SA-21/06, C-11, Asapur, Varanasi, UP support@kamaldnp.com +91 8318013442
BTEUP Syllabus

Maintenance of Machine Tools — BTEUP Mechanical 6th Semester Syllabus 2026-27

KAMALDNP Raj Kamal
November 18, 2026
9 Min Read
Maintenance of Machine Tools — BTEUP Mechanical 6th Semester Syllabus 2026-27

Maintenance of Machine Tools — What This Subject Is About

A lathe that is a tenth of a millimetre out of alignment makes scrap all day, and the fault is found not by guessing but by testing: a dial gauge here, a spirit level there, a straight edge across the bed. Maintenance of Machine Tools is the subject that teaches that testing: the types of maintenance, the measuring instruments, lathe maintenance, geometrical checks, and the care of lubricants and coolants. It is the most hands-on theory paper of the 6th semester: every unit describes work done with tools in hand.

The subject covers five units in 42 periods: the meaning and types of maintenance; testing of machine tools; lathe maintenance; geometrical checks and alignment; and lubricants and coolants. The paper is a pure theory paper — 60 marks external in 3 hours, with 40 internal marks — and every unit carries the same 12 marks, so no unit can be skipped. The 6th semester is the even semester, so this paper is examined in the even-semester session.

Subject 6.4.2 (Theory) • Total 100 Marks • 3 Credits • L 3 – P 0 • 6th Semester — Mechanical Engineering (Production) • Session 2026–27

Note: Maintenance of Machine Tools is one of the four Elective Specialization options in the 6th semester — you pick any ONE of the four. The other options are Green Energy & Engineering, Non-Destructive Testing and Product Design & Development. Whichever you pick, the paper is the same shape: 60 marks external in 3 hours, 40 internal.
Maintenance of Machine Tools syllabus — lathe maintenance, alignment tests and lubrication, BTEUP Mechanical 6th semester 2026-27
True, tight and well-oiled — Maintenance of Machine Tools is the craft of keeping machines accurate.

What You Will Study

Unit 1 — Maintenance (6 Periods, 12 Marks)

Objective, definition, types of maintenance, advantages of good maintenance, disadvantages of bad maintenance, instruments needed for maintenance.

Why maintenance matters — what good maintenance saves, what bad maintenance costs, and the instruments a maintenance team needs.

Unit 2 — Testing of Machine Tools (8 Periods, 12 Marks)

Measuring equipment and tools used for testing of machine tools: dial gauges, test mandrels, straight edges, squares, spirit levels, level measurement by water level, alignment by wire and measuring microscope.

The measuring equipment and tools used to test a machine tool's accuracy, and how the tests are done.

Unit 3 — Maintenance of Lathe (10 Periods, 12 Marks)

Lathe maintenance, drive belts, adjusting belt tension, gib adjustment (cross slide, compound slide), wiper pads, adjusting the tail stock clamp, alignment test on lathe.

Lathe maintenance in practice — alignment, adjustments and inspection of the machine's parts.

Unit 4 — Geometrical Checks and Alignment Tests (10 Periods, 12 Marks)

Types of geometrical checks on machine tools, various tests conducted on machine tools, alignment test on surface grinding and milling, details for testing various machine tools: slotter maintenance, driving pulley alignment checking, belt tension adjustment, pinion gear inspection, table jib adjustment.

Geometrical checks and alignment tests on milling machines, grinding machines, slotters and other machine tools.

Unit 5 — Oil Inspection and Coolants (8 Periods, 12 Marks)

Inspection of the drained oil for contaminants and wear debris with focus on visual inspection, preparation of coolants, practice on oil removing and filling for a gear box.

Lubricants and coolants — how to inspect them, what wear and contamination look like, and how gearbox oil is removed and refilled.

Complete Syllabus

The full examination scheme, the unit-wise marks distribution and the reference books from the official syllabus. The unit-wise topics are in the “What You Will Study” section above.

Examination Scheme

CodePaperTypeL – PCreditsInternalExternalTotal
6.4.2Maintenance of Machine ToolsTheory3 – 03Theory 40Theory 60 (3 hrs)100
Maintenance of Machine Tools Total34060100

Units at a Glance

UnitTopicPeriodsMarks
1Maintenance612
2Testing of Machine Tools812
3Maintenance of Lathe1012
4Geometrical Checks and Alignment Tests1012
5Oil Inspection and Coolants812
Total4260

Every unit carries the same 12 marks in the external theory paper, as per the suggested distribution of marks in the official syllabus — so the smartest preparation gives every unit its share of time.

Reference Books

As listed in the syllabus:

  • Er. Sushil Kumar Srivastava, Maintenance Engineering, Reprint 2016, S. Chand Publication.
  • Georg Schlesinger, F. Koenigsberger, M. Burdekin, Testing Machine Tools, 8th Edition, Pergamon Press, 1978.
  • K. J. Bag, Preventive Maintenance, ISTE Professional Centre Continuing Education Programme, Anna University Campus, Chennai.
  • Web: https://www.youtube.com/watch?v=f58SW0Hwcf0 — Principle of Maintenance, NPTEL, IIT Kharagpur.

How to Prepare for Maintenance of Machine Tools

Learn the instruments by what they measure. Dial gauge, spirit level, straight edge, test mandrel: each instrument has one job and one least count. A one-page table (instrument, measures, least count) covers half of Unit II.

Learn the lathe checks as a sequence. Bed, headstock, tailstock, carriage, lead screw: the Unit III checks follow the machine from end to end. Learn them in machine order and they are hard to forget.

Practise the alignment tests as steps. Every geometrical check is a procedure: set up, measure, compare with the limit, correct. Learn the procedure, not just the name of the test.

Keep the maintenance types apart. Breakdown, preventive, predictive, planned: four types, four different ideas, and the paper asks for all of them. One line each, with one example each.

Do not skip the oil unit. Lubricants and coolants (Unit V) look small but carry the same 12 marks: oil grades, coolant mixing (usually 1:20, oil into water), wear and contamination. One page of notes, learned cold.

Exam Tips

  • Attempt all five questions. The paper pattern gives three parts (a), (b) and (c) in each question, of which any two are to be answered. Pick the two parts you know best in every question, and do not leave any question blank.
  • Give the number with the instrument. A dial gauge reads to 0.01 mm, a precision spirit level to 0.02 mm/m. The numbers are the marks in this paper.
  • Draw the test set-ups. A dial gauge on a test mandrel, a straight edge on a lathe bed: a labelled sketch of the set-up is the full-marks answer for a test question.
  • Answer 'advantages and disadvantages' as two lists. Good maintenance vs bad maintenance, each type's pros and cons: short balanced lists score best.
  • Use the workshop's words. Alignment, backlash, wear, contamination, jib, gib: the paper's own vocabulary, used correctly, shows you have stood beside the machine.
  • Manage the 3 hours. About 35 minutes per question leaves a few minutes at the end to re-read your answers. Do not spend an hour on one favourite question.

Frequently Asked Questions

How many marks is Maintenance of Machine Tools worth in the 6th semester?
100 marks in total and 3 credits: internal assessment 40 marks (theory) and external theory paper 60 marks in 3 hours.

Which units carry the most marks in Maintenance of Machine Tools?
All five units carry the same 12 marks each in the external theory paper — there is no heavy unit and no light unit. Teaching time differs slightly: Unit 1 gets 6 periods; Unit 2 and Unit 5 get 8 periods each, and Unit 3 and Unit 4 get 10 periods each. The complete unit-wise table is in the Complete Syllabus section above.

Is Maintenance of Machine Tools a theory subject or a practical subject?
It is a pure theory subject (L–P 3 – 0, no practical hours).

What are the most scoring topics in Maintenance of Machine Tools?
The test procedures, lathe checks from Unit III and geometrical checks from Unit IV, are the most scoring, because a labelled set-up sketch with the steps earns full marks. The instrument table from Unit II is the next best scorer. But since every unit carries 12 marks, no unit should be left out.

Which books should I refer to for Maintenance of Machine Tools?
The syllabus lists 3 books and 1 NPTEL video, including Maintenance Engineering by Er. Sushil Kumar Srivastava, among others. The full list is in the Complete Syllabus section above.

Do I have to study Maintenance of Machine Tools, or can I choose another subject?
You choose. Maintenance of Machine Tools is one of the four Elective Specialization options in the 6th semester — a student picks any ONE of them. The other options are Green Energy & Engineering, Non-Destructive Testing and Product Design & Development.

How can I download the Maintenance of Machine Tools syllabus PDF?
The PDF is free to download — use the download link in the Download section below. It is prepared by KAMALDNP from the official BTEUP syllabus.

Related Syllabus Posts

Notes, Question Bank & Practice Sets — Maintenance of Machine Tools

The syllabus PDF on this page stays 100% FREE — no login, no payment, always. The study material below is a paid KAMALDNP product: buy once for just ₹10 and you get both the Hindi and English PDFs. Every PDF is generated with your name and enrolment number and is password-locked, so it remains personal to you. After purchase, the PDF is also sent to your email, and it is always available for download on the My Downloads page.

Short Notes (English + Hindi) — ₹10

Unit-wise short revision notes prepared from the official BTEUP 2026-27 syllabus of this subject.

Buy / Download — My Downloads
Question Bank (English + Hindi) — ₹10

One original practice (model) paper with a model-answer outline. This is a KAMALDNP practice paper — NOT a BTEUP board paper, and no question in it is promised to appear in your exam.

Buy / Download — My Downloads
Practice Sets (English + Hindi) — ₹10

10 Practice Sets — practice/guess sets only (no verified previous-year board papers available for this subject yet)

Buy / Download — My Downloads

Already purchased? You will find the Download button on the same My Downloads page — you will not be charged again.

Download the Maintenance of Machine Tools Syllabus PDF

Download the complete Maintenance of Machine Tools syllabus PDF below — prepared by KAMALDNP, with the full topic list, examination scheme and reference books.

Download the Maintenance of Machine Tools Syllabus PDF

Source: IRDT Kanpur NEP-2020 curriculum for the Diploma in Mechanical Engineering (Production), updated and approved by the Board of Technical Education, U.P., Lucknow, in the C.D.C. meeting held on 16.07.2026. Topic lists follow the official syllabus; short explanations are the author's own plain-language summaries, not syllabus text. Please confirm with your own polytechnic for any local changes.

Comments (0)

Share your question or experience about this syllabus. Your comment will appear after review.

No comments yet — be the first to share your thoughts!

🤖 KAMALDNP AI Assistant

Ask about courses, website & more

Hi! I'm KAMALDNP AI Assistant. Ask me about our courses, website features, or anything else! 😊
Please wait 5s...
🤖 KAMALDNP Assistant ✕

Request human callback:

🔐 Login Required
✕

Please log in to download. You will stay on this page after logging in!

New here? Register now →