SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Product Design & Development — BTEUP Mechanical 6th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
10 Min Read
Product Design & Development — BTEUP Mechanical 6th Semester Syllabus 2026-27

Product Design & Development — What This Subject Is About

Every product you use, the fan above you, the phone in your hand, was once a vague need in a customer's mind, and someone turned that need into drawings, a prototype, and a thing that sells. Product Design & Development is the subject that teaches that journey: the product life cycle, planning, customer needs, concepts and architecture, prototyping and economics. It is the most idea-to-market paper of the 6th semester, and the one where a worked example (a fan, a mixer, a bicycle) makes every answer concrete.

The subject covers five units in 42 periods: the product life cycle and the design process; product planning; identifying customer needs; concept development and architecture; and prototyping and economics. The paper is a pure theory paper — 60 marks external in 3 hours, with 40 internal marks — and every unit carries the same 12 marks, so no unit can be skipped. The 6th semester is the even semester, so this paper is examined in the even-semester session.

Subject 6.4.4 (Theory) • Total 100 Marks • 3 Credits • L 3 – P 0 • 6th Semester — Mechanical Engineering (Production) • Session 2026–27

Note: Product Design & Development is one of the four Elective Specialization options in the 6th semester — you pick any ONE of the four. The other options are Green Energy & Engineering, Maintenance of Machine Tools and Non-Destructive Testing. Whichever you pick, the paper is the same shape: 60 marks external in 3 hours, 40 internal.
Product Design & Development syllabus — product life cycle, planning and prototyping, BTEUP Mechanical 6th semester 2026-27
From a customer's need to a product that sells — Product Design & Development is the journey of an idea.

What You Will Study

Unit 1 — Introduction (6 Periods, 12 Marks)

Product life cycle, product policy of an organization, selection of a profitable product, product design process, new product strategy, idea generation, screening, concept development, testing, business analysis, product development testing and analysis, commercialization, collaboration, Gantt chart, product life-cycle management.

How a product lives and dies — the product life cycle, product policy, and the journey from idea to commercialisation.

Unit 2 — Product Planning (8 Periods, 12 Marks)

The product planning process, identify opportunities, evaluate and prioritize projects, allocate resources and plan timing, pre-project planning.

How opportunities are found, projects are chosen and ranked, and resources and timing are planned before a project starts.

Unit 3 — Identifying Customer Needs (10 Periods, 12 Marks)

Gather raw data from customers, interpret raw data in terms of customer needs, organize the needs into a hierarchy, establish the relative importance of the needs and reflect on the results and the process. Product specifications: what are specifications, when are specifications established, establishing target specifications, setting the final specifications.

How customer needs are found, organised and turned into product specifications with targets.

Unit 4 — Concept Generation (10 Periods, 12 Marks)

Product implications of the architecture, establishing the architecture, variety and supply chain considerations. Industrial design: assessing the need for industrial design, the impact of industrial design, industrial design process, managing the industrial design process, assessing the quality of industrial design.

How concepts are generated and chosen, how product architecture is set, and how industrial design and the design process are managed.

Unit 5 — Prototyping (8 Periods, 12 Marks)

Prototyping basics, principles of prototyping, technologies, planning for prototypes. Product development economics, elements of economic analysis, base case financial model, sensitivity analysis, project trade-offs, influence of qualitative factors on project success, qualitative analysis.

How prototypes are planned and used, what a product costs to develop, and how a project is analysed — qualitatively and quantitatively.

Complete Syllabus

The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
6.4.4Product Design & DevelopmentTheory3 – 03Theory 40Theory 60 (3 hrs)100
Product Design & Development Total34060100

Units at a Glance

UnitTopicPeriodsMarks
1Introduction612
2Product Planning812
3Identifying Customer Needs1012
4Concept Generation1012
5Prototyping812
Total4260

Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.

Reference Books

As listed in the syllabus:

  • Karl T. Ulrich, Steven D. Eppinger, Product Design & Development, Tata McGraw-Hill, New Delhi, 2003.
  • B. Hollins & S. Pugh, Successful Product Design, Butterworths, London.
  • J. G. Bralla, Handbook of Product Design for Manufacture, McGraw-Hill, New York.
  • A. K. Chitale and R. C. Gupta, Product Design and Manufacturing, 6th Edition, PHI, New Delhi, 2003.
  • G. Boothroyd, P. Dewhurst and W. Knight, Product Design for Manufacture and Assembly, 2nd Edition, Marcel Dekker, New York, 2002.

How to Prepare for Product Design & Development

Learn the design process as a chain. Idea generation, screening, concept development, testing, business analysis, commercialisation: the Unit I chain is asked in order. Learn it as a chain, and the Gantt chart that plans it.

Practise turning needs into specifications. Unit III is the heart of the paper: a customer says 'quiet fan', the engineer writes 'noise below 40 dB'. Practise the translation on a product you know until it is natural.

Keep the planning tools apart. Opportunity identification, project evaluation, resource allocation, pre-project planning: four steps of Unit II, each with its own job. One line each.

Learn the economics with the numbers. Break-even, sensitivity analysis, the base case: Unit V's quantitative analysis is the paper's only numerical ground, and a worked example (10,000 units at ₹500, profit zero at 8,000) earns full marks.

Collect one product example and reuse it. One product, a table fan, a mixer-grinder, carried through every unit (its life cycle, its plan, its needs, its concepts, its prototype) makes every answer concrete and consistent.

Exam Tips

  • Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered. Pick the two parts you know best in every question, and do not leave any question blank.
  • Answer with a product, not in the abstract. Every concept in this paper, life cycle, specification, concept, prototype, scores better attached to a named product than as a bare definition.
  • Draw the life-cycle curve. Introduction, growth, maturity, decline: a labelled curve with a one-line note per stage is the full-marks answer for the Unit I opener.
  • Use the specification format. Metric, unit, target value: 'air delivery, m³/min, 200'. The Unit III format, used correctly, shows you know the subject.
  • Answer 'concept generation vs concept selection' as two steps. Generating many ideas and selecting one are different jobs with different methods; the paper asks for both.
  • Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.

Frequently Asked Questions

How many marks is Product Design & Development worth in the 6th semester?
100 marks in total and 3 credits: internal assessment 40 marks (theory) and external theory paper 60 marks in 3 hours.

Which units carry the most marks in Product Design & Development?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Teaching time differs slightly: Unit 1 gets 6 periods; Unit 2 and Unit 5 get 8 periods each, and Unit 3 and Unit 4 get 10 periods each. The complete unit-wise table is in the Complete Syllabus section above.

Is Product Design & Development a theory subject or a practical subject?
It is a pure theory subject (L–P 3 – 0, no practical hours).

What are the most scoring topics in Product Design & Development?
The customer-needs-to-specifications answers from Unit III are the most scoring: a worked example with metrics and target values earns full marks. The life-cycle curve and the economics examples are the next best scorers. But since every unit carries 12 marks, no unit should be left out.

Which books should I refer to for Product Design & Development?
The syllabus lists 5 books, including Product Design & Development by Ulrich and Eppinger, among others. The full list is in the Complete Syllabus section above.

Do I have to study Product Design & Development, or can I choose another subject?
You choose. Product Design & Development is one of the four Elective Specialization options in the 6th semester — a student picks any ONE of them. The other options are Green Energy & Engineering, Maintenance of Machine Tools and Non-Destructive Testing.

How can I download the Product Design & Development syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Product Design & Development

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Product Design & Development Syllabus PDF

Download the complete Product Design & Development syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Product Design & Development Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Production), updated and approved by the Board of Technical Education, U.P., Lucknow, in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-language summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →