SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Minor Project — BTEUP Mechanical 5th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
7 Min Read
Minor Project — BTEUP Mechanical 5th Semester Syllabus 2026-27

Minor Project — What This Subject Is About

Minor Project is where the diploma stops asking you to answer questions and starts asking you to build something. For eight practical periods a week, you work in a group of four to five students, guided by a teacher, and you design and build a working project — a solar-powered water pump, a hydraulic scissor lift, a go-kart, a mini wind turbine. It is the first project of the diploma, and it matters twice: the project you select in the 5th semester will be continued in the 6th semester as your Major Project.

Assessment is 100 marks and 4 credits: 60 marks internal (attendance and punctuality 10, synopsis 25, state of the art through PPT 25) and 40 marks external (3-hour practical examination). There is no theory paper. The synopsis and the presentation together are 50 of the 60 internal marks — the written and spoken work matters as much as the build.

The mistake students make most often: choosing a project that is impressive on paper and impossible in the workshop. Pick a project your group can actually build with the tools, materials and time you have — and one you can extend in the 6th semester, because you will have to.

Subject 5.4 (Practical) • Total 100 Marks • 4 Credits • L 0 – P 8 • 5th Semester — Mechanical Engineering (Production) • Session 2026–27

Note: There is no theory paper for this subject — and no Notes, Question Bank or Practice Set applies to it. The free syllabus PDF below is the complete reference. The project you select in the 5th semester will be continued in the 6th semester as your Major Project — so choose a project you can grow, not one you can only finish.
Minor Project syllabus — build a working project in a team, BTEUP Mechanical 5th semester 2026-27
Eight practical periods a week, one working project, and a team of four or five — the project you start here becomes your Major Project.

What This Subject Involves

Learning Outcomes

After undergoing this subject, the student will be able to: use effectively oral, written and visual communication; demonstrate skill and knowledge of current technological tools and techniques specific to the professional field of study; identify, analyse and solve problems creatively through sustained critical investigation; develop leadership abilities; apply fundamental and disciplinary concepts and methods in ways appropriate to their areas of study.

Communication, current tools, creative problem-solving, leadership, and applying what you have learned — the five outcomes the project is judged against.

Why Minor Projects Matter

Application of knowledge: applying theoretical concepts to practical, real-world problems. Skill development: problem-solving, critical thinking, teamwork, and project management. Hands-on experience: tools, materials, and technologies used in mechanical engineering. Innovation and creativity: thinking creatively and coming up with innovative solutions. Career preparation: demonstrating initiative, independent work, and completed tasks. Industry standards: familiarity with industry standards and practices. Networking: building networks with peers, faculty, and industry professionals.

Seven reasons, and the honest one is the fifth: a finished project is the first thing you can show an employer that is not a marksheet.

Suggested List of Minor Projects (10)

1. Solar-Powered Water Pump. 2. Automatic Pneumatic Bumper System. 3. Fabrication of Seed Sowing Machine. 4. Electricity Generation from Speed Breakers. 5. Hydraulic Scissor Lift. 6. Solar-Powered Air Conditioning System. 7. Automatic Side Stand Retrieving System for Two-Wheelers. 8. Fabrication of a Mini Wind Turbine. 9. Design and Fabrication of a Go-Kart. 10. Water Purification System Using Solar Energy. Each student studies the operations at site and prepares a detailed project report of the observations, processes and activities. Each teacher may guide a group of 4 to 5 students.

Ten ideas from the syllabus — solar, pneumatic, hydraulic, wind and vehicle projects. Your guide can help you identify your project and check your plan of action in advance.

How Minor Project Is Marked

Internal assessment, 60 marks: attendance and punctuality 10, synopsis 25, state of the art through PPT 25. The teachers, along with field supervisors/engineers, conduct the performance assessment. The external practical examination carries 40 marks (3 hours).

The synopsis and the presentation are 50 of the 60 internal marks. The build matters, but the written and spoken work decides most of the internal score.

Complete Syllabus

The full examination scheme for this subject. The internal marking criteria are in the “How Minor Project Is Marked” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
5.4Minor ProjectPractical0 – 84Practical 60Practical 40 (3 hrs)100
Minor Project Total46040100

How to Prepare for Minor Project

Pick your project early — and pick it for two semesters. The project you select in the 5th semester continues into the 6th, so choose one your group can actually build and extend.

Write a tight synopsis (25 marks). What you will build, why it matters, how you will build it, what it will cost — in short, clear sections. A vague synopsis scores low.

Prepare the state-of-the-art presentation (25 marks) properly. What already exists, what is wrong with it, what your project does differently — with pictures, not just text.

Attend every practical session. Attendance and punctuality are 10 marks, and your guide notices who shows up.

Build your report as you go. Keep a site diary and write the detailed project report alongside the build, not in the last week.

Project Tips

  • Buildable beats impressive. A working solar pump beats an unfinished go-kart. Choose what your group can finish.
  • The synopsis and presentation are 50 of 60 internal marks. Do not spend all your time building and none writing.
  • Divide the work, but share the knowledge. In the viva, every member can be asked about any part of the project.
  • Keep the receipts and the diary. Materials bought, work done, problems met — the report needs them all.
  • Think about the 6th semester now. What will you add to this project next semester? If the answer is nothing, pick a different project.

Frequently Asked Questions

How is Minor Project marked?
100 marks and 4 credits: 60 marks internal (attendance and punctuality 10, synopsis 25, state of the art through PPT 25) and 40 marks external (3-hour practical examination). There is no theory paper.

How many students are in a Minor Project group?
Each teacher may guide a group of 4 to 5 students.

Does the Minor Project continue into the 6th semester?
Yes. The curriculum states: the project selected in the 5th semester will be continued in the 6th semester as the Major Project (subject 6.1, 400 marks, 12 credits). Choose a project you can grow.

What projects does the syllabus suggest?
Ten: solar-powered water pump, automatic pneumatic bumper system, seed sowing machine, electricity generation from speed breakers, hydraulic scissor lift, solar-powered air conditioning system, automatic side stand retrieving system for two-wheelers, mini wind turbine, go-kart, and solar water purification system. The full list with descriptions is in the syllabus PDF.

Are there notes, a question bank or a practice set for this subject?
No — Minor Project is practical project work, so theory exam-prep material does not apply to it. The syllabus PDF below (English and Hindi) is the complete reference.

How can I download the Minor Project syllabus PDF?
The PDF is free to download — use the download links in the Download section below (English and Hindi versions). It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Download the Minor Project Syllabus PDF

Download the complete Minor Project syllabus PDF below — prepared by KAMALDNP, with the learning outcomes, the 10 suggested projects, the marking criteria and preparation guidance.

Download the Minor Project Syllabus PDF (English)

Source: BTEUP IRDT Kanpur NEP-2020 curriculum for Diploma in Mechanical Engineering (Production), effective session 2026-27, approved by the Board of Technical Education U.P. Lucknow in the C.D.C. meeting held on 16.07.2026 (urise.up.gov.in). Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →