SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Workshop Practice — BTEUP 1st Semester Syllabus 2026-27

KAMALDNP Admin
October 26, 2026
6 Min Read
Workshop Practice — BTEUP 1st Semester Syllabus 2026-27

Workshop Practice — What This Subject Is About

To give hands-on workshop experience — measuring, cutting, fitting, joining and finishing — with real tools, safely and correctly.

Common Curriculum • 1st Semester • All 41 Engineering Branches • 1st Semester (First Year — Common Curriculum) • Session 2026–27

About this document: The first year of a BTEUP diploma runs on one common curriculum for 41 engineering branches, so this subject is the same whether you are in Computer Science, Mechanical, Civil or Electrical. The subject areas below are from the official 1st-year curriculum (folder2627, NEP-2020). The scheme — 1st semester 18 credits and 900 marks, 2nd semester 22 credits and 1050 marks — is given in the Examination Scheme section below.
A student wearing safety glasses filing a piece of metal held in a vice
Workshop practice is hands-on — measuring, cutting, filing and joining, with real tools and real safety rules.

Examination Scheme — 1st & 2nd Semester (Official, Verified 2026-27)

The scheme below is from the official 1st-year curriculum (folder2627), corrected and approved by the Board of Technical Education, U.P. Lucknow in the C.D.C. meeting held on 16.07.2026. Each period is 60 minutes, each session is 16 weeks, with at least 14 effective teaching weeks.

1st Semester — 18 Credits, 900 Marks

Sr. No.SubjectL–T–PCreditsInternalExternalTotal Marks
1.1Mathematics-I2–1–03Th 40Th 60100
1.2Applied Physics-I3–0–24Th 40 + Pr 60Th 60 + Pr 40200
1.3Applied Chemistry OR Introduction to IT and AI3–0–2 / 2–0–44Th 40 + Pr 60Th 60 + Pr 40200
1.4Communication Skills in English OR Fundamentals of Electrical & Electronics Engineering3–0–24Th 40 + Pr 60Th 60 + Pr 40200
1.5Engineering Graphics OR Engineering Workshop Practice0–0–42Graphics: Pr 40 / Workshop: Pr 60Graphics: Th 60 / Workshop: Pr 40100
1.6Sports & Yoga0–0–21Pr 50—50
—Student Centred Activities (SCA)0–0–10—Pr 50—50
1st Semester Total18——900

2nd Semester — 22 Credits, 1050 Marks

Sr. No.SubjectL–T–PCreditsInternalExternalTotal Marks
2.1Mathematics-II3–1–04Th 40Th 60100
2.2Applied Physics-II3–0–24Th 40 + Pr 60Th 60 + Pr 40200
2.3Introduction to IT and AI OR Applied Chemistry2–0–4 / 3–0–24Th 40 + Pr 60Th 60 + Pr 40200
2.4Fundamentals of Electrical & Electronics Engineering OR Communication Skills in English3–0–24Th 40 + Pr 60Th 60 + Pr 40200
2.5Engineering Mechanics2–1–24Th 40 + Pr 60Th 60 + Pr 40200
2.6Engineering Workshop Practice OR Engineering Graphics0–0–42Workshop: Pr 60 / Graphics: Pr 40Workshop: Pr 40 / Graphics: Th 60100
2.7(Q) Environmental Sciences3–0–0— (Audit)—Th 60*—
—Student Centred Activities (SCA)0–0–4—Pr 50—50
2nd Semester Total22——1050

About the OR choices: at Sr. No. 1.3, 1.4 and 1.5 the institute chooses which alternative runs in the 1st semester; the other alternative then runs in the 2nd semester (1.3 ↔ 2.3, 1.4 ↔ 2.4, 1.5 ↔ 2.6). An alternative once selected in the 1st semester is not selected again in the 2nd semester.

No paper codes: the official 1st-year curriculum gives no paper codes — subjects are numbered 1.1–1.6 in the 1st semester and 2.1–2.7 in the 2nd semester only.

Qualifying subject: Environmental Sciences (2.7, Q) is an audit subject — you must appear and pass, but its 60 external marks are not counted for percentage or division. A 4-week summer internship (Internship–I) is organised after the 2nd-semester examination and is evaluated in the 3rd semester.

What You Will Study

Fitting Shop

Measuring instruments; marking; filing; sawing; drilling; tapping.

Making a metal piece to exact size by hand — the core workshop skill.

Carpentry & Joinery

Woodworking tools; joints; simple wooden jobs.

Working with wood: cutting, shaping and joining it cleanly.

Welding & Sheet Metal

Arc and gas welding in brief; sheet-metal cutting, bending and joining.

Joining metals and shaping thin sheets — used in fabrication everywhere.

Safety & Housekeeping

Workshop safety rules; personal protective equipment; tool care.

The habits that keep you and others safe in any workshop or lab.

How This Helps You Later

Workshop is where you stop being only a theory student and become a practical engineer. Many students take it lightly — do not.

Complete Syllabus

The four areas in the "What You Will Study" section above — Fitting Shop, Carpentry & Joinery, Welding & Sheet Metal, Safety & Housekeeping — are the complete subject content as per the official 1st-year common curriculum (folder2627, NEP-2020), which is the same for all 41 engineering branches. The scheme — 1st semester 18 credits and 900 marks, 2nd semester 22 credits and 1050 marks — is given in the Examination Scheme section above, from the official 1st-year curriculum approved in the C.D.C. meeting held on 16.07.2026. There are no paper codes in the official curriculum; subjects are numbered 1.1–1.6 and 2.1–2.7 only.

Frequently Asked Questions

Is Workshop Practice the same for all branches?
Yes. The first year of a BTEUP diploma runs on one common curriculum for 41 engineering branches, so this subject is the same whether you are in Computer Science, Mechanical, Civil or Electrical.

How many marks is Workshop Practice worth?
Engineering Workshop Practice (1.5 in the 1st semester or 2.6 in the 2nd) carries 100 marks (2 credits, P4) — internal practical 60, external practical 40. The institute chooses which semester it runs in; the other semester runs Engineering Graphics — see the Examination Scheme section above.

What does Workshop Practice cover?
Four areas: Fitting Shop, Carpentry & Joinery, Welding & Sheet Metal and Safety & Housekeeping.

How does Workshop Practice help later?
Workshop is where you stop being only a theory student and become a practical engineer. Many students take it lightly — do not.

How can I download the Workshop Practice syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Download the Workshop Practice Syllabus PDF

Download the complete Workshop Practice syllabus PDF below — prepared by KAMALDNP, with the full topic list.

Download the Workshop Practice Syllabus PDF

Source: BTEUP 1st Year common curriculum (folder2627), NEP-2020 aligned — scheme and subject areas verified from the official 1st-year curriculum, approved in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →