SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Advanced Manufacturing Processes — BTEUP Mechanical (Production) 5th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
11 Min Read
Advanced Manufacturing Processes — BTEUP Mechanical (Production) 5th Semester Syllabus 2026-27

Advanced Manufacturing Processes — What This Subject Is About

A turbine blade, a mobile-phone case, a car body panel — none of them can be made by an ordinary lathe and a file. Modern industry needs processes that cut harder materials, hold tighter tolerances and run without a worker standing at every machine. Advanced Manufacturing Processes is the subject that teaches you those processes: the non-traditional machining methods, CNC programming, and the automation and robotics that run a modern factory.

The subject covers five units in 42 periods: cutting tools and tool materials; plastic processing and powder metallurgy; modern and hybrid machining processes; CNC machining and operations; and automation and robotics. It is a practicum subject — 3 lecture periods and 3 practical periods a week, with 40 internal practical marks and a 60-mark external theory paper in 3 hours — and every unit carries the same 12 marks in that theory paper, so no unit can be skipped. The practical list has 8 experiments, from studying EDM and CNC machines to making a part programme and a composite specimen.

Subject 5.5 (Practicum) • Total 100 Marks • 4 Credits • L 3 – P 3 • 5th Semester — Mechanical Engineering (Production) • Session 2026–27

Note: This is the Production sub-branch's 5.5 subject. The Automobile sub-branch takes Automobile Maintenance Servicing & Repair as its 5.5 subject instead.
Advanced Manufacturing Processes syllabus — EDM, CNC machining and robotics, BTEUP Mechanical (Production) 5th semester 2026-27
Beyond the lathe — EDM sparks, CNC programs and robots are how modern factories make things.

What You Will Study

Unit 1 — Cutting Tools; Cutting Tool Materials (6 Periods, 12 Marks)

Cutting Tools: Various types of single point cutting tools and their uses, Single point cutting tool geometry, tool signature and its effect, Heat produced during cutting and its effect, Cutting speed, feed and depth of cut and their effect, multipoint cutting tools, reamer, drill, milling cutter, throw-away inserts, chip breaker, tool and cutter maintenance, regrinding and lapping of tools. Cutting Tool Materials: Properties of cutting tool material, Study of various cutting tool materials viz. High-speed steel, tungsten carbide, cobalt steel, cemented carbides, stellite, ceramics and diamond.

How cutting tools are shaped and kept sharp, what cutting speed, feed and depth of cut do, and which tool material suits which job.

Unit 2 — Plastic Processing; Powder Metallurgy (6 Periods, 12 Marks)

Plastic Processing: Processing of plastics; Moulding processes: Injection moulding, Compression moulding, Transfer moulding; Extruding; Casting; Calendaring; Fabrication methods: Sheet forming, Blow moulding, Laminating plastics (sheets, rods and tubes), Reinforcing; Applications of Plastics. Powder Metallurgy: Introduction, Powder Fabrication: Mechanical and Chemical fabrication, Powder Characterization: Particle size measurement, BET surface area, Interparticle friction, Powder packing, mixing and blending, Shaping and Compaction, Slurry techniques and Sintering.

How plastics are moulded, extruded and fabricated, and how metal parts are made from powder: press it, then sinter it.

Unit 3 — Modern Machining Processes; Hybrid Machining Processes (10 Periods, 12 Marks)

Modern Machining Processes: Introduction, comparison with traditional machining; Ultrasonic Machining: principle, Description of equipment, applications; Electric Discharge Machining: Principle, Description of equipment, Dielectric fluid, tools (electrodes), Process parameters, Output characteristics, applications; Wire cut EDM: Principle, Description of equipment, Controlling parameters; applications; Abrasive Jet Machining: principle, description of equipment, application; Laser Beam Machining: principle, description of equipment, application; Electro Chemical Machining: description of equipment, application. Hybrid Machining Processes: Concept; Classification of Hybrid Machining Processes; Major Elements of Hybrid Machining Technology; Benefits of Hybrid Machining Technology.

Machining without a cutting tool: sparks (EDM), electrolysis (ECM), ultrasound (USM), abrasive jets (AJM) and lasers (LBM), and hybrids that combine two processes.

Unit 4 — CNC Machining and Operations (10 Periods, 12 Marks)

Vertical and horizontal machining center: Constructional features, Axis identification, Electronic control system. Automatic tool changer and tool magazine. CNC programming: Preparatory functions (G code), miscellaneous functions (M code), Part programming including subroutines and canned cycles. Principles of computer aided part programming.

How CNC machining centres work, how their axes and tool changers are organised, and how part programs are written in G and M codes, with subroutines and canned cycles.

Unit 5 — Automation and Robotics (10 Periods, 12 Marks)

Introduction and Need; (A) Single spindle automates, transfer lines. (B) Elements of control system, Limit switches, Proximity switches, Block diagram for feedback and servo control system, Introduction to PLC, Block diagram of PLC. Robotics: Definition, Classification of Robots: Geometric classification and Control classification, Laws of Robotics, Robot Components, Coordinate Systems, Robot applications in manufacturing: Material transfer and machine loading/unloading, Processing operations like Welding and painting, Assembly operations, Inspection automation, Limitation of usage of robots in processing operation.

Why factories automate, how PLCs and servo controls run machines, and what robots can and cannot do in manufacturing.

Complete Syllabus

The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
5.5Advanced Manufacturing ProcessesPracticum3 – 34Practical 40Theory 60 (3 hrs)100
Advanced Manufacturing Processes Total44060100

Units at a Glance

UnitTopicPeriodsMarks
1Cutting Tools; Cutting Tool Materials612
2Plastic Processing; Powder Metallurgy612
3Modern Machining Processes; Hybrid Machining Processes1012
4CNC Machining and Operations1012
5Automation and Robotics1012
Total4260

Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.

Reference Books

As listed in the syllabus:

  • Production Technology – HMT, Bangalore, Tata Mc-Graw Hill.
  • CNC machines – Pabla B. S. and M. Adithan, New Age International Limited.
  • Non conventional Machining – P. K. Mistra, Narvasa Publishining House.
  • Manufacturing Processes – Begman and Amsted, John Willey and Sons.
  • Advanced manufacturing technology – David L. Goetsch.
  • Exploring Advanced Manufacturing Technologies – Stephen F. Krar and Arthur Gil, Industrial Press.
  • Website for reference: http://swayam.gov.in

How to Prepare for Advanced Manufacturing Processes

Learn the non-traditional processes as a comparison table. Unit 3 is the biggest unit, and its questions are almost always comparisons: EDM vs ECM, USM vs AJM, LBM vs EBM. For each process, learn the same five facts — principle, equipment, process parameters, material removal rate, applications — and the comparisons write themselves.

Practise writing G and M codes by hand. Unit 4 asks for part programmes, and the only way to learn them is to write them: a facing and turning programme for the lathe, a profile programme for the mill, with subroutines and canned cycles. One programme written by hand teaches more than ten read in a book.

Know your tool materials in order. Unit 1 asks which tool material suits which job: high-speed steel, carbide, ceramic, diamond — in order of hardness and cost. Learn the order, and the “which tool for which material” questions answer themselves.

Draw the block diagrams. The PLC block diagram, the servo control loop, the robot's coordinate systems — Unit 5 is a diagram unit. A labelled block diagram with a two-line explanation of each block is the fastest full-mark answer in this paper.

Finish with timed practice. Work through model papers in one sitting of 3 hours, without notes — exactly like the real examination. Then compare your answers with the model answer outline and note the points you missed. Questions that repeat across sets are the subject's most important questions.

Exam Tips

  • Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered — pick the two parts you know best in every question, and do not leave any question blank.
  • Answer comparisons in two columns. When a question asks you to compare two processes, a table — principle, tool, medium, accuracy, application — scores better than two separate paragraphs, and it is faster to write.
  • Name the process before describing it. In a question about “a process that machines by sparks”, write “Electric Discharge Machining (EDM)” in the first line — examiners give marks for the correct identification even if the description is short.
  • Draw neat, labelled diagrams wherever they are asked. Label every part of an EDM setup, a CNC machining centre and a PLC block diagram; an unlabelled sketch earns little.
  • Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.
  • Write in your own words, in the same order as the questions. Short, clear points with the key terms score better than long copied paragraphs.

Frequently Asked Questions

How many marks is Advanced Manufacturing Processes worth in the 5th semester?
100 marks in total and 4 credits: internal assessment 40 marks (practical) and external theory paper 60 marks in 3 hours.

Which units carry the most marks in Advanced Manufacturing Processes?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Units 3, 4 and 5 get more teaching time (10 periods each) than Units 1 and 2 (6 periods each). The complete unit-wise table is in the Complete Syllabus section above.

Is Advanced Manufacturing Processes a theory subject or a practical subject?
It is a practicum subject (L–P 3 – 3, 8 practicals listed in the syllabus). Its internal marks are practical marks (40); its external paper is a 60-mark theory paper in 3 hours.

What are the most scoring topics in Advanced Manufacturing Processes?
The Unit 3 comparisons (EDM, ECM, USM, AJM, LBM) and the Unit 4 part programmes are the most scoring, because a well-organised comparison table and a correct programme earn full marks step by step. The labelled block diagrams (PLC, servo control) are the next best scorers. But since every unit carries 12 marks, no unit should be left out.

Which books should I refer to for Advanced Manufacturing Processes?
The syllabus lists 6 books, including Production Technology by HMT and CNC Machines by Pabla and Adithan, among others, plus the reference website swayam.gov.in. The full list is in the Complete Syllabus section above.

Which sub-branch takes this subject?
Mechanical Engineering (Production) takes Advanced Manufacturing Processes as its 5.5 subject. The Automobile sub-branch takes Automobile Maintenance Servicing & Repair as its 5.5 subject instead.

How can I download the Advanced Manufacturing Processes syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Advanced Manufacturing Processes

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Advanced Manufacturing Processes Syllabus PDF

Download the complete Advanced Manufacturing Processes syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Advanced Manufacturing Processes Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Production), effective session 2026-27, approved by the Board of Technical Education, U.P. Lucknow in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-English summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →