Workshop Practice — What This Subject Is About
To give hands-on workshop experience — measuring, cutting, fitting, joining and finishing — with real tools, safely and correctly.
Common Curriculum • 1st Semester • All 41 Engineering Branches • 1st Semester (First Year — Common Curriculum) • Session 2026–27

Examination Scheme — 1st & 2nd Semester (Official, Verified 2026-27)
The scheme below is from the official 1st-year curriculum (folder2627), corrected and approved by the Board of Technical Education, U.P. Lucknow in the C.D.C. meeting held on 16.07.2026. Each period is 60 minutes, each session is 16 weeks, with at least 14 effective teaching weeks.
1st Semester — 18 Credits, 900 Marks
| Sr. No. | Subject | L–T–P | Credits | Internal | External | Total Marks |
|---|---|---|---|---|---|---|
| 1.1 | Mathematics-I | 2–1–0 | 3 | Th 40 | Th 60 | 100 |
| 1.2 | Applied Physics-I | 3–0–2 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 1.3 | Applied Chemistry OR Introduction to IT and AI | 3–0–2 / 2–0–4 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 1.4 | Communication Skills in English OR Fundamentals of Electrical & Electronics Engineering | 3–0–2 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 1.5 | Engineering Graphics OR Engineering Workshop Practice | 0–0–4 | 2 | Graphics: Pr 40 / Workshop: Pr 60 | Graphics: Th 60 / Workshop: Pr 40 | 100 |
| 1.6 | Sports & Yoga | 0–0–2 | 1 | Pr 50 | — | 50 |
| — | Student Centred Activities (SCA) | 0–0–10 | — | Pr 50 | — | 50 |
| 1st Semester Total | 18 | — | — | 900 | ||
2nd Semester — 22 Credits, 1050 Marks
| Sr. No. | Subject | L–T–P | Credits | Internal | External | Total Marks |
|---|---|---|---|---|---|---|
| 2.1 | Mathematics-II | 3–1–0 | 4 | Th 40 | Th 60 | 100 |
| 2.2 | Applied Physics-II | 3–0–2 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 2.3 | Introduction to IT and AI OR Applied Chemistry | 2–0–4 / 3–0–2 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 2.4 | Fundamentals of Electrical & Electronics Engineering OR Communication Skills in English | 3–0–2 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 2.5 | Engineering Mechanics | 2–1–2 | 4 | Th 40 + Pr 60 | Th 60 + Pr 40 | 200 |
| 2.6 | Engineering Workshop Practice OR Engineering Graphics | 0–0–4 | 2 | Workshop: Pr 60 / Graphics: Pr 40 | Workshop: Pr 40 / Graphics: Th 60 | 100 |
| 2.7 | (Q) Environmental Sciences | 3–0–0 | — (Audit) | — | Th 60* | — |
| — | Student Centred Activities (SCA) | 0–0–4 | — | Pr 50 | — | 50 |
| 2nd Semester Total | 22 | — | — | 1050 | ||
About the OR choices: at Sr. No. 1.3, 1.4 and 1.5 the institute chooses which alternative runs in the 1st semester; the other alternative then runs in the 2nd semester (1.3 ↔ 2.3, 1.4 ↔ 2.4, 1.5 ↔ 2.6). An alternative once selected in the 1st semester is not selected again in the 2nd semester.
No paper codes: the official 1st-year curriculum gives no paper codes — subjects are numbered 1.1–1.6 in the 1st semester and 2.1–2.7 in the 2nd semester only.
Qualifying subject: Environmental Sciences (2.7, Q) is an audit subject — you must appear and pass, but its 60 external marks are not counted for percentage or division. A 4-week summer internship (Internship–I) is organised after the 2nd-semester examination and is evaluated in the 3rd semester.
What You Will Study
Fitting Shop
Measuring instruments; marking; filing; sawing; drilling; tapping.
Making a metal piece to exact size by hand — the core workshop skill.
Carpentry & Joinery
Woodworking tools; joints; simple wooden jobs.
Working with wood: cutting, shaping and joining it cleanly.
Welding & Sheet Metal
Arc and gas welding in brief; sheet-metal cutting, bending and joining.
Joining metals and shaping thin sheets — used in fabrication everywhere.
Safety & Housekeeping
Workshop safety rules; personal protective equipment; tool care.
The habits that keep you and others safe in any workshop or lab.
How This Helps You Later
Workshop is where you stop being only a theory student and become a practical engineer. Many students take it lightly — do not.
Complete Syllabus
The four areas in the "What You Will Study" section above — Fitting Shop, Carpentry & Joinery, Welding & Sheet Metal, Safety & Housekeeping — are the complete subject content as per the official 1st-year common curriculum (folder2627, NEP-2020), which is the same for all 41 engineering branches. The scheme — 1st semester 18 credits and 900 marks, 2nd semester 22 credits and 1050 marks — is given in the Examination Scheme section above, from the official 1st-year curriculum approved in the C.D.C. meeting held on 16.07.2026. There are no paper codes in the official curriculum; subjects are numbered 1.1–1.6 and 2.1–2.7 only.
Frequently Asked Questions
Is Workshop Practice the same for all branches?
Yes. The first year of a BTEUP diploma runs on one common curriculum for 41 engineering branches, so this subject is the same whether you are in Computer Science, Mechanical, Civil or Electrical.
How many marks is Workshop Practice worth?
Engineering Workshop Practice (1.5 in the 1st semester or 2.6 in the 2nd) carries 100 marks (2 credits, P4) — internal practical 60, external practical 40. The institute chooses which semester it runs in; the other semester runs Engineering Graphics — see the Examination Scheme section above.
What does Workshop Practice cover?
Four areas: Fitting Shop, Carpentry & Joinery, Welding & Sheet Metal and Safety & Housekeeping.
How does Workshop Practice help later?
Workshop is where you stop being only a theory student and become a practical engineer. Many students take it lightly — do not.
How can I download the Workshop Practice syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.
Related Syllabus Posts
- BTEUP CSE Complete Syllabus 2026-27 — 1st, 3rd & 5th Semester (All Subjects)
- Engineering Graphics — BTEUP 1st Semester Syllabus 2026-27
- Engineering Mechanics — BTEUP 1st Semester Syllabus 2026-27
- Environmental Science — BTEUP 1st Semester Syllabus 2026-27
Download the Workshop Practice Syllabus PDF
Download the complete Workshop Practice syllabus PDF below — prepared by KAMALDNP, with the full topic list.
Download the Workshop Practice Syllabus PDF
Source: BTEUP 1st Year common curriculum (folder2627), NEP-2020 aligned — scheme and subject areas verified from the official 1st-year curriculum, approved in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!