Project — What This Subject Is About
The Major Project is the biggest single subject in the diploma: 24 practical periods a week, 12 credits, 400 marks — more than half the 6th semester's total. It is also the most personal: the project selected in the 5th semester will be continued in the 6th semester, so the work you started as a Minor Project becomes the finished, working model you present at the end of your diploma.
Assessment is 240 marks internal and 160 marks external (3-hour practical examination). The internal marks are spread across the semester: attendance and punctuality 40, project progress Presentation-I 50, Presentation-II 50, project model and final presentation 90, report writing 60. There is no theory paper. The model and final presentation alone are worth 90 marks — the biggest single item in the whole diploma.
The 6th semester has two pathways, and the Project belongs to the Normal Pathway (A). The alternative Internship Pathway (B) replaces the Project with four months of industry training plus an industrial project and seminar. Choose your pathway with your HOD before the semester begins — you cannot switch halfway.
Subject 6.1 (Practical) • Total 400 Marks • 12 Credits • L 0 – P 24 • 6th Semester — Mechanical Engineering (Production) • Session 2026–27

What This Subject Involves
Learning Outcomes
After undergoing this subject, the student will be able to: use effectively oral, written and visual communication; demonstrate skill and knowledge of current technological tools and techniques specific to the professional field of study; identify, analyse and solve problems creatively through sustained critical investigation; develop leadership abilities; apply fundamental and disciplinary concepts and methods in ways appropriate to their areas of study.
The same five outcomes as the Minor Project, judged at a higher standard: this time the project must work, and the report must prove it.
Why Major Projects Matter
Application of knowledge: applying theoretical concepts to practical, real-world problems. Skill development: problem-solving, critical thinking, teamwork, and project management. Hands-on experience: tools, materials, and technologies used in mechanical engineering. Innovation and creativity: thinking creatively and coming up with innovative solutions. Career preparation: demonstrating initiative, independent work, and completed tasks. Industry standards: familiarity with industry standards and practices. Networking: building networks with peers, faculty, and industry professionals.
Seven reasons, and the honest one is the fifth: a finished Major Project is the first thing you can show an employer that is not a marksheet — and the last thing the diploma asks of you.
How Project Is Marked
Internal assessment, 240 marks: attendance and punctuality 40, project progress Presentation-I 50, project progress Presentation-II 50, project model & final presentation 90, report writing 60. The teachers, along with field supervisors/engineers, conduct the performance assessment. The external practical examination carries 160 marks (3 hours). Each student studies the operations at site and prepares a detailed project report of the observations, processes and activities. Each teacher may guide a group of 4 to 5 students.
Four milestones across the semester. The model and final presentation (90) are worth more than either progress presentation — the finished, working model is what the marks reward.
The 6th Semester — Two Pathways
Normal Pathway (A): Project (400 marks, 12 credits) + Entrepreneurship and Start-ups (100 marks, 2 credits, theory) + one Elective Pathway subject (100 marks, 3 credits: Advanced Engineering Mathematics, Additive Manufacturing, Project Management, Finance Fundamentals, or Industry 4.0) + one Elective Specialization subject (100 marks, 3 credits: Green Energy & Engineering, Maintenance of Machine Tools, Non-Destructive Testing, or Product Design & Development) + Student Centred Activities (50 marks). Total: 750 marks, 20 credits. Internship Pathway (B): Entrepreneurship and Start-ups online (100 marks) + Industry Hands-on Practice (350 marks) + Industrial Project (200 marks) + Seminar in institute (100 marks) = 750 marks. The industrial training tenure must not be less than 4 months, the industry must be registered with MSME / Directorate of Industries / a limited organisation / a State or Central Government establishment, and monthly progress reports must be attested and forwarded by the industrial supervisor. Students on this pathway do not take the Major Project.
Both pathways total 750 marks and 20 credits. Pathway A builds the project in the institute; Pathway B builds it in industry over four months.
Complete Syllabus
The full examination scheme for this subject. The internal marking criteria are in the “How Project Is Marked” section above.
Examination Scheme
| Code | Paper | Type | L – P | Credits | Internal | External | Total |
|---|---|---|---|---|---|---|---|
| 6.1 | Project | Practical | 0 – 24 | 12 | Practical 240 | Practical 160 (3 hrs) | 400 |
| Project Total | 12 | 240 | 160 | 400 | |||
How to Prepare for the Major Project
Do not begin from scratch. Your 5th-semester Minor Project is your starting point. Plan the 6th semester around extending it, not replacing it.
Plan around the four milestones. Presentation-I (50), Presentation-II (50), the model and final presentation (90, the biggest single item), and the report (60). Put dates on all four at the start of the semester.
The model matters most. A working model, presented well, is worth more than any other single item. Test it before the presentation, not during it.
Keep attendance up (40 marks). 24 periods a week is a lot of workshop time — and 40 marks ride on showing up for it.
Build the report as you go. A report written from a site diary reads very differently from one written in the last week.
Project Tips
- 90 marks ride on the model and final presentation. More than either progress presentation. The finished, working model is the whole point.
- Choose your pathway before the semester begins. Normal Pathway (A) builds the project in the institute; Internship Pathway (B) needs four months in a registered industry. You cannot switch halfway.
- Divide the work, but share the knowledge. In the viva, every member can be asked about any part of the project.
- Test the model before the presentation. A model that fails in front of the examiners costs more than marks — it costs the presentation.
- Keep the diary and the receipts. Materials bought, work done, problems met — the report needs them all.
Frequently Asked Questions
How is the Major Project marked?
400 marks and 12 credits: 240 marks internal (attendance and punctuality 40, Presentation-I 50, Presentation-II 50, model and final presentation 90, report writing 60) and 160 marks external (3-hour practical examination). There is no theory paper.
Does the Major Project continue from the Minor Project?
Yes. The curriculum states: the project selected in the 5th semester will be continued in the 6th semester. Your 5th-semester Minor Project is the starting point — do not begin from scratch.
How many students are in a Project group?
Each teacher may guide a group of 4 to 5 students.
What is the Internship Pathway (B) alternative?
Instead of the Major Project, you take Entrepreneurship and Start-ups online (100 marks) + Industry Hands-on Practice (350 marks) + Industrial Project (200 marks) + Seminar in institute (100 marks) = 750 marks. The industrial training tenure must not be less than 4 months, and the industry must be registered with MSME / Directorate of Industries / a limited organisation / a State or Central Government establishment. Both pathways total 750 marks and 20 credits.
Are there notes, a question bank or a practice set for this subject?
No — the Major Project is practical project work, so theory exam-prep material does not apply to it. The syllabus PDF below (English and Hindi) is the complete reference.
How can I download the Project syllabus PDF?
The PDF is free to download — use the download links in the Download section below (English and Hindi versions). It is prepared by KAMALDNP from the official BTEUP syllabus.
Related Syllabus Posts
- Minor Project — BTEUP Mechanical 5th Semester Syllabus 2026-27
- Summer Internship-II — BTEUP Mechanical 5th Semester Syllabus 2026-27
- All BTEUP Syllabus Posts — kamaldnp.com Blog
Download the Project Syllabus PDF
Download the complete Project syllabus PDF below — prepared by KAMALDNP, with the learning outcomes, the marking criteria, the two 6th-semester pathways and preparation guidance.
Download the Project Syllabus PDF (English)
Source: BTEUP IRDT Kanpur NEP-2020 curriculum for Diploma in Mechanical Engineering (Production), effective session 2026-27, approved by the Board of Technical Education U.P. Lucknow in the C.D.C. meeting held on 16.07.2026 (urise.up.gov.in). Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!