Non-Destructive Testing — What This Subject Is About
A crack inside a weld can bring down an aircraft, and the only way to find it without cutting the part open is non-destructive testing. NDT is the subject that teaches those methods: looking, penetrating liquids, magnetic particles, eddy currents, ultrasound and X-rays, six ways to see inside a part and leave it whole. It is the most method-by-method paper of the 6th semester. Every method is asked the same way: principle, procedure, advantages, limitations.
The subject covers five units in 42 periods: the fundamentals of NDT; visual inspection and liquid penetrant testing; magnetic particle and eddy current testing; ultrasonic and radiographic testing; and advanced NDT techniques. The paper is a pure theory paper — 60 marks external in 3 hours, with 40 internal marks — and every unit carries the same 12 marks, so no unit can be skipped. The 6th semester is the even semester, so this paper is examined in the even-semester session.
Subject 6.4.3 (Theory) • Total 100 Marks • 3 Credits • L 3 – P 0 • 6th Semester — Mechanical Engineering (Production) • Session 2026–27

What You Will Study
Unit 1 — Introduction to NDT (6 Periods, 12 Marks)
Non-Destructive Testing (NDT) and comparison with Destructive Testing, defects/flaws due to: primary processing, secondary processing, in-service conditions, types of defects detected by NDT, common NDT techniques, advantages, limitations, and applications of NDT.
What non-destructive testing is, how it differs from destructive testing, and the defects it is meant to find.
Unit 2 — Visual Inspection and Liquid Penetrant Test (8 Periods, 12 Marks)
Principle of visual inspection, defects detectable by unaided visual inspection, optical aids used in visual inspection, advantages and limitations of visual inspection, advantages and limitations of LPT, physical principles of LPT, procedure for conducting LPT, penetrant methods, materials used in LPT.
The two simplest methods — looking carefully (visual inspection) and liquid penetrant testing — how they work and where they stop.
Unit 3 — Magnetic Particle Test and Eddy Current Test (10 Periods, 12 Marks)
Advantages and limitations of MPT, procedure for MPT, magnetizing techniques, magnetic particles and suspending liquids, detectable discontinuities, non-relevant indications, applications, advantages and limitations of ECT, operating variables, eddy current instrumentation, reference standards, applications.
Magnetic particle testing and eddy current testing — the principles, the instruments, and what each one can and cannot find.
Unit 4 — Ultrasonic Test and Radiography Test (10 Periods, 12 Marks)
Advantages and limitations of UT, general characteristics of ultrasonic waves, wave propagation and types of ultrasonic waves, major variables in UT, angle beam techniques, immersion testing, applications, uses and applicability of RT, advantages and limitations of RT, interaction between penetrating radiation and matter (attenuation), image conversion media, film radiography, real-time radiography.
Ultrasonic testing and radiographic testing — sound waves and penetrating radiation used to see inside a part.
Unit 5 — Other NDT Techniques (8 Periods, 12 Marks)
Acoustic emission inspection, microwave inspection, thermal inspection, electromagnetic techniques for residual stress measurements, optical holography.
The advanced methods — acoustic emission, microwave, thermal inspection, residual stress measurement and optical holography.
Complete Syllabus
The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.
Examination Scheme
| Code | Paper | Type | L – P | Credits | Internal | External | Total |
|---|---|---|---|---|---|---|---|
| 6.4.3 | Non-Destructive Testing | Theory | 3 – 0 | 3 | Theory 40 | Theory 60 (3 hrs) | 100 |
| Non-Destructive Testing Total | 3 | 40 | 60 | 100 | |||
Units at a Glance
| Unit | Topic | Periods | Marks |
|---|---|---|---|
| 1 | Introduction to NDT | 6 | 12 |
| 2 | Visual Inspection and Liquid Penetrant Test | 8 | 12 |
| 3 | Magnetic Particle Test and Eddy Current Test | 10 | 12 |
| 4 | Ultrasonic Test and Radiography Test | 10 | 12 |
| 5 | Other NDT Techniques | 8 | 12 |
| Total | 42 | 60 | |
Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.
Reference Books
As listed in the syllabus:
- Non Destructive Evaluation and Quality Control, Metals Handbook, Vol. 17, 9th Ed., ASM, 1989.
- K. C. Srivastava, Handbook of Magnetic Particle Testing, Oscar Publications, 1998.
- B. Hull, Non Destructive Testing, Springer, 2012.
- Dr. V. Jayakumar, Dr. K. Elangovan, Non-Destructive Testing of Materials, Lakshmi Publications, Chennai, 2017.
- Baldev Raj, T. Jayakumar, M. Thavasimuthu, Practical Non-Destructive Testing, 3rd Ed., Narosa.
How to Prepare for Non-Destructive Testing
Learn every method in the same four-part format. Principle, procedure, advantages, limitations. That is how the syllabus lists every method from visual inspection to radiography, and that is how they are asked. One page per method, same headings.
Keep the methods apart with one line each. LPT finds surface cracks on non-porous materials; MPT finds surface and near-surface cracks in ferromagnetic materials; ECT finds surface cracks in conductors; UT finds internal flaws; RT sees inside with radiation. One line each prevents the commonest confusion in the paper.
Draw the set-ups. The penetrant steps, the magnetic-particle yoke, the eddy-current coil, the ultrasonic angle beam: a labelled sketch is worth more than a page of text for every one of them.
Learn the numbers. The unaided eye resolves about 0.1 mm, ultrasonic testing uses 0.5–15 MHz, angle beams are usually 45°, 60° or 70°. The paper's short questions are built on numbers like these.
Finish with the advanced unit. Acoustic emission, microwave, thermal inspection, residual stress and holography (Unit V) are five short topics, one line each: the easiest 12 marks in the paper.
Exam Tips
- Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered. Pick the two parts you know best in every question, and do not leave any question blank.
- Name the method in full first. Liquid Penetrant Testing, Magnetic Particle Testing, Ultrasonic Testing. Write the full name and the abbreviation together the first time.
- State what each method CANNOT do. Every method's limitations are asked as often as its advantages; a balanced answer names both.
- Answer 'compare NDT and destructive testing' as a table. The Unit I comparison is the paper's most predictable question, and a two-column table is the fastest full-marks answer.
- Use the defect names correctly. Crack, void, inclusion, porosity, lack of fusion: the paper's own vocabulary for what goes wrong inside a part.
- Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.
Frequently Asked Questions
How many marks is Non-Destructive Testing worth in the 6th semester?
100 marks in total and 3 credits: internal assessment 40 marks (theory) and external theory paper 60 marks in 3 hours.
Which units carry the most marks in Non-Destructive Testing?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Teaching time differs slightly: Unit 1 gets 6 periods; Unit 2 and Unit 5 get 8 periods each, and Unit 3 and Unit 4 get 10 periods each. The complete unit-wise table is in the Complete Syllabus section above.
Is Non-Destructive Testing a theory subject or a practical subject?
It is a pure theory subject (L–P 3 – 0, no practical hours).
What are the most scoring topics in Non-Destructive Testing?
The method descriptions, LPT from Unit II, MPT and ECT from Unit III, UT and RT from Unit IV, are the most scoring, because a labelled sketch with the procedure earns full marks. The NDT-vs-destructive comparison is the next best scorer. But since every unit carries 12 marks, no unit should be left out.
Which books should I refer to for Non-Destructive Testing?
The syllabus lists 5 references, including Non Destructive Testing by B. Hull and Practical Non-Destructive Testing by Baldev Raj and others, among others. The full list is in the Complete Syllabus section above.
Do I have to study Non-Destructive Testing, or can I choose another subject?
You choose. Non-Destructive Testing is one of the four Elective Specialization options in the 6th semester — a student picks any ONE of them. The other options are Green Energy & Engineering, Maintenance of Machine Tools and Product Design & Development.
How can I download the Non-Destructive Testing syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.
Related Syllabus Posts
- Entrepreneurship and Start-ups — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Advanced Engineering Mathematics — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Additive Manufacturing — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Project Management — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Finance Fundamentals — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Industry 4.0 — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Green Energy & Engineering — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Maintenance of Machine Tools — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Product Design & Development — BTEUP Mechanical 6th Semester Syllabus 2026-27
- Thermal Engineering-I — BTEUP Mechanical 3rd Semester Syllabus 2026-27
- All BTEUP Syllabus Posts — kamaldnp.com Blog
- KAMALDNP Books — Short Notes, Question Banks & Practice Sets
Notes, Question Bank & Practice Sets — Non-Destructive Testing
The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.
Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.
Buy / Download — My DownloadsOne original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.
Buy / Download — My Downloads10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)
Buy / Download — My DownloadsAlready purchased? You will find the Download button on the same My Downloads page — you will not be charged again.
Download the Non-Destructive Testing Syllabus PDF
Download the complete Non-Destructive Testing syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.
Download the Non-Destructive Testing Syllabus PDF
Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Production), updated and approved by the Board of Technical Education, U.P., Lucknow, in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-language summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!