Estimating Costing and Valuation — यह विषय किस बारे में है
एक भी ईंट लगने से पहले, किसी को दो सवालों के जवाब देने होते हैं: इस building में कितना material लगेगा, और उसकी लागत कितनी होगी? यही Estimating Costing and Valuation सिखाता है। यह diploma के सबसे practical विषयों में से एक है — वही skill जो हर site engineer, contractor और quantity surveyor रोज़ इस्तेमाल करता है।
आप drawing से quantities निकालना सीखेंगे (long-wall, short-wall और centre-line methods), bar bending schedules बनाना, किसी भी item की दर निकालना, और एक मकान, एक सड़क, एक culvert और एक septic tank तक का detailed estimate तैयार करना। आखिरी unit में दो ऐसी चीज़ें हैं जिनसे हर civil engineer असली ज़िंदगी में मिलता है: tenders और contracts, और RERA Act 2016 के साथ property valuation।
विषय 5.2 (Practicum/Theory) • कुल 100 अंक • 3 क्रेडिट • L 1 – P 4 • पाँचवाँ सेमेस्टर — Civil Engineering • सत्र 2026–27
आप क्या पढ़ेंगे
Unit 1 — Fundamentals of Estimating and Costing (10 Periods, 10%)
Estimating and costing — meaning, purpose, administrative approval, technical sanction and budget provision; measurement: units of measurement for various items of work, rules for deduction in different category of work as per IS:1200; types of estimates — approximate and detailed estimate; types and uses of estimates: revised estimate, supplementary estimate, repair and maintenance estimate, renovation estimate; roles and responsibility of estimator; standard formats of measurement sheet, abstract sheet, face sheet; modes of measurement and desired accuracy in measurements for different items of work as per IS:1200.
Estimating और costing का क्या मतलब है, वे क्यों ज़रूरी हैं, और हर item of work को मापने के नियम (IS:1200)।
Unit 2 — Estimate (20 Periods, 25%)
Detailed estimate — definition and purpose, data required for detailed estimate — civil cost, GST, contingencies, supervision charges, agency charges, work charged establishment, procedure for preparation of detailed estimate — taking out quantities and abstracting; long wall and short wall method, centre line method; bar bending schedule for footing, column, beam, lintel, chajja and slab elements; earthwork — quantities for roads, embankment and canal by — mid sectional area method, mean sectional area method, prismoidal and trapezoidal formula method; a small residential building with a flat roof comprising of — two rooms with W.C., bath, kitchen and verandah; WBM road and pre-mix carpeting; single span RCC slab culvert; earthwork for plain and hill roads; RCC work in beams, slab, column and lintel, foundation; 10 users septic tank.
Detailed estimate कैसे तैयार किया जाता है — long-wall, short-wall और centre-line methods से quantities निकालना, bar bending schedules, और एक छोटे मकान, एक सड़क, एक culvert और एक septic tank के estimates।
Unit 3 — Rate Analysis (15 Periods, 25%)
Calculation of quantities of materials for: cement mortars of different proportion, cement concrete of different proportion, brick/stone masonry in cement mortar of different proportion, plastering, pointing and painting, D.P.C. and flooring; categories of labours, their daily wages, types and number of labours for different items of work; rate analysis: definition, purpose and importance, procedure for rate analysis; preparing rate analysis of different items of work pertaining to buildings and roads.
किसी भी item की दर कैसे निकाली जाती है — cement, sand और bricks की quantities, मज़दूर और उनकी मज़दूरी, और rate analysis की प्रक्रिया।
Unit 4 — Tender and Contractorship (15 Periods, 25%)
Tender, tender forms and documents, tender notice, submission of tender and deposit of earnest money, security deposit, retention money, maintenance period; meaning of contract, types of contracts, their advantages, disadvantages and suitability, system of payment; exercises on writing detailed specifications of different types of building works: earthwork, brick work and RCC work.
काम असल में कैसे दिया जाता है — tenders, earnest money, security deposit, contracts के प्रकार, और detailed specifications लिखना।
Unit 5 — Real Estate (Regulation and Development) Act-2016 and Valuation (10 Periods, 15%)
Introduction: purpose and salient features of Act; definition and functions of real estate projects, promoter, agent and allottees; registration of real estate projects; valuation: purpose of valuation, principles of valuation; definition of various terms related to valuation like depreciation, sinking fund, salvage and scrap value, market value, fair rent, year's purchase etc.
RERA Act 2016 — खरीदारों, promoters और agents के लिए इसका क्या मतलब है — और property की valuation कैसे होती है: depreciation, sinking fund, market value और year's purchase।
पूरा सिलेबस
आधिकारिक सिलेबस से पूरी परीक्षा योजना, practicals की पूरी सूची और संदर्भ पुस्तकें। यूनिट के अनुसार topics ऊपर “आप क्या पढ़ेंगे” वाले हिस्से में दिए गए हैं।
परीक्षा योजना
| कोड | पेपर | प्रकार | L – P | क्रेडिट | आंतरिक | बाह्य | कुल |
|---|---|---|---|---|---|---|---|
| 5.2 | Estimating Costing and Valuation | Practicum/Theory | 1 – 4 | 3 | Theory 20 + Practical 20 | Theory 60 (3 hrs) | 100 |
| Estimating Costing and Valuation Total | 3 | 40 | 60 | 100 | |||
एक नज़र में यूनिट्स
| यूनिट | विषय | पीरियड | अंकों का हिस्सा |
|---|---|---|---|
| 1 | Fundamentals of Estimating and Costing | 10 | 10% |
| 2 | Estimate | 20 | 25% |
| 3 | Rate Analysis | 15 | 25% |
| 4 | Tender and Contractorship | 15 | 25% |
| 5 | Real Estate (Regulation and Development) Act-2016 and Valuation | 10 | 15% |
संदर्भ पुस्तकें
सिलेबस में दिए अनुसार:
- Datta, B.N., Estimating and Costing in Civil engineering, UBS Publishers Distributors Pvt. Ltd., New Delhi.
- Peurifoy, Robert L., Oberlender, Garold, Estimating construction cost (fifth edition), McGraw Hill Education, New Delhi.
- Rangwala, S.C., Estimating and Costing, Charotar Publishing House Pvt. Ltd., Anand.
- Birdie, G.S., Estimating and Costing, Dhanpat Rai Publishing Company (P) Ltd., New Delhi.
- Patil, B.S., Civil Engineering Contracts and Estimates, Orient Longman, Mumbai.
- Chakraborti, M., Estimating and costing, specification and valuation in civil engineering, Monojit Chakraborti, Kolkata.
- CPWD and PWD Schedule of Rates.
- Ministry of Road Transport and Highways (MORT&H) Specifications and Analysis of Schedule of Rates.
- D.V.Gupta, Vikram Singh, Quantity Surveying & valuation of Building & Civil Works, Asian Publishers, Muzaffarnagar, ISBN No. 978-93-5502-154-0.
अक्सर पूछे जाने वाले प्रश्न
Estimating Costing and Valuation पाँचवाँ सेमेस्टर में कितने अंकों का है?
कुल 100 अंक और 3 क्रेडिट। Estimating Costing and Valuation: 100 अंक (आंतरिक Theory 20 + Practical 20, बाह्य Theory 60 (3 hrs))।
Estimating Costing and Valuation में किन यूनिट्स का weightage सबसे ज़्यादा है?
Estimate (25%, 20 पीरियड); Rate Analysis (25%, 15 पीरियड); Tender and Contractorship (25%, 15 पीरियड) — इस विषय में सबसे ज़्यादा weightage। यूनिट के अनुसार weightage की पूरी table ऊपर “पूरा सिलेबस” वाले हिस्से में है।
Estimating Costing and Valuation के लिए किन किताबों को देखें?
सिलेबस में 9 किताबें दी गई हैं, जिनमें Datta, B.N., Estimating and Costing in Civil engineering, UBS Publishers Distributors Pvt. Ltd., New Delhi. और Peurifoy, Robert L., Oberlender, Garold, Estimating construction cost (fifth edition), McGraw Hill Education, New Delhi. सहित अन्य किताबें शामिल हैं। पूरी सूची ऊपर “पूरा सिलेबस” वाले हिस्से में है।
क्या Estimating Costing and Valuation theory विषय है या practical विषय?
Estimating Costing and Valuation practicum/theory है (L–P 1 – 4)।
Estimating Costing and Valuation सिलेबस PDF कैसे डाउनलोड करें?
PDF मुफ़्त में डाउनलोड के लिए उपलब्ध है — नीचे Download वाले हिस्से में दिए गए download link का उपयोग करें। यह KAMALDNP द्वारा आधिकारिक BTEUP सिलेबस से तैयार किया गया है।
संबंधित सिलेबस पोस्ट
- BTEUP Civil 5th Semester Syllabus 2026-27
- BTEUP Civil Complete Syllabus 2026-27 — 5th & 6th Semester (All Subjects)
- Transportation Engineering — BTEUP Civil 5th Semester Syllabus 2026-27
- Geotechnical Engineering — BTEUP Civil 5th Semester Syllabus 2026-27
- Design of Steel Structure and Drawing — BTEUP Civil 5th Semester Syllabus 2026-27
- Green Building and Energy Conservation — BTEUP Civil 5th Semester Syllabus 2026-27
Estimating Costing and Valuation सिलेबस PDF डाउनलोड करें
नीचे दिया गया पूरा Estimating Costing and Valuation सिलेबस PDF डाउनलोड करें — KAMALDNP द्वारा तैयार किया गया।
स्रोत: BTEUP तृतीय वर्ष पाठ्यक्रम (folder2627), C.D.C. की 16.07.2026 को हुई बैठक में स्वीकृत। Topic सूचियाँ आधिकारिक सिलेबस के अनुसार हैं; छोटे सारांश लेखक के अपने सरल शब्दों में लिखे गए हैं, सिलेबस का मूल पाठ नहीं हैं। कृपया अपने पॉलिटेक्निक से किसी भी स्थानीय बदलाव की पुष्टि कर लें।
Comments (0)
Share your question or experience about this syllabus. Your comment will appear after review.
No comments yet — be the first to share your thoughts!