SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Green Energy & Engineering — BTEUP Mechanical 6th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
10 Min Read
Green Energy & Engineering — BTEUP Mechanical 6th Semester Syllabus 2026-27

Green Energy & Engineering — What This Subject Is About

Every unit of electricity from coal carries smoke with it; every unit from the sun or the wind does not. Green Energy & Engineering is the subject that teaches the clean half of the energy story: solar and wind systems, ocean and biomass energy, hydrogen, efficient machines, and manufacturing that wastes nothing. It is the most current paper of the 6th semester: the technologies it describes are the ones being installed across India right now, and its numbers, a solar cell's half a volt, wind power's cube law, are the paper's most predictable marks.

The subject covers five units in 42 periods: energy sources and sustainability; solar and wind energy; ocean, biomass and hydrogen energy; energy-efficient systems; and green manufacturing. The paper is a pure theory paper — 60 marks external in 3 hours, with 40 internal marks — and every unit carries the same 12 marks, so no unit can be skipped. The 6th semester is the even semester, so this paper is examined in the even-semester session.

Subject 6.4.1 (Theory) • Total 100 Marks • 3 Credits • L 3 – P 0 • 6th Semester — Mechanical Engineering (Production) • Session 2026–27

Note: Green Energy & Engineering is one of the four Elective Specialization options in the 6th semester — you pick any ONE of the four. The other options are Maintenance of Machine Tools, Non-Destructive Testing and Product Design & Development. Whichever you pick, the paper is the same shape: 60 marks external in 3 hours, 40 internal.
Green Energy & Engineering syllabus — solar, wind, hydrogen and green manufacturing, BTEUP Mechanical 6th semester 2026-27
Clean energy, used wisely — Green Energy & Engineering is the paper the future is built on.

What You Will Study

Unit 1 — Introduction to Energy Sources (8 Periods, 12 Marks)

Overview of conventional and renewable energy sources, types of renewable energy systems, future of energy use, present Indian and international energy scenario of conventional and RE sources, energy for sustainable development, environmental aspects of energy, limitations of RE sources.

Where the world's energy comes from today, what renewable sources offer, and why energy must serve sustainable development.

Unit 2 — Solar Energy and Wind Energy (8 Periods, 12 Marks)

Theory of solar cells, concept of Solar PV systems, flat plate and concentrating collectors, Solar PV applications, solar heating/cooling technique, solar distillation and solar drying, solar cookers. Energy from wind, Horizontal axis Wind Turbine, Vertical Axis Wind Turbine, Wind Energy Conversion Systems.

How sunlight and wind become electricity and heat — solar cells and PV systems, collectors, solar cookers, and horizontal- and vertical-axis wind turbines.

Unit 3 — Ocean, Biomass Energy and Hydrogen (10 Periods, 12 Marks)

OTEC, principles of utilization, setting of OTEC plants, tidal and wave energy. Principles of bio-conversion, types of bio-gas digesters, gas yield, utilization for cooking, bio fuels, I.C. engine operation and economic aspects. Chemical production of hydrogen, electrolytic hydrogen, thermolytic hydrogen, photolytic hydrogen, photobiologic hydrogen production.

Energy from the ocean, from biomass and from hydrogen — OTEC, tides and waves, biogas digesters, biofuels, and the four routes to hydrogen.

Unit 4 — Energy Efficient Systems (8 Periods, 12 Marks)

Energy efficient motors, energy efficient lighting and control. Fuel cells: principles, thermodynamic aspects, selection of fuels and working of various types of fuel cells, environment friendly and energy efficient compressors and pumps.

Using less energy for the same work — efficient motors, lighting, fuel cells, compressors and pumps.

Unit 5 — Green Manufacturing Systems (8 Periods, 12 Marks)

Environment impact of the current manufacturing practices and systems, benefits of green manufacturing systems, selection of recyclable and environment friendly materials in manufacturing, sustainable green production systems, alternate casting and joining techniques, zero waste manufacturing.

Making things cleanly — recyclable materials, sustainable production, alternate casting and joining, and zero-waste manufacturing.

Complete Syllabus

The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
6.4.1Green Energy & EngineeringTheory3 – 03Theory 40Theory 60 (3 hrs)100
Green Energy & Engineering Total34060100

Units at a Glance

UnitTopicPeriodsMarks
1Introduction to Energy Sources812
2Solar Energy and Wind Energy812
3Ocean, Biomass Energy and Hydrogen1012
4Energy Efficient Systems812
5Green Manufacturing Systems812
Total4260

Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.

Reference Books

As listed in the syllabus:

  • D. S. Chauhan & S. K. Srivastava, Non-Conventional Energy Resources, New Age International Private Limited, 4th Edition, 2021.
  • John Twidell & Tony Weir, Renewable Energy Resources, Routledge, 3rd Edition, 2015.
  • D. P. Kothari, K. C. Singal & Rakesh Ranjan, Renewable Energy Sources and Emerging Technologies, PHI Learning, 3rd Edition, 2022.
  • Ritu Dogra, Renewable Energy and Green Technology, Brillion Publishing, 1st Edition, 2023.
  • Soli J. Arceivala, Green Technologies, McGraw Hill Education (India) Private Limited, 1st Edition, 2017.
  • Chandan Deep Singh & Harleen Kaur, Sustainable Green Development and Manufacturing Performance through Modern Production Techniques, Taylor & Francis Ltd, 1st Edition, 2021.
  • Web: https://onlinecourses.nptel.ac.in/noc21_ch11/preview

How to Prepare for Green Energy & Engineering

Learn the numbers that anchor each unit. A solar cell gives about 0.5 V, a flat-plate collector reaches 60–80 °C, wind power rises with the cube of wind speed, a fuel cell runs at 40–60% efficiency. The paper's short questions are built on numbers like these.

Draw the systems as block diagrams. A solar PV system, a wind energy conversion system, an OTEC plant, a biogas digester: a labelled block diagram with a one-line note per block is the full-marks answer for every one of them.

Compare in tables. Horizontal-axis vs vertical-axis wind turbines, flat-plate vs concentrating collectors, conventional vs renewable sources. The paper loves comparison questions, and a two-column table is the fastest answer.

Keep the hydrogen routes separate. Chemical, electrolytic, thermolytic, photolytic and photobiologic production are five different routes; mixing them up is the commonest Unit III mistake. One line each.

Finish with the manufacturing unit. Green manufacturing (Unit V) is the shortest unit to revise, recyclable materials, sustainable production, zero waste, and it is often the easiest 12 marks in the paper.

Exam Tips

  • Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered. Pick the two parts you know best in every question, and do not leave any question blank.
  • State the number, then the meaning. 'Wind power varies with the cube of wind speed; double the speed, eight times the power' earns more than either half alone.
  • Label every diagram. A solar collector sketch or a wind turbine diagram without labels earns little; name every part.
  • Answer 'advantages and limitations' as two lists. Every energy source in this paper has both; a balanced pair of short lists is the full-marks answer.
  • Use Indian examples where you can. Solar cookers, biogas plants, wind farms. The paper is about technologies in use, and a real example shows you know them.
  • Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.

Frequently Asked Questions

How many marks is Green Energy & Engineering worth in the 6th semester?
100 marks in total and 3 credits: internal assessment 40 marks (theory) and external theory paper 60 marks in 3 hours.

Which units carry the most marks in Green Energy & Engineering?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Teaching time differs slightly: Unit 1, Unit 2, Unit 4 and Unit 5 get 8 periods each, and Unit 3 gets 10 periods. The complete unit-wise table is in the Complete Syllabus section above.

Is Green Energy & Engineering a theory subject or a practical subject?
It is a pure theory subject (L–P 3 – 0, no practical hours).

What are the most scoring topics in Green Energy & Engineering?
The system descriptions, solar PV and wind turbines from Unit II, biogas and hydrogen from Unit III, are the most scoring, because a labelled diagram with a short working description earns full marks. The comparison tables are the next best scorers. But since every unit carries 12 marks, no unit should be left out.

Which books should I refer to for Green Energy & Engineering?
The syllabus lists 6 books and 1 NPTEL course, including Non-Conventional Energy Resources by D. S. Chauhan and S. K. Srivastava, among others. The full list is in the Complete Syllabus section above.

Do I have to study Green Energy & Engineering, or can I choose another subject?
You choose. Green Energy & Engineering is one of the four Elective Specialization options in the 6th semester — a student picks any ONE of them. The other options are Maintenance of Machine Tools, Non-Destructive Testing and Product Design & Development.

How can I download the Green Energy & Engineering syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Green Energy & Engineering

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Green Energy & Engineering Syllabus PDF

Download the complete Green Energy & Engineering syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Green Energy & Engineering Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Production), updated and approved by the Board of Technical Education, U.P., Lucknow, in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-language summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →