lab Total26040100

Reference Books

Reference books are not listed separately for this lab in the official syllabus. The reference books listed for the theory paper (subject 3.2, Fluid Mechanics & Hydraulic Machinery) cover the same topics and are the books to use for this lab — see the theory post for the full list of 9 books.

Frequently Asked Questions

How many experiments are there in the Fluid Mechanics Lab?
12 experiments, listed in full in the “The 12 Experiments” section above.

How many marks is the Fluid Mechanics Lab worth?
100 marks in total and 2 credits: internal 60 and external practical 40 in 3 hours.

Is there a separate theory exam for the lab?
No — the lab is assessed by practical work and viva. The theory of the same topics is examined in the separate theory paper, Fluid Mechanics & Hydraulic Machinery (subject 3.2), which carries 60 external marks.

Which experiments are most important for the external exam?
All 12 are examinable, but the measurement experiments — venturi meter, orifice meter, V-notch, Bernoulli's theorem and pipe friction — are the ones most often set as the performed experiment, because they give readings to take and a result to calculate. The study experiments (brake, ram, turbines, pump) are most often asked in the viva.

What should I write in the lab record for a study experiment?
Aim, a labelled sketch of the machine or circuit, its construction, its working in steps, and its applications — the same five lines you would write for the matching theory question.

How can I download the Fluid Mechanics Lab syllabus PDF?
Use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Download the Fluid Mechanics & Hydraulic Machinery Lab Syllabus PDF

Download the complete Fluid Mechanics & Hydraulic Machinery Lab syllabus PDF below — prepared by KAMALDNP, with the full experiments list and the examination scheme.

Download the Fluid Mechanics & Hydraulic Machinery Lab Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Automobile), effective session 2025-26 (urise.up.gov.in). The same 3rd-semester list applies across Mechanical Automobile, Production and Refrigeration & AC. Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →