SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Thermal Engineering-I — BTEUP Mechanical 3rd Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
11 Min Read
Thermal Engineering-I — BTEUP Mechanical 3rd Semester Syllabus 2026-27

Thermal Engineering-I — What This Subject Is About

Every power station, every steam engine, every boiler and every turbine runs on the same few ideas — heat turning into work, steam carrying energy, and pressure deciding how much work you get out of each kilogram of steam. Thermal Engineering-I is the subject that teaches you those ideas. It is the first thermal subject of the Mechanical Engineering diploma, and almost everything you study later — Thermal Engineering-II in the 4th semester, power plant work, refrigeration and air conditioning — builds on it.

The subject covers five units in 56 periods: the fundamental concepts of thermodynamics; the gas laws and the laws of thermodynamics; the properties of steam and how to read steam tables; steam generators (boilers) and their fittings; and steam turbines and steam nozzles. The paper is a pure theory paper — 60 marks external in 3 hours, with 40 internal marks — and every unit carries the same 12 marks, so no unit can be skipped.

Subject 3.1 (Theory) • Total 100 Marks • 3 Credits • L 4 – P 0 • 3rd Semester — Mechanical Engineering • Session 2026–27

Note: The 3rd-semester subject list is the same across Mechanical Engineering (Automobile), Mechanical Engineering (Production) and Mechanical Engineering (Refrigeration & Air Conditioning) — so this syllabus applies to all three Mechanical sub-branches.
Thermal Engineering-I syllabus — steam turbine, boiler and thermodynamics, BTEUP Mechanical 3rd semester 2026-27
Heat, steam and work — Thermal Engineering-I is where mechanical engineers learn how thermal machines really work.

What You Will Study

Unit 1 — Fundamental Concepts (10 Periods, 12 Marks)

Role of Thermodynamics in Engineering. Thermodynamic state and system, boundary, surrounding, universe, thermodynamic systems – closed, open, isolated, adiabatic, homogeneous and heterogeneous, properties of system, thermodynamic equilibrium, quasi-static process, reversible and irreversible processes, Zeroth law of thermodynamics.

The basic vocabulary of the subject — what a system is, what kinds of systems exist, what equilibrium means, and the law that makes temperature measurement possible.

Unit 2 — Thermodynamic Processes on Gases and Laws of Thermodynamics (10 Periods, 12 Marks)

Explanation of perfect gas laws – Boyle's law, Charle's law, Gay-Lussac's law, Universal gas constant, Characteristic gas constants, simple problems on gas equation, Laws of conservation of energy, first law of thermodynamics (Joule's experiment), Application of first law of thermodynamics, Steady flow energy equation, Application of steady flow energy equation, statement of second laws of thermodynamics: Kelvin Planck's statement, Clausius statement, Perpetual motion Machine of first kind, second kind, Carnot cycle, Carnot engine, Introduction of third law of thermodynamics.

How gases behave (the gas laws and pV = mRT), the three laws of thermodynamics, and the energy equation used for boilers, turbines and nozzles — plus the ideal Carnot engine that no real engine can beat.

Unit 3 — Properties of Steam (12 Periods, 12 Marks)

Formation and Industrial uses of Steam; Basic definitions: saturated liquid line, saturated vapour line, liquid region, vapour region, wet region, superheat region, critical point, saturated liquid, saturated vapour, saturation temperature, sensible heat, latent heat, wet steam, dryness fraction, wetness fraction, saturated steam, superheated steam, degree of superheat; Determination of enthalpy, internal energy, latent heat, of wet, dry and superheated steam at a given pressure using steam tables and simple direct problems on the above using table.

How steam is formed, what wet, dry and superheated steam mean, and how to read steam tables to find enthalpy and internal energy — the numbers every turbine and boiler calculation needs.

Unit 4 — Steam Generators (12 Periods, 12 Marks)

Introduction and classification of boilers with example, Boiler mountings and accessories, Brief explanation with line sketches of Cochran, Babcock and Wilcox Boilers, Locomotive boiler; Brief explanation with line sketches of High Pressure Boiler, Draught systems (Natural, forced & induced).

How boilers are classified, which fittings keep a boiler safe (mountings) and which make it efficient (accessories), how the Cochran, Babcock & Wilcox and Locomotive boilers work, and how air is moved through the furnace (draught).

Unit 5 — Steam Turbines and Steam Nozzles (12 Periods, 12 Marks)

Classification of steam turbines with examples. Difference between Impulse & Reaction turbines. Working Principle of a simple De Laval turbine & Parson's Reaction turbine with line diagrams – Velocity diagrams; Basic concept used for calculation of work done, axial thrust, tangential thrust, blade and diagram efficiency, stage efficiency, nozzle efficiency. Governing of steam turbines: Throttle, Bypass & Nozzle control governing. Flow of steam through nozzle; Discharge of steam through nozzles; Critical pressure ratio; Effect of friction in nozzles and Super saturated flow in nozzles.

How steam turbines turn steam into shaft work — impulse vs reaction, the De Laval and Parson turbines, velocity diagrams, governing (speed control) — and how nozzles accelerate steam, including the critical pressure ratio.

Complete Syllabus

The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
3.1Thermal Engineering-ITheory4 – 03Theory 40Theory 60 (3 hrs)100
Thermal Engineering-I Total34060100

Units at a Glance

UnitTopicPeriodsMarks
1Fundamental Concepts1012
2Thermodynamic Processes on Gases and Laws of Thermodynamics1012
3Properties of Steam1212
4Steam Generators1212
5Steam Turbines and Steam Nozzles1212
Total5660

Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.

Reference Books

As listed in the syllabus:

  • Engineering Thermodynamics by P. K. Nag; Tata McGraw Hill, Delhi.
  • Basic Engineering Thermodynamics by Roy Chaudhary; Tata McGraw Hill, Delhi.
  • Engineering Thermodynamics by C. P. Arora; Tata McGraw Hill, Delhi.
  • R. K. Rajput, Thermal Engineering, Laxmi Publications Pvt Ltd, New Delhi.
  • R. S. Khurmi, J. K. Gupta, A Textbook of Thermal Engineering, S. Chand Publications.
  • Ebooks/e-tools/relevant software to be used as recommended by AICTE/BTE, Lucknow.

How to Prepare for Thermal Engineering-I

Start with Unit 1 and Unit 2, in order. The definitions from Unit 1 (system, property, equilibrium, reversible process) are used in every later unit, and the gas laws and the first and second laws from Unit 2 are the tools that Units 3, 4 and 5 keep using. Students who jump straight to boilers and turbines without the laws always struggle.

Make steam tables your friend. Unit 3 is the most numerical unit: enthalpy of wet, dry and superheated steam, internal energy, dryness fraction. Practise reading hf, hfg and hg from the tables until finding them takes seconds, not minutes — in the exam, the table reading is half the question.

Practise the sketches until you can draw them from memory. The Cochran boiler, the Babcock and Wilcox boiler, the Locomotive boiler and the velocity diagrams are all asked with the words “with a neat diagram” or “with a line sketch”. A clean, labelled sketch with a short working description is worth full marks; a page of text without the sketch is not.

Learn the differences as pairs. Closed vs open system, reversible vs irreversible, sensible vs latent heat, mountings vs accessories, fire-tube vs water-tube, impulse vs reaction, forced vs induced draught — this paper loves “differentiate” questions, and a two-column comparison is the fastest way to answer them.

Finish with timed practice. Work through model papers in one sitting of 3 hours, without notes — exactly like the real examination. Then compare your answers with the model answer outline and note the points you missed. Questions that repeat across sets are the subject's most important questions.

Exam Tips

  • Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered — pick the two parts you know best in every question, and do not leave any question blank.
  • Convert units before substituting. The commonest numerical mistake in this paper is using gauge pressure instead of absolute pressure, or Celsius instead of kelvin, in pV = mRT. Convert first, then calculate.
  • Show your steam-table readings. In a steam numerical, write down the hf, hfg and vg values you read from the table and the pressure at which you read them — examiners give marks for the correct reading even if the last step slips.
  • Draw neat, labelled diagrams wherever they are asked. Label every part of a boiler sketch and every velocity in a velocity diagram; an unlabelled sketch earns little.
  • Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.
  • Write in your own words, in the same order as the questions. Short, clear points with the key terms score better than long copied paragraphs.

Frequently Asked Questions

How many marks is Thermal Engineering-I worth in the 3rd semester?
100 marks in total and 3 credits: internal assessment 40 marks (theory) and external theory paper 60 marks in 3 hours.

Which units carry the most marks in Thermal Engineering-I?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Units 3, 4 and 5 get slightly more teaching time (12 periods each) than Units 1 and 2 (10 periods each). The complete unit-wise table is in the Complete Syllabus section above.

Is Thermal Engineering-I a theory subject or a practical subject?
It is a pure theory subject (L–P 4 – 0, no practical hours). Its follow-up, Thermal Engineering-II in the 4th semester, is a practicum subject.

What are the most scoring topics in Thermal Engineering-I?
The numericals — gas-equation problems from Unit 2 and steam-table problems from Unit 3 — are the most scoring, because a correct method with correct table readings earns full marks step by step. The labelled sketches (Cochran and Babcock & Wilcox boilers, velocity diagrams) are the next best scorers. But since every unit carries 12 marks, no unit should be left out.

Which books should I refer to for Thermal Engineering-I?
The syllabus lists 5 books, including Engineering Thermodynamics by P. K. Nag and A Textbook of Thermal Engineering by R. S. Khurmi and J. K. Gupta, among others. The full list is in the Complete Syllabus section above.

Does this subject apply to all Mechanical sub-branches?
Yes. The 3rd-semester subject list is the same for Mechanical Engineering (Automobile), Mechanical Engineering (Production) and Mechanical Engineering (Refrigeration & Air Conditioning).

How can I download the Thermal Engineering-I syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Thermal Engineering-I

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Thermal Engineering-I Syllabus PDF

Download the complete Thermal Engineering-I syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Thermal Engineering-I Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Automobile), effective session 2025-26 (urise.up.gov.in). Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →